I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?
View 2 RepliesI have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.
Failed to open "/ on". Specified location is not supported.
Every time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.
I need to be able to connect to my storage server...
Like the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.
View 2 Replies View RelatedI have a external harddisk attached to my linux PC.I have a laptop having windows 7 on my network.I want to to be able to open up the folder in the external harddisk(linux partition) and check the files from my laptop. People suggest samba. But I am not able to configure correctly. Please excuse me and give me few detailed instructions.
View 4 Replies View RelatedI have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
I have installed apache using the appropriate 'yum' commands.I didn't experience any problems during the installation.My problem is that I am not able to see any php file I created myself (I have installed php too).The only php file I can see is the one I created using this:
Code:
su -c 'echo "<?php phpinfo(); ?>" > /var/www/html/index.php'
Then I am able to see the information from the above file.
[code]....
log in ubuntu (i use Ubuntu v9.04) , and i go to Places->Computer, but i can't access to my local disks?A notice of error is:Code:Could not display "computer":Nautilus cannot handle "computer" locationsWhat's this error? How to fix it or only reinstall Ubuntu?And i have another question: How to install GTK+ , i want to find GTK+ deb file, but i can't. I install GTK+ by compile source code, but when i compile, in my ubuntu don't find package ATK,cairo.... But i don't know exact what's ATK, cairo. I can't find it.
View 1 Replies View RelatedI've recently been using amarok and liked it a lot. I unchecked the show system tray in configuration, restarted amarok and then checked it again. Now amarok crashes whenever I go into configuration or browse through local files. I have tried reinstalling and deleting the directory ~/.kde/share/apps but no use.
View 1 Replies View RelatedI have used /etc/fonts/local.conf to control how the fonts looks like in my laptop, which runs a Gentoo. In particular, I don't want anti-aliasing. I copied the file to my Debian desktop, but it seems the file doesn't take effect, even after reboot. Do I need to do something else to make it take effect?
View 5 Replies View RelatedEvery time I boot my machine, some of the playback values in alsamixer are set to 0 and are muted, so I have no sound.
The thing is, I have tried setting these to normal levels and then run sudo alsactl store. Then, if I run sudo alsactl restore after I reboot, the sound comes back up. However, if I have alsactl restore in /etc/rc.local, it doesn't work: I still get muted sound when I reboot. I have to run sudo alsactl restore manually each time.
I have already checked whether /etc/rc.local runs at startup, and it does. Also, I know that /var/lib/alsa/asound.state contains the correct values, because when I run sudo alsactl restore, the sound returns to normal levels. So what remains is either alsactl restore doesn't work in /etc/rc/local, or something runs after it and mutes the sound.
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies View RelatedI have the 5 Debian 5.02 DVD/ISOs, and would like to set up a local server from which to perform installations using a PXE bootloader and the local LAN. Any pointers to how I might accomplish this? All of the online resources I've found for network-based installs expect to do all downloading from a remote mirror, and I would prefer to limit my network traffic to the local LAN. Also, I want to install to multiple new hosts, and would like to avoid doing a lot of babysitting and swapping DVDs in and out of the drives (and some hosts are without DVD readers).
View 12 Replies View RelatedI'm trying to set up a *simple* MTA in my local network. The only thing it should be able to do is send system / daemon mails to admin@mylocaldomain. but at the moment I'm pretty much overwhelmed by everything i *should* know in order to set up this MTA
my infrastructure:
- servers:
* test01.mylocaldomain --> should send mails (with exim) to admin@mylocaldomain
* dns01.mylocaldomain --> dns-server
* mail.mylocaldomain --> mail-server (postfix / iredmail package)
I configured exim to be in "internet"-mode. now i have a variety of errors I can choose from (and a variety of solutions that i don't like ).. my test is always an email from test01.mylocaldomain:
echo "Hello World" | mail -s Testmail admin@mylocaldomain
- after running the config, i get the error: admin@mylocaldomain: all relevant MX records point to non-existent hosts --> google says, edit and udpate update-exim4.conf.conf --> dc_relay_domains='mylocaldomain' --> but this exim installation should not be a relay at all. it should only be able to SEND (to this domain), not deliver it. or do i get something wrong?
- after i added dc_relay_domains='mylocaldomain', i get --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 550 5.1.1 <root@mylocaldomain>: Sender address rejected: User unknown in virtual mailbox table --> but i don't want to create an account on the mailserver for the SENDER...
