General :: Non-System Disk Or Disk Error?
Oct 17, 2010
I have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies
ADVERTISEMENT
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
Jan 22, 2011
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
View 6 Replies
View Related
Feb 27, 2011
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
View 1 Replies
View Related
May 25, 2010
I have a computer I recently uninstalled the operating system from and was wanting to use Linux Ubuntu. After burning the cd and trying to install it to the computer it gives me "Invalid System Disk, Replace then disk and press any key." I am unsure how to start this and I am not even sure if I have all the files, I need to install the Linux Ubuntu 10.04 operating system step by step.
View 4 Replies
View Related
Jul 14, 2010
I am trying to install Oracle ebs and it falls over with this message:-
Code:
File Space Check :
-- database node space checks --
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = /d01/oracle/VIS/db/tech_st/11.1.0
required = 9967.0
actual = 9898.0390625
[code]....
View 3 Replies
View Related
Apr 29, 2011
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Aug 9, 2010
I got a HP mini 5102 yesterday and decided that Win7 wasn't doing it for me so I would put ubuntu netbook remix (10.04) on it. Set up a usb stick with the installer (using universal usb creator) and booted from it.
I decided that I would do a full install of ubuntu as I have no need for windows on this machine, hence I left no partition for windows when doing the install. The install went fine but when the machine restarted I was faced with a black screen and the error message "Non-system disk error".
At first I thought that I had messed up the boot order and it was trying to do a network boot as I was getting "PXE-E61: Media Test Failure", so I changed the boot order and fixed that problem but am still getting the non-system disk error.
I figured that I would try and boot from the usb again and see if I could redo the install or just boot from it for the time being but when I tried that I got the non-system disk error again (though, this time if I hit any key when the error message is showing it quickly flashes "geom error" before going back to non-system disk).
View 1 Replies
View Related
Jun 17, 2010
I am a long time Windows user and attempting to install Ubuntu Netbook 10 on my Acer Aspire netbook.I followed the steps:1) Downloading the Ubuntu ISO to my netbook hard drive.2) Installed Ubuntu from the netbook HD to USB using USB universal installer (also using the universal installer to format the USB)3) Set bios to first read USB deviceI receive the following message during the boot "Invalid system disk. Replace the disk, and then press any key.I have retried this process several times.
View 2 Replies
View Related
Feb 19, 2011
I was trying to install Ubuntu desktop and laptop edition on a Sony Vaio netbook from a USB drive, but after I select the entire disk to be used and hit enter I get this message No root file system is defined. correct this from the partitioning menu. If I try to start windows I just get s black screen.
View 9 Replies
View Related
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Oct 10, 2010
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
View 1 Replies
View Related
Feb 4, 2010
OS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
View 4 Replies
View Related
Sep 20, 2011
How to check if some folder is on a shared disk or on a local disk?
View 1 Replies
View Related
Feb 11, 2010
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
View 4 Replies
View Related
Oct 28, 2010
Booted up system and it stated please insert system disk press any key.So it sounds like my startup got corrupted? I running centos 4.5 on it (old yes) Is there a repair I can perform by a disk? Would it matter if I chose i386 or x86? I cant remeber which version was installed on it.
View 8 Replies
View Related
Nov 18, 2010
I don't understand disk sizes in Linux. I have a 500GB drive. It's ext4. I have run "tune2fs -m 0" on it to reserve the amount of space reserved for root to 0.
I'm using Ubuntu 10.04 that comes with a Disk Utility. When I run "System->Administration->Disk Utility (palimpsest)" the disk shows up as 500GB (see picture). But when I run df -h it shows up as 459GB. So, I don't understand the discrepancy.
When I run df I get the following:
Question: Why is Disk Utility showing me something different than "df"?
