Ubuntu Servers :: How To Connect Local Network
Jun 14, 2010
I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies
ADVERTISEMENT
Mar 4, 2011
I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies
View Related
Jan 29, 2011
Yhe only ptoblem was that he had forgotten the password to his network. This was really anoying and has happened before sp yesterday i decided to install some kind of WEP cracking tool so that it would not happen anymore.. After using sometime without getting anything to work i found this tutorial: [URL]
and started following it. i only got to the point where he has updated his computer using update manager and is about to patch his wificard. Then i noticed that the network manager for gnome was gone and the virtualbox logo in my top panel was changed to a red circle with a line running through it. I have tried to download network manager from another computer and installing it on my laptop but it needs internet to install. Then i tried to connect to my local network using terminal that did't work either i also tried connecting using a cable but had no luck connecting. The command iwconfig gives me:
[Code]....
View 4 Replies
View Related
Feb 9, 2010
i have been havin a little trouble with my ftp server im using proftpd and have been able to connect to the box on local lan but it stops with an error about tls packet.
i have been following a guide on settin up my server [URL]...and have attached my config and error details
View 1 Replies
View Related
Mar 25, 2010
up until about four days ago connecting to the local LAN was as simple as booting Ubuntu, and letting nm-applet automatically connect on Auto Eth0 But the other day it just randomly stopped working, with no cause that I can think of. I can still connect to the internet (This is via a PPPOE connection, running through the same wired interface) so it can't be a hardware problem with the ethernet port/cables themselves. nm-applet just stays spinning in circles, and nothing ever happens. I tried deleting the auto Eth0 entry, and creating another LAN entry with exactly the same settings, but I still get the same problems. way to completely restore nm-applet settings? Or some other way to give me access to the local network?
View 3 Replies
View Related
Sep 15, 2009
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
View 2 Replies
View Related
Oct 23, 2010
I bought a new desktop Lenovo and got problem: I can`t to connect to my local network
Some output:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
[code]...
I tried ifconfig eth0 up, but nothing...
View 1 Replies
View Related
Dec 24, 2010
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies
View Related
Jun 6, 2011
I have been trying to remotely access another computer (which is outside my local network) with ssh and have not succeeded. I've done everything I've seen nothing to suggest and as I opened port 22 on both computers, I have ssh configured so as to allow access from any computer (with password) and tried to log in using the external IP (the encounter with these online pages of "what is my ip"), I have a firewall turned off, the pc from which I agree is Fedora 14 that I want to access MacOS 10.5.8.
I need this because I'm running a very heavy program at the university that I can not run on my personal laptop, but do not want to have to go every day to college for this.
View 1 Replies
View Related
May 3, 2010
I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies
View Related
Sep 6, 2010
I am trying to connect to a nfs server on my local network ( the server is a fedora 12 box ) using slackware 13.1 but I am having some problems. First of all I am sure that the server is configured ok and my desktop can ping the server but when I try :
mount -t nfs 10.0.0.1:/home/usr/file /home/usr/tmp I get the following error : mount.nfs: No route to host
And when I try to rpcinfo -p 10.0.0.1 I get the error :
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
View 5 Replies
View Related
Jul 16, 2011
I have installed ubuntu 11.04 recently.. how can i connect ubuntu with other windows users in a local network...
View 1 Replies
View Related
Apr 2, 2011
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I've had this problem to the point where I thought I messed up my actual configuration so bad that I reinstalled Ubuntu to get rid of all the MySQL configuration; I ran MySQL through Windows with a breeze, but I'm getting some errors like that after restarting my computer just a few minutes ago and I have not changed anything in my SQL settings. I'm on Ubuntu 10.10 64 bit and running MySQL 5.1. the actual error that I get from Navicat and from the website is at [URL]... Update: 20110402. Connection for controluser as defined in your configuration failed. Just got that when I tried to log in to phpmyadmin.
