I've recently been using amarok and liked it a lot. I unchecked the show system tray in configuration, restarted amarok and then checked it again. Now amarok crashes whenever I go into configuration or browse through local files. I have tried reinstalling and deleting the directory ~/.kde/share/apps but no use.
View 1 RepliesI have installed apache using the appropriate 'yum' commands.I didn't experience any problems during the installation.My problem is that I am not able to see any php file I created myself (I have installed php too).The only php file I can see is the one I created using this:
Code:
su -c 'echo "<?php phpinfo(); ?>" > /var/www/html/index.php'
Then I am able to see the information from the above file.
[code]....
log in ubuntu (i use Ubuntu v9.04) , and i go to Places->Computer, but i can't access to my local disks?A notice of error is:Code:Could not display "computer":Nautilus cannot handle "computer" locationsWhat's this error? How to fix it or only reinstall Ubuntu?And i have another question: How to install GTK+ , i want to find GTK+ deb file, but i can't. I install GTK+ by compile source code, but when i compile, in my ubuntu don't find package ATK,cairo.... But i don't know exact what's ATK, cairo. I can't find it.
View 1 Replies View RelatedAfter upgrading to KDE 4.6 (Factory repos) Amarok crashes every time I try to play a song. Changing between Gstreamer and Xine doesn't make any difference.
View 9 Replies View RelatedI am using Ubuntu 9.10 and having trouble with Amarok. It crashes on on startup. I have read that the issue is not with Amarok but rather phonon. Is there a solution? Application: Amarok (amarok), signal: Segmentation fault [Current thread is 1 (Thread 0xb68cb950 (LWP 13047))]
Thread 5 (Thread 0xb527bb70 (LWP 13054)):
#0 0x003e9422 in __kernel_vsyscall ()
#1 0x07fcb142 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0
#2 0x037168d4 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6
#3 0x075519ff in ?? () from /usr/lib/libxine.so.1
[Code]...
I use to use amarok a lot back in the day and loved it. Saw that I could install it on ubuntu (which was a great suprise, since I though amarok was a KDE application).
Anyways, EVERY time I load amarok, I see it pop up for about 1 or 2 seconds and then my xserver (is that what it is called? the GUI portion of linux) crashes and restarts. EVERY SINGLE TIME. Open amarok, xserver crashes and restarts.
I'm on Ubuntu 10.04, Amarok version 2.3.0, Using KDE 4.4.2 Whenever I start Amarok and try to play any song, amarok crashes, smetimes a few seconds of the music can be heard even if the Amarok window is no longer there. This is my yakuake code from starting Amarok to the crash, I don't really know where to start looking for an answer.
Code:
daniela@Daniela:~$ amarok
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
[Code]....
I have two kinda weird problems that have been preventing me from wasting my time!
1. I can go to a flickr page and see the first picture fine. When I use the browse buttons and/or try and change to another picture, firefox crashes.
2. When viewing pictures in facebook (the only reason I use it is to share pictures with my far-off family who doesn't get to see my kids often) the pictures are very badly pixelated.
I'm using an Acer Aspire laptop (Intel 915 graphics, celeron processor, 1.5GB ram) with a completely up to date Fedora 12 installation. The weird part is, my wife's netbook, (1GB ram, Intel 945 graphics) with Fedora 12, displays everything fine. I'm cometely stumped how one machine is having such issues while another isn't. This problem existed in F10 when I used up until the F12 release so I'm presuming it is a graphics card problem (???) since the software and OS has changed.Does anyone know what might be going on or how I can check?
I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?
View 2 Replies View RelatedI have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
I upgraded my fedora 12 to F13 last night by Fedora 13 DVD. then i updated my F13 using this code:
Code:
#yum update
so when i tried to use amarok it couldn't scan my collection and crashes.
after that i removed my amarok folder using this code:
[Code]....
I have Suse 11.3 KDE and every time I opened an mp3 file, Amarok opened and closed immediately reporting a new bug everytime. So I followed this thread Amarok Not Launching I have uninstalled Amarok through Install/ Remove software. But I am not able to find this folder to delete, as mentioned in above post: Delete the directory ~/.kde/share/apps/amarok
View 9 Replies View RelatedSuse 11.3 KDE 4.4 Amarok - Standard version that comes with 11.3 I start Amarok, which still worked fine yesterday and this morning. I get the Amarok splash screen and then it disappears and the Crash Handler with the following message appears.
[code]...
When I launch amarok-2.4.0 under KDE 4.6 it alwasys crashes with the error message symbol lookup error: amarok: undefined symbol: _ZN7OcsData8addDonorERK7QStringRK12KAboutPerson. What is wrong here?
View 7 Replies View RelatedWhen I try to start amarok, I get a splash screen, and then it crashes with a segmentation fault. I have tried removing the amarok rpm's, and reinstalling it, but that didn't work out. I don't get enough information from the backtrace, but I also can't figure out which packages I need to get more debugging information. I have been subscribed to development repositories, so I guess I have some unstable packages on my system, but don't know which ones. So this is what I get: After starting amarok from Konsole, I get the following output:
[Code]...
The other day I fully updated (by updating all in repository unconditionally) to KDE 4.4 final. After that it seems amarok crashes when I try to start it. Here's the "Developer Information" from the crash.
View 8 Replies View RelatedMy amarok crashes everytime. I saw an similar problem posted at OpenSUSE 11.3: Amarok crashes on startup. And I suspect this is because of the nvidia drivers that I installed, just as is the case in the above mentioned thread. What should I do to overcome this now? Is there a solution posted? After I read the above thread, I deleted all the repositories except for the four. I had these following repositories prior:
[Code]...
