Software :: Amarok Crashes With Segmentation Fault
Jun 24, 2010
When I try to start amarok, I get a splash screen, and then it crashes with a segmentation fault. I have tried removing the amarok rpm's, and reinstalling it, but that didn't work out. I don't get enough information from the backtrace, but I also can't figure out which packages I need to get more debugging information. I have been subscribed to development repositories, so I guess I have some unstable packages on my system, but don't know which ones. So this is what I get: After starting amarok from Konsole, I get the following output:
[Code]...
View 2 Replies
ADVERTISEMENT
Aug 14, 2010
After installing 11.3 as an update from 11.2 Kaffeine was working but Skype was not. Following various suggestions on this site I eventually got Skype working but now Kaffeine crashes every time I try to start it, this is the message I get:
Application: Kaffeine (kaffeine-xbu), signal: Segmentation fault
[Current thread is 1 (Thread 0x7f37268a1760 (LWP 26052))]
Thread 4 (Thread 0x7f37158fb710 (LWP 26054)):
#0 0x00007f3725043709 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
#1 0x00007f372612b951 in metronom_sync_loop () from /usr/lib64/libxine.so.1
#2 0x00007f372503ea4f in start_thread () from /lib64/libpthread.so.0
#3 0x00007f3723e2e82d in clone () from /lib64/libc.so.6
#4 0x0000000000000000 in ?? () .....
What it all means in very simple English and what an ignoramus can do to put it right? I should perhaps explain that although I have been using SuSE since version 9 I am totally incapable of understanding terminal work. I have so far managed, to a large extent, by trial and error but it seems that as versions get better it gets more and more difficult to fix problems. The help provided by OpenSUSE is very good but as one gets older it gets more and more difficult to remember instructions so that they can be followed - you need two pc's one being fixed and a working one to provide the instuctions side by side!
View 9 Replies
View Related
Feb 19, 2010
Using Ubuntu 9.10 & Pidgin 2.5.5 (upgraded from 2.5.2 while writing this post, but it did not fix the problem)This problem appeared after closing pidgin and trying to run it again i.e. restarting it (I have to restart it at some point after a long runtime, but that is another issue), it fully loads up (at least, it looks like it) and then instantly crashes with segmentation fault message. Judging from the first glance on the log, the crash has something to do with the windows live protocol.Of course, I have tried searching the web and this forum for an answer, but could not find any suitable one. There is one solution I have found, that is: (re)moving the .purple folder, but that "solution" is not really an option.
View 4 Replies
View Related
Feb 16, 2016
I noticed weird behavior with some of the installed applications. It all started with Guake when I wanted to use it. My shortcut key is F4, I hit F4 and nothing showed up. So I run Guake in terminal, everything fine. Then I hit F4 key and after few seconds Guake crashes with message "Segmentation fault". Nothing more, just that. Then I noticed that Audacity does the same, Gdebi too and even Reportbug app does that (I'm not sure about "segmentation fault", but the app crashes). I don't remember doing anything special or installing any app. All I can think of is this message when booting the system
Code: Select allsystemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
No idea, if there is any connection. Is there anyway, how I can maybe see more behind that "Segmentation fault" error? I found history.log in /var/log/apt/, so I'm thinking about looking into it and see if I really did not installed anything. I have a little feeling that it might have started after some update, but I'm not sure about that..
View 7 Replies
View Related
Dec 29, 2009
I am using openSuse 11.0 and have installed Thunderbird 3 (MozillaThunderbird-3.0.0-15.1) from the mozilla/openSUSE_11.0 repository of the build service. Thunderbird does not start, upon invoking it I get an instant crash with /usr/bin/thunderbird: line 130: 12025 Speicherzugriffsfehler $MOZ_PROGRAM "$@" (Speicherzugriffsfehler is the german equivalent of "segmentation fault"). I do believe, that this problem is somehow caused by some failed LDAP access.
I am using an LDAP-based user account which causes the behaviour described. For testing purposes I created a local user account, which could start thunderbird 3 without a problem. Starting and stopping nscd did not work, neither did the removal of .thunderbird and .mozilla. Here are the final lines of an strace dump:
[Code]....
View 2 Replies
View Related
Apr 9, 2011
Choqok has been working fine until today. Now, every time I start my computer and boot into openSUSE 11.4 x86-64 Choqok loads asks for the KWallet password which I enter, it then loads, but within seconds it crashes with a signal 11 Segmentation Fault. How do I fix this? It was working the last time my computer was on which was yesterday. I have not changed anything since then.
