The other day I fully updated (by updating all in repository unconditionally) to KDE 4.4 final. After that it seems amarok crashes when I try to start it. Here's the "Developer Information" from the crash.
View 8 RepliesI use to use amarok a lot back in the day and loved it. Saw that I could install it on ubuntu (which was a great suprise, since I though amarok was a KDE application).
Anyways, EVERY time I load amarok, I see it pop up for about 1 or 2 seconds and then my xserver (is that what it is called? the GUI portion of linux) crashes and restarts. EVERY SINGLE TIME. Open amarok, xserver crashes and restarts.
After upgrading to KDE 4.6 (Factory repos) Amarok crashes every time I try to play a song. Changing between Gstreamer and Xine doesn't make any difference.
View 9 Replies View RelatedI have Suse 11.3 KDE and every time I opened an mp3 file, Amarok opened and closed immediately reporting a new bug everytime. So I followed this thread Amarok Not Launching I have uninstalled Amarok through Install/ Remove software. But I am not able to find this folder to delete, as mentioned in above post: Delete the directory ~/.kde/share/apps/amarok
View 9 Replies View RelatedSuse 11.3 KDE 4.4 Amarok - Standard version that comes with 11.3 I start Amarok, which still worked fine yesterday and this morning. I get the Amarok splash screen and then it disappears and the Crash Handler with the following message appears.
[code]...
When I launch amarok-2.4.0 under KDE 4.6 it alwasys crashes with the error message symbol lookup error: amarok: undefined symbol: _ZN7OcsData8addDonorERK7QStringRK12KAboutPerson. What is wrong here?
View 7 Replies View RelatedMy amarok crashes everytime. I saw an similar problem posted at OpenSUSE 11.3: Amarok crashes on startup. And I suspect this is because of the nvidia drivers that I installed, just as is the case in the above mentioned thread. What should I do to overcome this now? Is there a solution posted? After I read the above thread, I deleted all the repositories except for the four. I had these following repositories prior:
[Code]...
When I attach my MP3 player (a Sony S series Walkman), Amarok crashes. It is a problem with libmtp, but I don't know how to resolve it. The player can connect as mass storage or mtp (note that connection mode is not selectable on the device), but Amarok automatically claims it as mtp and promptly crashes, if I connect the player without Amarok running and mount it as mass storage then start Amarok, it still claims it as MTP, crashes and blocks the device so it is no longer accessible as anything. I would just uninstall libmtp as I have no use for it, but Amarok requires it. The options as I see them: 1) get a version of libmtp that doesn't screw up with this device 2) stop Amarok claiming mtp devices (no settings for this - anything in config file?) 3) stop linux recognising this as an mtp capable device so Amarok doesn't try to claim it.
View 5 Replies View RelatedI have a strange problem which I've encountered for a long time but still weren't able to solve it. In openoffice writer, when clicking on extra->literature database the program immediately crashes. I encounter this problem with all the latest versions of Oo (3.2,3.1...) and on OpenSuse and on Kubuntu, so I guess it must be a widespread problem.
View 3 Replies View RelatedI have a native 64 bit 11.3 system with vmware 7.0x as an application. I have installed a win 7 guest which works fine 99% of the time. But if I try to plug usb headphones into my system after I boot win 7, it will crash entire system, but if I plug headphones into system before loading vmware, this does not happen. Is this a kernel issue?
View 1 Replies View RelatedI'm currently on vacation, and noted that the kdenlive version on my laptop (running 64-bit openSUSE-11.3 with KDE-4.4.4) will crash when loading a kdenlive file that has an audio track previously saved.
ie one can no longer reload a project, after saving it, if one has an audio track in the project.
I note my desktop (just before I went on vacation) did not have this behaviour. Has anyone else encountered this?
When I get back from vacation, I'll compare the packages between the two (ie between laptop and desktop). I note these packages on my laptop, which may or may not be relevant.
Code:
kde4-kdenlive-0.7.7.1-1.pm.2.1.x86_64
libmlt++3-0.5.6-1.pm.1.16.x86_64
python-mlt-0.5.6-1.pm.1.16.x86_64
libmlt2-0.5.6-1.pm.1.16.x86_64
mlt-0.5.6-1.pm.1.16.x86_64
sox-14.3.1-1.11.x86_64
ladspa-1.13-3.8.x86_64
I've installed Opensuse 11.4 and even have the multiboot working (at last) and firefox running at more than a snails pace, but this latest problem is really stumping me. I suspect it might be a little more fundamental than just amarok and mp3's but that's where I see it.
So, when I run amarok it asks if I would like to install MP3 support So I click on affermative and, since I added the neccessary repositories, it starts merrily into updating. Then after a few files it his this one:
libqt4-devel-doc-data
98MB. It downloads all the way to 99% and then the transfer rate drops from the 120KB/s I expect to 8B/s for a minute or so nad then it just restarts from 0%. It will do this a few times before offering the opportunity to skip. I did skip and it did a few more files successfully then hung up in the same way. It seems like any file larger than 1MB will not download.
I upgraded my fedora 12 to F13 last night by Fedora 13 DVD. then i updated my F13 using this code:
Code:
#yum update
so when i tried to use amarok it couldn't scan my collection and crashes.
after that i removed my amarok folder using this code:
[Code]....
I am using Ubuntu 9.10 and having trouble with Amarok. It crashes on on startup. I have read that the issue is not with Amarok but rather phonon. Is there a solution? Application: Amarok (amarok), signal: Segmentation fault [Current thread is 1 (Thread 0xb68cb950 (LWP 13047))]
Thread 5 (Thread 0xb527bb70 (LWP 13054)):
#0 0x003e9422 in __kernel_vsyscall ()
#1 0x07fcb142 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0
#2 0x037168d4 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6
#3 0x075519ff in ?? () from /usr/lib/libxine.so.1
[Code]...
