Ubuntu Multimedia :: Amarok Random Crashes \ Can't Retrieve The Debug Information?
Dec 21, 2010
ecently (since upgrade to Ubuntu 10.10) being having problems with Amarok randomly crashing.There doesn't seem to be any pattern and it normally just disappears and music stops. Occasionally it comes up with the KDE crash tracker but it can't retrieve the debug information (although i do have amarok-dbg installed, not sure what else i need for that to work though)Anyway i have run it from the terminal and this is the output i got towards the end:
Code:
amarok(7287)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://upload.wikimedia.org/wikipedia/commons
[code]....
View 2 Replies
ADVERTISEMENT
Feb 26, 2010
In Amarok 1 in the playlist tab you could choose to make a playlist of 50 random from your collection.
I start using Amarok 2.2.90 now. Where did they hide this functionality?
View 9 Replies
View Related
Sep 5, 2010
I've got Ubuntu 10.4 and have been using Rhythmbox to play CDs. When I put a CD in it would always be recognised and Rhythmbox would display the artist and song titles. Today I installed the following package:ubuntu-restricted-extrasThis was so I could rip CDs to MP3s. This worked, however it seems to have also had the side effect of preventing Rhythmbox from retrieving information about audio CDs. If I run Rhythmbox from a shell I get the following debug:
** (rhythmbox:2271): DEBUG: Loading the real store page
** (rhythmbox:2271): DEBUG: navigation requested to https://one.ubuntu.com/music/store-no-token
[code]....
View 1 Replies
View Related
Jan 28, 2010
I am using Ubuntu 9.10 and having trouble with Amarok. It crashes on on startup. I have read that the issue is not with Amarok but rather phonon. Is there a solution? Application: Amarok (amarok), signal: Segmentation fault [Current thread is 1 (Thread 0xb68cb950 (LWP 13047))]
Thread 5 (Thread 0xb527bb70 (LWP 13054)):
#0 0x003e9422 in __kernel_vsyscall ()
#1 0x07fcb142 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0
#2 0x037168d4 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6
#3 0x075519ff in ?? () from /usr/lib/libxine.so.1
[Code]...
View 2 Replies
View Related
Nov 30, 2010
I use to use amarok a lot back in the day and loved it. Saw that I could install it on ubuntu (which was a great suprise, since I though amarok was a KDE application).
Anyways, EVERY time I load amarok, I see it pop up for about 1 or 2 seconds and then my xserver (is that what it is called? the GUI portion of linux) crashes and restarts. EVERY SINGLE TIME. Open amarok, xserver crashes and restarts.
View 1 Replies
View Related
May 31, 2011
I'm on Ubuntu 10.04, Amarok version 2.3.0, Using KDE 4.4.2 Whenever I start Amarok and try to play any song, amarok crashes, smetimes a few seconds of the music can be heard even if the Amarok window is no longer there. This is my yakuake code from starting Amarok to the crash, I don't really know where to start looking for an answer.
Code:
daniela@Daniela:~$ amarok
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
[Code]....
View 4 Replies
View Related
Oct 28, 2010
Suse 11.3 KDE 4.4 Amarok - Standard version that comes with 11.3 I start Amarok, which still worked fine yesterday and this morning. I get the Amarok splash screen and then it disappears and the Crash Handler with the following message appears.
[code]...
View 3 Replies
View Related
Mar 11, 2011
When I launch amarok-2.4.0 under KDE 4.6 it alwasys crashes with the error message symbol lookup error: amarok: undefined symbol: _ZN7OcsData8addDonorERK7QStringRK12KAboutPerson. What is wrong here?
View 7 Replies
View Related
Jan 17, 2010
So my machine crashed and as far as I can tell it wasn't associated with any particular program. Is there some log I can investigate to see if I can determine what caused the crash?
View 2 Replies
View Related
Apr 10, 2010
At random times (approx. once a day), my whole ubuntu/gnome interface freezes. mouseover-animiations (for example on the icons in the taskbar) keep working, but clicking doesn't do anything anymore. On the keyboard, tab and arrows keeps working, but most other keys don't do anything. The only option seems to be to reboot. After that reboot everything is fine again (for a while)
Once the freeze happens, it freezes both the standard ubuntu panels but also the program I have open at that moment. It doesn't seem to be connected to a specific program I run.
Is there some log, or anything else that I can use to figure out where these freezes are coming from?