When I attach my MP3 player (a Sony S series Walkman), Amarok crashes. It is a problem with libmtp, but I don't know how to resolve it. The player can connect as mass storage or mtp (note that connection mode is not selectable on the device), but Amarok automatically claims it as mtp and promptly crashes, if I connect the player without Amarok running and mount it as mass storage then start Amarok, it still claims it as MTP, crashes and blocks the device so it is no longer accessible as anything. I would just uninstall libmtp as I have no use for it, but Amarok requires it. The options as I see them: 1) get a version of libmtp that doesn't screw up with this device 2) stop Amarok claiming mtp devices (no settings for this - anything in config file?) 3) stop linux recognising this as an mtp capable device so Amarok doesn't try to claim it.
View 5 Replies View Relatedecently (since upgrade to Ubuntu 10.10) being having problems with Amarok randomly crashing.There doesn't seem to be any pattern and it normally just disappears and music stops. Occasionally it comes up with the KDE crash tracker but it can't retrieve the debug information (although i do have amarok-dbg installed, not sure what else i need for that to work though)Anyway i have run it from the terminal and this is the output i got towards the end:
Code:
amarok(7287)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://upload.wikimedia.org/wikipedia/commons
[code]....
For the last few releases, I've remained with Amarok 1.4, but now that I've deemed Amarok 2 stable enough, I've upgrade, however, the lyrics to my songs (which I put in a lot of effort in downloading), are not reflecting. Is there anyway to export lyrics from Amarok 1.4 and import them in Amarok 2?
View 1 Replies View RelatedSo I don't like the new Amarok as much as the 1.4 version, so I want to install the older release. I download the source files, extract it and go into the directory. I type ./configure and recieve an error about kde-config not being installed, but "ln kde4-config kde-config" (or something like that) solved that problem. But now I encounter this problem after ./configure:
Code:
I already have a version of Qt installed (it's necessary for KDE, is it not?), but it's not between 3.3 and 4.0. I've read online about how if you install both the 3.3 and the version included on Slackware 13.1 of Qt there would be problems. I also read that you could find the necessary Qt files in the sources discs, but I'm not sure what files to install:
Code:
This is Slackware 13.1, by the way.
Do I have to shamefully resign my pride to Amarok 2.3 or can I install 1.4 in some way? And if you've gotten this far, thanks for reading and potentially responding.
Amarok v2.3.1 won't play radio streams. How to configure proxy?
Lyrics fetching works and konqueror is also configured properly.
Using Gnome.
One of Konqueror's unique features is that i can name a local process as the action in a form. When i submit that form, the local process is executed. Very helpful for certain offline tasks. What would make it even better is if i could find a way to pass some data to that local process from the html page. This could be the content of a hidden input item, etc. Alternatively, if there is a way for Konqueror to create or update a local file with data from the html page, that would acheive the same end.
View 1 Replies View RelatedEverytime Banshee tries to switch songs from a local folder it crashes with. I have tried completely removing it and reinstalling but that did nothing. Here is what I get when I run it from a terminal.
Code:
[Info 20:56:57.939] Running Banshee 1.6.1: [Ubuntu 10.04 LTS (linux-gnu, i486) @ 2010-06-18 09:51:55 UTC]
[Info 20:56:59.862] All services are started 1.027051
[Info 20:57:00.666] nereid Client Started
^This is startup.
Code:
(Banshee:2996): Gtk-CRITICAL **: gtk_widget_event: assertion `WIDGET_REALIZED_FOR_EVENT (widget, event)' failed
^This happened a short while after startup.
Code:
Unhandled Exception: Mono.Data.Sqlite.SqliteException: The database disk image is malformed
database disk image is malformed
at Mono.Data.Sqlite.Sqlite3.Reset (Mono.Data.Sqlite.SqliteStatement stmt) [0x00000]
at Mono.Data.Sqlite.Sqlite3.Step (Mono.Data.Sqlite.SqliteStatement stmt) [0x00000]
at Mono.Data.Sqlite.SqliteCommand.ExecuteNonQuery () [0x00000]
at (wrapper remoting-invoke-with-check) Mono.Data.Sqlite.SqliteCommand:ExecuteNonQuery ()
at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Mono.Data.Sqlite.SqliteConnection connection) [0x00000]
^This is the crash.
I know this is probably an extremely easy question... but does anyone know how to browse the files of an mp3 player in ubuntu 10.04? when i insert it it shows up in rhythmbox, but i'm unable to browse the files manually... i also looked under media and it isn't showing up. any ideas?
View 2 Replies View RelatedCan I connect an Iphone to Ubuntu and brows files on it out of box? Or do I need any program for that.. Now I mean axessing files from the memory/mem-card not the phone itself..
View 1 Replies View RelatedI simply want to move files between my jailbroken iphone 3G and my Karma desktop.Is there an easy way to achieve this. I don't really want to use Virtualbox with Win installed into it and thereafter Itunes.I don't need or want to sync anything - just move the odd files around.I installed ifuse but all I can see is the DCIM i.e picture folder when I connect it to the desktop.Right now I have to email the file to the iphone and save it like that but this is just a workaround
View 3 Replies View RelatedI am new to XUbuntu and I cant seem to browse my other hard drives connected to my system, It keep saying Connecting to "60 GB Filesystem" failed.Authentication is required.
how do I browse my other hard drives in Xubuntu?
the problem is Amarok cant play these files so i dont have them in collection till i dont give here password, so amarok must again Scan all the files (about 6000 songs) and it takes long and i want to know any way to skip this.
View 4 Replies View RelatedMy hard disk has two xubuntu 9.04 installation.
one installation in partition /dev/sda1
and another installation in partition /dev/sda5
if I running xubuntu installation in partition /dev/sda5, how to browse other Xubuntu installation files in partition /dev/sda1?