When I try to start amarok, I get a splash screen, and then it crashes with a segmentation fault. I have tried removing the amarok rpm's, and reinstalling it, but that didn't work out. I don't get enough information from the backtrace, but I also can't figure out which packages I need to get more debugging information. I have been subscribed to development repositories, so I guess I have some unstable packages on my system, but don't know which ones. So this is what I get: After starting amarok from Konsole, I get the following output:
[Code]...
My Eclipse crashes after some updates on 11.3
I got an error :
./eclipse
The program 'Eclipse' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAlloc (insufficient resources for operation)'.
(Details: serial 163951 error_code 11 request_code 53 minor_code 0)
Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
I googled and found some solutions by downgrading xulrunner, but no dice.
if I install 10.04 beta, will it update to the final release or will I have to do a distro upgrade?
View 6 Replies View RelatedWhenever I check for updates, or download/install them, the openSUSE updater applet never shows the loading bar. The border showing the loading bars position is there but the loading bar never appears. It always sits at 0% but still successfully complete updating.
View 9 Replies View RelatedI'm on Ubuntu 10.04, Amarok version 2.3.0, Using KDE 4.4.2 Whenever I start Amarok and try to play any song, amarok crashes, smetimes a few seconds of the music can be heard even if the Amarok window is no longer there. This is my yakuake code from starting Amarok to the crash, I don't really know where to start looking for an answer.
Code:
daniela@Daniela:~$ amarok
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(4068)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
[Code]....
I'm running SUSE 11.3 32-bit and have run into an issue with the KDE Plasma Desktop crashing after login. I've submitted a bug report with the KDE folks, but thought it might be OpenSuSE specific. Details from the my KDE bug report [URL].. is as follows:
Application: plasma-desktop (0.3)
KDE Platform Version: 4.5.2 (KDE 4.5.2)
Qt Version: 4.7.0
Operating System: Linux 2.6.34.7-0.4-desktop i686
Distribution: "openSUSE 11.3 (i586)"
Information about the crash: What I was doing when the application crashed: After updating my OpenSUSE 11.3 32-bit workstation to the latest (as of October 22, 4pm EST) available here:
[Code]...
I've recently been using amarok and liked it a lot. I unchecked the show system tray in configuration, restarted amarok and then checked it again. Now amarok crashes whenever I go into configuration or browse through local files. I have tried reinstalling and deleting the directory ~/.kde/share/apps but no use.
View 1 Replies View RelatedI'm wondering why everytime I install "recomended" updates, my KDE or X server crashes completely! is there any guide or advice you can give me to succesfully update only the packages that are really needed?
View 9 Replies View Relatedecently (since upgrade to Ubuntu 10.10) being having problems with Amarok randomly crashing.There doesn't seem to be any pattern and it normally just disappears and music stops. Occasionally it comes up with the KDE crash tracker but it can't retrieve the debug information (although i do have amarok-dbg installed, not sure what else i need for that to work though)Anyway i have run it from the terminal and this is the output i got towards the end:
Code:
amarok(7287)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://upload.wikimedia.org/wikipedia/commons
[code]....
For the last few releases, I've remained with Amarok 1.4, but now that I've deemed Amarok 2 stable enough, I've upgrade, however, the lyrics to my songs (which I put in a lot of effort in downloading), are not reflecting. Is there anyway to export lyrics from Amarok 1.4 and import them in Amarok 2?
View 1 Replies View RelatedI installed Ubuntu 10.04 beta a couple of days back.This is the first time I am using a beta release.Some programs are crashing, although not frequently.
My question is - WHEN THE FINAL VERSION OF UBUNTU 10.04 IS AVAILABLE FOR DOWNLOAD, IS IT MANDATORY TO DOWNLOAD THE ENTIRE ? OR WILL UPDATING OR UPGRADING VIA THE system ---- administration --- update manager will upgrade my current beta version to the final release ???
All I see is: Quote: Loading vmlinuz Loading initrd.img
View 7 Replies View RelatedI have recently taken delivery of a Dell Inspiron mini netbook with Ubuntu on, and I am new-fangled .install updates, I clicked the (orange down-arrow) button, and it compalined "E: /var/cache/apt/archives/linux-image-2.6.24-22-lpia_2.6.24-22.45netbook9_lpia.deb: files list file for package `libxcb-shape0' is missing final newline"
View 2 Replies View RelatedI'm Dual-booting XP with Ubuntu Karmic Koala, heres my other specs:
CPU: Intel Pentium D 3.0Ghz family(15) model(4) stepping(4)
GFX: Geforce 7800 GT (had problems with GFX when I first installed Ubuntu, I had to update my drivers)
2 GB RAM
This is a nearly fresh install of Karmic Koala, I've only installed whatever updates I needed, graphics card drivers, KPlayer, and Google Chrome. Because I prefer Chrome over Firefox I immediately went to download Chrome, and Firefox would get to the Chrome page and then crash. I then got the Chrome install file from another computer and installed it. Chrome will not even launch, so I go to search the problem in Firefox and it crashes on ANY link I click in Google Search. I also tried to directly type websites into the URL box: it loads the pages title (Ex. "Yahoo! Mail"), and crashes before displaying the page at all.
This is a very odd problem to me as I used the same disc to install dual-boot with Win7 and Ubuntu on my laptop which works perfectly, and now this happens to my desktop.
Upon loading the music store in rythmbox it crashes the program. Probably not the best way to start off the new endeavor.
View 1 Replies View RelatedMenu working normally, game crashes on level loading:
Code:
]map wca1
Opening UDP/IP socket: *:44400
==== G_Init ====
------- Server Initialization -------
[code]...