View 2 Replies
View Related
Feb 17, 2010
My firefox (Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.6) Gecko/20091216 Fedora/3.5.6-1.fc11 Firefox/3.5.6) on Gnome 2.26.3 will randomly crash, without any errors. /var/log/messages & /var/log/Xorg.0.log doesn't show anything that caused any errors. And it doesn't matter on which website(s) I'm busy with, it will just crash.
My PC has:
Intel Pentium(R) Dual-Core E5200 CPU
4GB DDRII Corsair RAM
3x 160GB SATAII HDD
Asus Nvidia 8800GT graphics card.
I have updated to the latest nVidia drivers
[root@Rudi-PC ~]# dmesg | grep nvidia
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: setting latency timer to 64
[code]....
This is on Fedora Core 12 x86 I have disabled the only 3 Firefox plug-ins that I installed yesterday, but this problem has been looming for a long time. Something interesting that I picked up is that Thunderbird will close randomly (very seldom though) as well, so I don't know if it's Firefox specific though.
I have picked up that it happens more often when my PC's memory usage is above 2GB RAM, and memtest86+ didn't indicate any memory problems. If I have less tabs open, it happens less often, but the more tabs I have open, the more often it happens. At the same time, on the same PC, when I'm in Windows XP SP3 (dual boot), I can have many more tabs open as well as Thunderbird, Quickbooks, Photoshop CS3 and some other applications, and it doesn't cash.
View 2 Replies
View Related
Jul 23, 2010
I get the newest fedora 13 dvd install & the live cd. Put on the disk and try to install. But the installer hangs on random times, so i cant install the system. Sometimes hangs on the anaconda start, others in the partition tables, others in the language section.
i try to run the live cd and install from there. Ok the first time the cd boot very nice . But when i try to install , the pc hangs again. Other times the boot from live even finish, when the last percents r coming, hangs again.
I all hangs, the dvd drive stop's and never return. So the Fan of cpu start to run very quickly and stay there forever until my patience permits.
So i use the ubuntu installer ( almost 4 years with u fedora, and need ubuntu installer!?shame on u) and search some information about the case. Yes, the last ubuntu boot,install, and run out of the box very quickly!
I see others with Dell & others brands still have problems with hangs and freezing , in boot and installs, so the first thing i search was the kernel parameters and try to use some flags.
I think the source of this kind of problem is the acpi . When i check the flag pci=noacpi or acpi=off , i have see that on the pre-anaconda start, when u choose the english language in text mode, clicking next the installer cant anymore find the media DVD, and the hard disk with the partition table. Sometimes the installer brings me the option to search in the ubuntu partitions, sometimes no.
How to debug and search the source of the problem? Any way? code...
View 2 Replies
View Related
May 10, 2011
I would like to extract debug information but I have some problems. For example, I have a executable a.out...
Quote:
nm -f sysv a.out | grep ".global_var" >vars.txt
With this command I extract all my variables. All of them are in .global_var section, and it give me follow information:
Quote:
CAN_station_n |08073258| D | OBJECT|00000001| |.global_var
CONTROLend |080732a7| D | OBJECT|00000001| |.global_var
[code]....
Well, I have only address of my vars, but I would like to know type var or struct of the variables. With dwarf dump I have all of information, but it is a mess...
Quote:
<1><117bc>: Abbrev Number: 32 (DW_TAG_variable)
<117bd> DW_AT_name : (indirect string, offset: 0x153d): draw_limits
<117c1> DW_AT_decl_file : 128
<117c2> DW_AT_decl_line : 207
[code]...
Is there any parser or way to put in order this information?? create a file with the follow information:
name of var - address - type - size - struct or not
View 5 Replies
View Related
Apr 7, 2010
I have a working build of crosstool - it was built for gcc 3.4.3 using glibc 2.3.5 going from 32-bit x86 linux to 64-bit alpha linux. As far as I can tell -- it compiles correctly (output of alpha emulation matches expected) but it has a major flaw. When I use the cross compiler and attempt to add detailed debug information, it compiles, but does not have the debug information. For example, when I execute:
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -g -o hello main.c
OR
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -gstabs -o hello main.c
I get a working alpha binary for hello world. BUT - when I run objdump - this is what I get
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump -g hello
hello: file format elf64-alpha
/home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump: hello: no recognized debugging information
Frustratingly - if I use my x86 gcc version 3.4.6 to do the compilation (same arguments, just using the x86 compiler, not the cross compiler) - it correctly embeds the debug information.