View 6 Replies
View Related
Dec 22, 2010
subject: LINUX - release.5.4- verify disk details from linux
with sfdisk -s I can see the disk capacity as the following:
sfdisk -s
/dev/cciss/c0d0: 143338560
total: 143338560 blocks
but how to see also the disk details as disk manufacture ... etc.
hdparm -i /dev/cciss/c0d0
/dev/cciss/c0d0:
HDIO_GET_IDENTITY failed: Inappropriate ioctl for device
View 1 Replies
View Related
Aug 17, 2010
S.M.A.R.T.tells me my primary fedora drive has lots of bad blocks,so I ordered a used identical drive from ebay.I want to do the very basic process of making a full backup of my existing drive - so as to replace it with a more or less identical replacement. Logically identical - not necewsarily sector to sector identical.im not literate in unix and its children - and seem to find a plethora of descriptinos of how to do what I want to do. which is
1. format the drive - what you may call low level format - ie op sys independent.
2. create a partition system compatible with my existing disk.
3. copy everything from my existing disk to the new disk.
4. put existing disk on the shelf as a backup and start to use new disk.
View 2 Replies
View Related
Sep 3, 2010
when we use the df command it list the disk usage list for all mounted files ..
#df -h
/dev/sda4 47G 34G 11G 78% /
varrun 1009M 120K 1009M 1% /var/run
[code]....
View 1 Replies
View Related
May 31, 2010
I have created a linux machine in virtual box now i want to add some hard disk space into it.
How would i do this. code...
View 11 Replies
View Related
May 22, 2010
Information on the net seems very sparse or outdated for how to go about booting to a RAM disk. I need to be be able to boot a PC without a hard drive in it. I want to be able to PXE boot a PC and supply it with a RAM disk image that also contains the contents of the root file system (obviously stripped down enough to keep the file size small and the boot up time fast).What I have gathered so far is that I need to extract the contents of the initrd.img file, add files as necessary, and repackage the initrd.img file. What I get confused on is how to configure the kernel line parameters to tell it to boot to RAM and not the hard drive and how to go about modifying the init script in the initrd.img to not switch to the hard drive for the root file system. I can't find anything on the net that describes concrete steps on how to go about accomplishing all of this. I'm aware of the existence of Live CD's, but I need to be able to boot the PC without relying on a hard drive, CD, or any other external media. It needs to get all of its contents from the PXE boot server and boot to RAM only. I have the PXE boot side configured successfully. Also, putting the root file system on a NFS share is also out of the question.
View 8 Replies
View Related
Oct 11, 2010
I wonder if I can backup files from an ext partition to a ntfs partition and keeping all kind of metadata and file infos?!
With other words:
Can I backup a full linux system from a ext file system to a external ntfs partitioned disk using rsync -a (keeping all file permissions)?
Is something getting lost of a file (like permissions or anything... flags...) when copied / rsynced from ext to ntfs?
The thing is, that when I restore the stuff back from ntfs to ext, can I still use my system properly?
And can I backup files like photos from ext to ntfs without loosing any meta data?
Or asked more in general: What is the difference of a file on a ext partition compared to the same file on a ntfs partition?
View 3 Replies
View Related
Feb 28, 2010
I have been running Ubuntu as my sole OS for about a month now, and aside from Computer Janitor, I have found no drive/fs cleaning tools, or defragging tools. I know this isn't Windoze, but surely there must be a way of maintaining your hard disk. I mean installs/uninstalls must leave detritus, and file moving must cause SOME fragmentation. Are there any apps, systems or methods in place that provide this functionality?
View 3 Replies
View Related
Aug 12, 2010
I have doubts regarding storage:
How to configure the Events of Storage Processor?
What are performance issues will come daily in a critical production server?
What are first steps for disk performance Check?
What are first steps for Storage Processor performance Check?
What are first steps for MetaLUN performance Check?
View 2 Replies
View Related
Nov 8, 2009
I m facing a problem while try to upgrade the initial ram disk.
I got the following error:
View 2 Replies
View Related
Aug 23, 2009
I've burned about a dozen disks and they all tell me disk error I really wanna run a dual boot and I used this to partition my hard drive with this EASEUS Partition Master 4.0 Home Edition and burned the disk with this InfraRecorder and then went to reboot and press F11 for boot order.I can see the boot screen and thats when it says disk error.
View 2 Replies
View Related
