Debian Configuration :: Network - Cannot Connect To Any Other Websites And Apt Will Not Connect To Any Servers
Feb 18, 2011
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
View 4 Replies
ADVERTISEMENT
Apr 9, 2011
I installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies
View Related
Aug 21, 2015
I installed a fresh Debian Desktop without the LAN cable connected. After that I got message when I put the cable in:
Code: Select allNetwork Interface
Connection New Wired Connection failed
I have tried to re-install everything once again with the cable in, but during the Debian installation there was no network detected.
However, I proceeded and re-installed Debian. But the problem persists. It continues to re-connect and than disconnect. There is a symbol showing re-connection. The network eth0 is visible to the machine.
I booted Mint Live disc and the same happens there.
View 14 Replies
View Related
Dec 24, 2010
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies
View Related
Aug 31, 2011
I have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.
View 6 Replies
View Related
Jun 3, 2010
I never been able to connect to some websites with DEBIAN, but with same computer different LINUX and Windows, As an example Monash University in Australia is one of them.
View 4 Replies
View Related
Jul 23, 2015
Since a recent update on Stretch, I have been unable to use the network-manager to connect to my home wireless network on my laptop. It was working fine before. I did not change any settings on the WLAN router. I can still connect to other wireless networks at work and university, just not this particular one at home. All other non-Debian devices in my household are still able to connect just fine.While figuring this out, I have tried connecting manualy with ifup but I don't really know how that works. Right now there is only the loopback entry in /etc/network/interfaces.
Below is the output of syslog, when gnomes network-manager is trying to connect, but fails.
Code: Select allJul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: starting connection 'Affenbande'
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) started...
[code]...
View 14 Replies
View Related
Apr 17, 2016
Recently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
View 1 Replies
View Related
Apr 20, 2010
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies
View Related
Apr 10, 2011
I can't seem to get this to work without having to physically create connections as root. The "Available to all users" in the nm settings box remains uncheckable, despite completing the following tasks:
Ensuring NetworkManager.conf contains
[main]
plugins=keyfile
[code]...
View 3 Replies
View Related
May 5, 2011
I would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
View 2 Replies
View Related
May 20, 2011
I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.
The output of iwconfig is
wlan0 IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9
[code]...
View 5 Replies
View Related
Jun 27, 2011
Problem:Your company network has internal only hosts / websites with names that end in .local, e.g.Your freshly installed Ubuntu machine works fine on the network, has internet access, etc. but cannot connect to these particular systems.Testing DNS with tools like dig / nslookup works fine, but normal name resolution with ping / telnet / browsers does not work.Solution:1. Open a terminal window2. Enter the command sudo nano /etc/nsswitch.conf3. Change the following line:hosts: files mdns4_minimal [notfound=RETURN] dns mdns4to this:hosts: files dns4. Press Ctrl-X, Y, Enter to saveExplanation:Ubuntu ships configured to do name lookups for self-configuring networks, based on the AppleTalk / mDNS / Bonjour protocol. In the configuration shipped for the resolver, this protocol is considered the final aurhority for the ".local" top level domain, and DNS will not be checked. The above configuration change eliminates this and restricts lookups to (a) /etc/hosts file, followed by (b) DNS
View 1 Replies
View Related
Jul 26, 2011
I'm attempting to use a network bridge to connect my virtual machine, like so:
[Code]...
The issue is that when I type the following command, I get the further following horrible error message that doesn't seem to really point me to anywhere and I can't seem to find any relevant information to my problem on the web:
root@darkstacks:~# qemu-system-i386 -hda test.img -m 128 -curses -net nic -net tap,ifname=tap0 warning: could not configure /dev/net/tun: no virtual network emulation
Does anyone have any idea what I need to do here? My processor does not have the vmx flag, as it's a 2.4GHz P4. I don't know if that might have something to do with it.
View 3 Replies
View Related
Dec 4, 2015
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
View 3 Replies
View Related
Apr 17, 2011
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
View 7 Replies
View Related
Jun 15, 2010
When I go out of town I normally take my Acer Netbook to travel light. I ran into a problem over the weekend which I have seen before and couldn't find the cause. I used the wifi at the house I was staying at and could connect to the router via Wicd and ping outside IP addresses, however, I could not connect to any websites with Iceweasel or Midori. I receive the generic error that the browser is unable to connect. Now that I am back at my house I cannot repeat the problem, but have found a couple threads about disabling ipv6 protocol. The symptoms sound like a browser setting, but I couldn't find any settings that looked unusual.
View 2 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
Dec 16, 2010
Problem with my Internet connection. I can't connect to the update servers. I don't know why. It's a brand new installation, not a week old yet. I can't install the support for restricted media for example. The servers won't refresh in YaST. It tells me it can't download the repomd.xml.asc.
The other problem is that some servers on the web won't load for me either.
For example, I get most of my local news from The Toronto Star, and I can't connect to it's website at all.
I can from Windows (I dual boot) but not SUSE. I don't think its a problem limited to that one website either. I am able to connect to most websites though.
This is the result of zypper repos -d
Code:
View 9 Replies
View Related
May 29, 2010
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
View 4 Replies
View Related
Apr 26, 2011
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
View 4 Replies
View Related
Feb 15, 2009
I want to run snort through a web application with exec("snort -v -i eth0 ") php function.for example when start button was pressed snort should be run,but the execution failed with this error:but when I run snort command via command line as root it will execute successfully.I think this problem is for that apache user haven't access to network adapter, is my guess correct? I have no experience with apache, should I change apache configuration? what is the configuration for this problem.I think I should find a way to allow apache to access but I don't know how?
View 2 Replies
View Related
Aug 8, 2011
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies
View Related
Jun 8, 2011
Is there a way to access today the openSUSE servers via IPv4? My ISP does not support ipv6, nor my router, and I can't install software right now in openSUSE, because it wants to access te servers via IPv6.
If would be grat to have the download.opensuse.org ipv4 address.
I really need to install some packages, they are required for my school project.
View 9 Replies
View Related
Jun 14, 2010
I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies
View Related
Jun 24, 2010
Does anyone know, or have any experience with, what the best way to set a network interface on a linux server to be up - so that virtual machines can bridge through the physical interface, but not allow anyone on a network to connect to the server itself? Thank you
View 1 Replies
View Related
Aug 10, 2010
I recently installed Ubuntu 10.4 on my laptop, realtek 8712 wireless chipset. I can connect to the internet, but websites don't load.
View 9 Replies
View Related
Jan 7, 2014
I did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
 auto lo
 iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
View 14 Replies
View Related
Jan 8, 2011
I have been using another OS but thought for Ham Radio Debian might be good however my stupidity took over right at the start.Have a live cd and works fine but I don't know how to connect to the Internet.Using DSL.
View 9 Replies
View Related
Mar 13, 2011
I need to connect to a serial port server via /dev/tty.. . The serial port IP addresses are the server's IP address with a particular port # (10001, 10002 etc). The way this seems to work is to create a pseudo-tty and somehow link or configure it to point to the serial server's IP/port #'s.
View 3 Replies
View Related