- ...so i thought, i'd config exim with the domain "test01.mylocaldomain" (including the server name), so that the sender is clearly from another domain than the mail server handles (e.g. user@test01.mylocaldomain).. but then i get this --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 450 4.1.8 <root@test01.mylocaldomain>: Sender address rejected: Domain not found
I really just wanna send mails in my local network.
I will see ipcam in my local network from my tablets. I'm install server/client but I can't even ping my Ipcam from my tablet.I'm ping my ipcam from my server
Code: Select allping 10.42.0.22
PING 10.42.0.22 (10.42.0.22) 56(84) bytes of data.
64 bytes from 10.42.0.22: icmp_seq=1 ttl=64 time=0.639 ms
eth1:1 Link encap:Ethernet HWaddr 00:25:22:1c:6e:05
inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.42.0.1 P-t-P:10.42.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1775 errors:0 dropped:0 overruns:0 frame:0
[code]...
my tablet can receive ip, can see ftp on server but can't see anything in my home network.
I have three Debian systems running, along with several XP laptops, PS3 and two DirecTV systems. I use two of the three Debian systems as media servers, and the third is an older system mostly for playing around with. My home network is running fine with the following nuisance. The two newer Debian (Lenny) systems are <barney> and <mitzi>, the older is named <oscar>, running Debian Sarge 3.1. From either locally or remote login to <barney> and <mitzi> I can ssh into either of the other two systems, however when logged into <oscar> I cannot ssh by name to either of the other systems. e.g. ssh: mitzi: Temporary failure in name resolution..However, from <oscar> I can ping outside my network (e.g. ping www.google.com) with no problems.I can also ssh to the other systems via IP address, just not by name.
I've compared the /etc/ssh/ssh_config, /etc/resolv.conf, /etc/ssh/sshd_config and other files between the two systems and not seeing anything peculiar. arp, route, etc., don't show different behavior between the systems either.
At home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedI have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View RelatedI'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies View RelatedI have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies View Relatedi seem to have encountered a problem with thunar since upgrading gtk2. about once every fortnight i'll do an apt-get update/upgrade. today a lot of gtk2 libs were upgraded. ever since thunar won't recognise mouse clicks to open any folders in the detailed view, and i'm not entirely sure how or if i can roll back the packages with apt. synaptic won't let me force versions. running squeeze 64 bit btw.
View 14 Replies View RelatedThunar, for some reason, always seems to become non-response and consumes 100% CPU after I open a certain folder on my external hard drive. What could be the cause of this? I've tried opening the same folder on Windows and it didn't give me any problem, so I'm assuming that the problem lies within Thunar, and not the external hard drive itself.
View 3 Replies View RelatedI'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
For some time (I don't remember exactly how long/since when, maybe since I switched to i3 window manager?) I have the problem from title.
Chromium browser uses completely different programs to open files than file browser (thunar). And most of the time thunar has associations I want. For example thunar opens PDFs with iceweasel, and chromium opens them with GIMP (!), note that I have never changed this king of settings. Until I changed it today chromium also used Baobab (I didn't even know it existed before I saw it) to open directories ("show file in directory" for downloaded files).
I know how to change for a single file type (at least for browser), but is there some way to set all file types to something sensible and keep both, browser and thunar in sync without doing all of that manually? Or at least revert it all to default?
Debian version: latest "testing" version. (I use testing because I really need up to date versions of a lot of programs)...
I am running wheezy + xfce. When I attempt to mount any external volume in Thunar, I get a message saying "Unable to mount-- not authorized." This is problem #1. A bigger problem that I think is related is my wireless. Logged in as a normal user, I cannot connect to any wireless networks using network-manager. My wireless card is functional and I can see all the networks around me, but when I click on one to connect, nothing happens. No password prompt, nothing. Strangely, when I log in as root, wireless works flawlessly. I am a member of the netdev group.
View 4 Replies View RelatedI'm running 64-bit Debian testing Xfce and can't get Thunar to generate thumbnails for video-files in ogg-format. It works for avi, mp4, flv, etc. I have thunar-thumbnailer and ffmpegthumbnailer installed.
View 1 Replies View RelatedI recently migrated a home folder to a new user name. I made the necessary changes with usermod and recursively chown-ed the directory as the new user. However, one problem I've had is that Thunar is no longer showing thumbnails for images and videos. I rm-ed the .thumbnails directory thinking that it would force creation of new thumbnail files, but this didn't work. The directory stays empty.
View 7 Replies View RelatedI cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies View RelatedI'm using Debian 8 Xfce and now using Engrampa as default archive manager. But I can't do "Extract here" right click in Thunar, returning error "No suitable archive manager found". How to get Thunar know Engrampa as its archive manager?
View 0 Replies View Related