View 4 Replies
View Related
Jun 27, 2011
Problem:Your company network has internal only hosts / websites with names that end in .local, e.g.Your freshly installed Ubuntu machine works fine on the network, has internet access, etc. but cannot connect to these particular systems.Testing DNS with tools like dig / nslookup works fine, but normal name resolution with ping / telnet / browsers does not work.Solution:1. Open a terminal window2. Enter the command sudo nano /etc/nsswitch.conf3. Change the following line:hosts: files mdns4_minimal [notfound=RETURN] dns mdns4to this:hosts: files dns4. Press Ctrl-X, Y, Enter to saveExplanation:Ubuntu ships configured to do name lookups for self-configuring networks, based on the AppleTalk / mDNS / Bonjour protocol. In the configuration shipped for the resolver, this protocol is considered the final aurhority for the ".local" top level domain, and DNS will not be checked. The above configuration change eliminates this and restricts lookups to (a) /etc/hosts file, followed by (b) DNS
View 1 Replies
View Related
Apr 30, 2010
I've followed several guides and am trying to get NFS working on my local network. For starters, I think I should be able to NFS mount a drive on the server (192.168.1.65) TO the server. From there I'll work with another client (currently 192.168.1.80)
Code:
$cat /etc/exports
/media 192.168.1.0/24(rw,no_subtree_check)
$cat /etc/hosts.deny
portmap mountd nfsd statd lockd rquotad : ALL
[Code]...
The guides I've read seem simple, so I must be missing something easy. Can't figure it out, so I'm looking for help after googling for 2 hours.
View 9 Replies
View Related
Jun 13, 2010
Machine 1:Windows vista, using vireless, 1Gb netcard.
Machine 2:Ubuntu commandline server directly connected to router, 1Gb netcard.
Router is only a 1Gb router./etc/network/interfaces look like this:
[Code]...
View 4 Replies
View Related
Jul 2, 2010
I jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.
View 4 Replies
View Related
Aug 16, 2010
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
View 9 Replies
View Related
Jun 8, 2011
I've been researching this all day with no luck thus far. Basically I need to cutoff port 21/ftp access from IP addresses outside of my local network. My local IP range is something like 192.168.0.100 - 192.168.0.150 -- so anything outside of this range would automatically be blocked.
Any IP address outside of this range would be denied as I use SFTP for remote access, etc. from home, etc.
I've researched IP tables, tcp wrappers, etc. but am still unsure which would be best for what is probably a simple fix.
Relevant info: Vsftpd via Ubuntu Server 10.10
View 9 Replies
View Related
Jun 14, 2011
I am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....
View 1 Replies
View Related
Jun 3, 2010
My router is a DHCP Server.My Access Point is a DHCP Server.I'm wondering if it is really necessary and usefull.Is it possible to get an IP from the Router through the Access Point.For exemple I connect my laptop to the wifi Access Point and the IP is given by the router only.
View 2 Replies
View Related
Jun 29, 2010
i have php5 and mysql on ubuntu server which is hosting a WordPress blog. i activated it remotely over the internet and it works fine still over the internet. now im home and using my local network again and now when i try to go into it with its local IP, it just shows some text (blog title, posts and so on) with NO pictures.
View 2 Replies
View Related
Aug 15, 2010
I'm trying to setup a NAS for my network, the only problem is that I can't figure out how to do it. On my network I have about 3 computers however only I only use 2 of them so I thought that maybe I could use the third computer in such a way that I could access it 24/7 from the internet as a server for all of my files (school papers, music etc etc...). The only problem is that I don't know where to get started. Both of the computers I'm currently using are Windows and the one that I,hopefully, can turn into a server is running on Ubuntu.
View 4 Replies
View Related
Aug 22, 2011
I have public IP and registered domain mydomain.eu. On domain provider DNS servers, mydomain.eu points to my machine called solis (10.10.10.1; this is gateway, dhcp and dns server; eth0 is outsite, eth1 inside my network). I have also laptop which is connected to eth1 through wireless AP. From laptop and solis I have access to outside and inside network without problems. Of course my dream is to have access to solis from local network using name 'mydomain.eu' but not fully name 'solis.mydomain.eu'.
View 5 Replies
View Related
Feb 18, 2011
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
View 4 Replies
View Related
Jan 6, 2009
I've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message:
Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80
I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.
I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.
Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?
View 5 Replies
View Related
May 23, 2010
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
View 10 Replies
View Related
Apr 13, 2011
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
View 3 Replies
View Related
Jun 28, 2009
I have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan
View 3 Replies
View Related
Dec 16, 2010
Problem with my Internet connection. I can't connect to the update servers. I don't know why. It's a brand new installation, not a week old yet. I can't install the support for restricted media for example. The servers won't refresh in YaST. It tells me it can't download the repomd.xml.asc.
The other problem is that some servers on the web won't load for me either.
For example, I get most of my local news from The Toronto Star, and I can't connect to it's website at all.
I can from Windows (I dual boot) but not SUSE. I don't think its a problem limited to that one website either. I am able to connect to most websites though.
This is the result of zypper repos -d
Code:
View 9 Replies
View Related