View 2 Replies
View Related
Mar 8, 2011
I know that I can get information from my running kernel using the uname command.My question is, how can I retrieve the kernel information from the other distros without booting into them?For example, I have Debian installed on /dev/sdd1 with two kernels in /boot. How do I go about getting the information from these kernels similar to what uname gives?
View 1 Replies
View Related
May 5, 2010
We have driversquery software in Windows which list all the hardware and storage drivers. I am aware of lsmod and modinfo command but is there any customized tool which on run should display the overall drivers (both storage and hardware) on linux Machine.
View 4 Replies
View Related
Feb 26, 2010
When I attempt to add software i get the following error:
Unable to Retrieve Software Information
This could be caused by not having available connection.
Cannot find a valid baseurl for repo: addons
To get my browser to work properly, I have to specify a proxy (manual) and use the IP address of our proxy server. After this, I'm able to get out through the internet
using my browser. Not sure why I fail to get software updates though. I used the same setting in Proxy - Control Center. Repository Manager show's CentOS-5 - Addons mirror list as :
[URL]
..and I can get to the site with the browser.
View 4 Replies
View Related
Nov 19, 2010
I'm on a corporate network .
When I attempt to add software i get the following error:
Unable to Retrieve Software Information This could be caused by not having available connection.
Cannot find a valid baseurl for repo: addons
To get my browser to work properly, I have to specify a proxy (manual) and use the IP address of our proxy server. After this, I'm able to get out through the internet using my browser.
Not sure why I fail to get software updates though. I used the same setting in Proxy - Control Center.
Repository Manager show's CentOS-5 - Addons mirror list as :
[URL]
..and I can get to the site with the browser.
View 2 Replies
View Related
Jan 10, 2010
I just bought a new hdd for my pc and reinstalled opensuse 11.2 Updated to amarok 2.2.1 and now i have a problem, my menu doesn't contain playback-->repeat/random options, they simply aren't there. amarok doesn't allow to play repeat and random simultaneously.
My problem is that i want to launch amarok with random playback....could this be done with some parameter through the terminal...(e.g amarok --playback-random)?
And ifanyone could say why I don't have certain menu items in amarok I would also be grateful. I think it is not related to the packman repo because i have the suse version of amarok.
View 1 Replies
View Related
Jan 19, 2010
I'm looking for a script that copies a random .jpg from a random folder in my ~/Pictures folder to my ~/temp folder with a standard filename. This file will then be displayed in Conky. I can fix the last part, but I cannot find a way to do the first part.
View 3 Replies
View Related
Jan 29, 2011
After upgrading to KDE 4.6 (Factory repos) Amarok crashes every time I try to play a song. Changing between Gstreamer and Xine doesn't make any difference.
View 9 Replies
View Related
May 5, 2010
Ive been having some problems with a Compaq computer with Lubuntu installed. The problem is that Xorg crashes at random displaying a white distortion on the screen and it usually doesn't let me go to a terminal and i have to force a shutdown.
the same happened when I tried to install Ubuntu but worse. Another side effect is that lubuntu at boot up displays its logo in 16-bit colors and then goes to normal colors.
how can i diagnose the random crashes?
View 3 Replies
View Related
May 6, 2010
(Update 5/19: I can now reproduce the bug either booted normally or from the live CD)
I've got the strangest bug and no idea what is causing it. While web browsing, sometimes the OS will completely crash. The crash always goes the same way:
First, it shows some text on the screen too fast for me to read, but it looks like red ASCII bullet points followed by white text, both over a black background.
* SOMETHING SOMETHING
* SOMETHING SOMETHING
* SOMETHING SOMETHING
After doing this for about half a second, it enters some kind of loop. The top half of the screen alternates between black/white vertical bars and solid black, while the bottom half of the screen remains solid black.
The only way I've been able to get out of this is by pressing the power button, and doing so shows me the *buntu logo (currently using Xubuntu) and then turns itself off.
Here's why I can't figure out what's wrong:The crash happens in GNOME, KDE, and XFCE. I have since uninstalled KDE because I was just checking to see if it still crashed.
Both Firefox and Google Chrome cause the crash.
No other programs seem to crash this way; just the web browsers. I've played games and listened to music for hours with no problems.
Opening the same pages doesn't reproduce the crash. It happens randomly every hour or so.
Even simple pages (like tabs of JPEGs with no HTML) cause the crash.
This is a recent install from an Ubuntu 10.04 CD.
I was previously using Kubuntu 8.04 and had no issues.