View 1 Replies
View Related
Jul 15, 2010
Yesterday Totem started crashing - the window shows for a second and then dissapears. Reinstalling via synaptic didnt help.Invalid column number 6 added to iter (remember to end your list of columns with a -1)Segmentation fault.I removed all installed gstreamer codecs, and it still crashes, and I now I have no clue why I cant use the app.I`m using a fresh install of Karmik Koala (over my ubuntu 10.04 without a format )
View 2 Replies
View Related
Nov 4, 2010
I've been having a bit of trouble with Nautilus for the past few days; as soon as I log in, Nautilus starts opening "Starting file manager" windows uncontrollably, and I have to 'killall nautilus' to stop it.
If I try and run nautilus from the terminal, I'm merely given the output code...
View 5 Replies
View Related
Aug 31, 2011
I got a problem with Okular crashing. This is the error message i get
Excutable okular PID 4927 Signal: Segmentation fault(11)
The PID is a different number each time i try to open a file. What could be causing this.
View 1 Replies
View Related
Nov 14, 2010
X crashes and reports a segmentation fault, address nil. I've been using the generic Radeon driver without any problems, until now.
View 14 Replies
View Related
Feb 1, 2011
Wasting too much time with this game the other day, the whole system froze up and I had to do a hard shutdown. Ever since then, the program won't load. No other programs seem to be affected. Tried uninstalling then reinstalling lbreakout2, to no avail.
Code:
~$ lbreakout2
LBreakout2 2.6.1
Copyright 2001-2005 Michael Speck
Published under GNU GPL
[Code]...
Of course, this could be nature's little way of telling me I should be doing less nostalgic arcade games and more homework, but still, would love to know if there's a fix for this.
View 1 Replies
View Related
Apr 19, 2011
I using a linux kernel v2.6.26.something. Distribution: OpenSuse 10.3. While writing a c program on linux in KATE, i used character pointers to declare a string like, for ex: " char *temp " but compilation with gcc gives me the error," Segmentation Fault " what is segmentation Fault Why does it occur or what are the reasons behind it?
View 14 Replies
View Related
Apr 11, 2011
I did a Yum update last Friday. It was done before 5.6 was released so I still have 5.5 + various updates. Yum is now giving me a segmentation fault when I try to run it. I believe it has to do with an improperly synchronized version of sqlite which was updated and then Yum stopped working. I'm guessing that installing the latest Yum RPM will fix the dependency issues. Will this throw me out of sync with for instance updating to 5.6?
View 5 Replies
View Related
Feb 26, 2016
VLC was behaving weirdly recently and when I've tried to run it with primusrun command (since I have optimus card) it gave me a segmentation fault
Code: Select allVLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
Segmentation fault
I've read on google that issue has been solved by a few people from updating the microcode, but I don't even understand what microcode is, I'm also not sure whether I should install amd64 or intel package for it?
Here is my lscpu
Code: Select all$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
[Code] ....
View 8 Replies
View Related
Jan 14, 2010
my KDE is making segmentation fault. KDE is not required to restart but this segmentation fault is making every time (after 2 min) when i login to kde/fedora. this is making me annoying.. my linux info is following:
uname -r # 2.6.31.9-174.fc12.x86_64
KDE: 4.3.4 (KDE 4.3.4)
problem:
[code]....
View 5 Replies
View Related
Feb 8, 2010
I updated kernel to 2.6.31.12-0.1-desktop yesterday and now i have problem with shutdown.
Everything goes as usual and system shutting down, but after all monitor keeps to work, and computer also doesn't halt.The last two lines i see on screen are:The system will be halted immediately Segmentation Fault Also i hear that some cooler or may be hard disk stops after this. But monitor and the rest of computer are still working With previous kernel i had no this problem.Reboot command works normal
View 9 Replies
View Related
May 5, 2010
Some time ago I had to reinstall all my packages under 64-bit OpenSuse 11.2. After that I can't get Skype working - Skype always gives me "segmentation fault" when trying to execute it (from command-line).
I've followed steps recommended in wiki, I've tried different versions (32-bit as well as 64-bit RPMs) downloaded from different repositories (including old 1.4.0.xx). Nothing changes anything.
I don't have any webcam and I've never had one, so I guess it cannot be related to that.
View 1 Replies
View Related
Feb 16, 2010
I just have installed Karmic Koala and have a problem running Firefox. I`ve seen that this is quite a common problem, but since I`m a newbie, I have no idea what to do. I have not found any solutions that would solve my problem yet. Every time I try to load a website including flash advertisings, Firefox just quits.
All the time I get this output.