View 9 Replies
View Related
Jul 24, 2011
Recently my Firefox 5.0 started to crash randomly. This morning, it crashed twice within three minutes. I believe that it crashes mostly during loading something (such as a new tab), but it can also just crash when nothing is being done to it. I can be reading one page of text and it crashes. When it crashes, there is a "Submit a report" thing. When I click Restart Firefox, it doesn't. What I can think of is the use of Flash-aid and the addition of a 4GB bar of RAM. I re-executed Flash-aid because 1080p full-screen was choppy (still is). I don't think it is a Flash problem since with Gnash, Firefox also crashes. The RAM bar is a Lexar 4GB DDR3 SODIMM 1066-1333MHz. All other programs run correctly. I have re-installed Firefox, Firefox-branding and such in Synaptic. Still crashes.
View 1 Replies
View Related
Apr 22, 2010
I've been using rTorrent for a good two years now, and it's been running smoothly until about 6 months ago when random crashes and freezes would occur, between once per day and once per week. (I think it freezes if I run in screen, and crashes if I run it directly.) I've updated both rtorrent and libtorrent, updated cURL, and searched the internet near and far for a solution. I finally got this output (pastebin) after a crash today. I'm not sure how far up it goes, mainly because I'm not sure how I can scroll up the terminal window, and syslog doesn't seem to be of any help. Bottom line, I have no idea what rtorrent/libtorrent are doing, and random crashes are becoming very frustrating. For what it's worth I have a very large library (2000+) of shared files. Using version 9.04
View 3 Replies
View Related
Apr 12, 2011
I have no clue when it started. Since 10 days or so my computer crashes randomly when working in Ubuntu. Here are some facts: It can happen after one minute or several hours Every time, music is playing (MPD / PulseAudio), but my player runs mostly the whole time, so i am not sure if that's helping No specific action triggers the freeze, but i think a simple click is mostly involved When freezing the audio buffer is repeated every second or so The reset button does not work! I have to press the power button for 5 seconds to shut down the computer In Windows i did not experience any freezes, while i am doing hardware intensive stuff like gaming or audio processing
My Hardware:
CPU: Intel Core i5-2500K
MB: Gigabyte GA-P67A-UD3P
GFX: Gigabyte GeForce GTX 560 Ti Overclock
RAM: G.Skill RipJaws DIMM Kit 8GB PC3-10667U
SSD: Crucial RealSSD C300 128GB
View 9 Replies
View Related
Jun 4, 2011
About 1-2 times a day (3 today and it's just 9 AM here...) Gnome 3 decides to just not care about me any more, crashes and logs me out. No warning, no error on screen, just some black screen with text (like when shutting down the computer and it's stopping services) which lasts half a second, then back to the login screen.
Any ideas what might be wrong or where I could find some logs to post them here?
View 1 Replies
View Related
Jun 9, 2011
since the launch of Natty I have been having stupid reboots randomly happening, no warning or otherwise occurs just a full reboot. This only seems to happen when browsing (FF or Chrome) and I have disabled every one of my addons and done the usual checks - baffled I am...So I had this with the upgrade I did on launch day, so naturally I did a full wipe and fresh install. Same situation - personally I cannot deal with this happening all the time so I went back with another full wipe to Maverick and all has been well.
Anyway I thought leaving this a few weeks would mean the community would have seen and squashed dealbreaker bugs so I re-installed yesterday, today the crashes came back again so I throw myself to your wisdom - anyone else seen this, know where I should be looking for ideas? My logfiles don't show anything prior to the reboot as an error.In all honesty I do not want to go back to maverick and cannot believe that Ubuntu have released such a bug riddled distro.
View 3 Replies
View Related
Jun 28, 2011
i've been running Kubuntu 11.04 for a couple weeks now and trying to transition away from windows but i have had this problem with seemingly random system freezing and crashing i run kubuntu 11.04 64bit on a dell studio 1558 with a core i5, intel hd graphics, and 6gb ram.
my laptop after awhile will just freeze and all i can do is a hard reset, sometimes the screen will go black with a bunch of text, but i think that only happens when virtualbox is running b/c i can sometimes get back to the desktop, but it will freeze nevertheless (i run win7 in vbox for certain things i need like itunes and office).. i do notice that my laptop is getting pretty warm, but i don't know if that's related b/c it always did under windows
View 3 Replies
View Related
Jun 7, 2010
I upgraded my fedora 12 to F13 last night by Fedora 13 DVD. then i updated my F13 using this code:
Code:
#yum update
so when i tried to use amarok it couldn't scan my collection and crashes.
after that i removed my amarok folder using this code:
[Code]....
View 1 Replies
View Related