Code:
View 1 Replies
View Related
Apr 28, 2010
I was in the process of installing something via apt-get. The laptop crashed halfway through, and now I cannot install anything new, do any updates/upgrades. I also cannot open Synaptic.When running apt-get in the terminal I get the following error:
Segmentation fault
View 3 Replies
View Related
Jul 4, 2010
I've been looking for an answer for this around all forums, but nothing works.So far, I've tried:
Editing "/etc/apt/apt.conf.d/70debconf" and adding
Code:
APT::Cache-Limit "33554432";
[code]....
View 3 Replies
View Related
Aug 6, 2010
I just made a pretty simple program in geany (GCC with default options)and I ended up with Segmentation fault. program is pretty simple and it performs binary search on an array.I know what segfault is but here I m clue less about why it is happening.and one thing more, the program runs fine in turbo C++ compiler.Same thing happened earlier too when I was making a program which included some simple string manipulation
View 1 Replies
View Related
Jul 16, 2010
I am programming an application with an ARM device with an embedded version of Linux. My application talks to a java application via socket. If there is any connection problems, it attempts the connection again. My problem is that after exactly 146 times, there is a Segmentation Fault. Apparently this happens in opening the socket, which is not successful after this amount of attempts.
Following, some code that I'm using:
The function for openning the socket and perform a connection:
Code:
View 2 Replies
View Related
Mar 11, 2010
What different between Segmentation fault and aborted
When I read about dbg I make different reason from the tutorial ....with the same code
Example in tutorial the gdb Display a message like this
Code:
And in my computer I have
Code:
I want to know what the different between them
View 2 Replies
View Related
May 11, 2010
I have a problem with a directory which contains my music collection. It can't be opened; all other directories work fine. I can cd into my ~/Music directory, but ls gives segfault and KDE programs hang when trying to open this directory. The problem probably has appeared after the rename of subdirectory under the Windows (don't remember particular ext3 driver; can check tomorrow).fsck says that the partition is fine. The whole disk is mounted on the single partition. Windows is located on another physical disk.Is there any way to recover my directory?
View 4 Replies
View Related
Mar 5, 2010
I have a centos server running nagios for monitoring. I restarted the machine, it is actually a console server anyway. After getting to the login screen, I typed in my user name but it never propt for my password. I can't even ssh into the system. So I tried to use the installation cd and enter into rescue mode where I typed chroot and was able to enter into the root environment. I was able to configure a network interface in the rescue mode and can ping the machine at this point, though can ssh still. In the root environment, I tried running couple commands. like try to restart the sshd. When I typed /etc/init.d/sshd restart, I got an error saying:
766 segmentation fault.
when I vi any thing I get error:
segmentation fault.
how can I solve this problem? What is causes this. Even in the event of restarting the machine, I see so many fails with segmentation fault.
View 5 Replies
View Related
Feb 15, 2011
I wrote a small c-code, which is based on a pseudorandom-alogrithm from the internet[URL]If i compile the code with "gcc test.c -o test -O2" the output is: "4194449".That's ok.I can compile the code without optimizations and the outut is the same.But if i compile the code with "gcc test.c -o test -O3" it creates a segmentation fault. But why? why this happens?Here the code:
Code:
#include <stdio.h>
// Code based on http://www.dreamincode.net/code/snippet342.htm
[code]....
View 3 Replies
View Related
Jun 16, 2010
simple program to create a segmentation fault:my problem is if i include the same code char *s="hello world"; *s='H'; in my project, it is not giving any seg fault, instead it runs without any problem. what may be the issue.
View 13 Replies
View Related
Sep 16, 2010
I would just like to ask why my red hat cannot log a segmentation fault in any of the log files located in / var/ log. I purposely tried executing a C++ program that segfaults but nothing was logged.
View 3 Replies
View Related
Jul 23, 2010
When I compile my C program on SUSE, I receive a segmentation fault error. To my knowledge, this occurs when a program tries to recall memory but is not allowed to. So I'm using GDB for the first time to solve this problem. After a series of commands, I reach this point:
Code:
#0 0x00002b13e1bab127 in getdelim () from /lib64/libc.so.6
#1 0x000000000040167b in main () at dmsp_cusp.c:158
Here's the offending code in dmsp_cusp.c:
Code:
157 printf("enter the input file name:");
158 getline(in_fname);
159 fp3 = fopen(in_fname, "r");
160 if(fp3 == NULL) {
161 printf("can't open input file %s",in_fname);
162 exit(1); }
View 1 Replies
View Related
Feb 20, 2010
Why is this giving me a segmentation fault ?
Code:
#include<stdio.h>
#include<string.h>
#include<malloc.h>
int main ()
[code]....
View 10 Replies
View Related
