Ubuntu Servers :: 10.4 Needs Connected To Local Network And Internet?
Jul 2, 2010I jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.
View 4 Replies
ADVERTISEMENT
Ubuntu Servers :: Accessing Blog On Local Network And Internet?
Jun 29, 2010i have php5 and mysql on ubuntu server which is hosting a WordPress blog. i activated it remotely over the internet and it works fine still over the internet. now im home and using my local network again and now when i try to go into it with its local IP, it just shows some text (blog title, posts and so on) with NO pictures.
View 2 Replies View RelatedOpenSUSE Network :: Connected To Internet And Also Connected Pcs Might Want To Use Internet?
Aug 21, 2010I want to set a up a network of inter connected pcs, for example on pc A linux is installed.now pcs B, C , D, etc should connect to A and do there work, for example A want to do C/C++, development, whereas B wants to do some PERL development or whatever, this is just an example, 2 different pc users might do same work also, and the connecting pcs may have Windows or linux or bsd.OSes now what h/w or s/w is required and what steps are required to set up this network, main pc would be connected to internet and also connected pcs might want to use internet also..have installed opensuse edulife , and use this as PC A for testing.. and I use bridged dsl Broadband connection to connect to internet , by the username and password provided by the ISP, in windows its easy to setup this connection, however not able to do on linux,
View 9 Replies View RelatedUbuntu :: Print On A Toshiba 2820c Which Is Connected To The Local Network?
Jan 12, 2010I just came up with Linux/Xubuntu so I hope you I hope you'll excuse my "noobishness". I've Xubuntu 9.04 running on a laptop along with cups 1.3.9. I'd like to print on a toshiba 2820c which is connected to the local network. I tried to install it via localhost:631 what seemed to be working quite well since the toshiba is automatically detected and the driver (according to the printers manuel it's the same as for the 4520c) is already included. So I finish the installation and whenever I try to print something I am told that the job is sent and done but the printer doesn't even realise, that there was somebody trying to print something, at least there is nothing in the logs. I also tried to use the ppd-file from the toshiba-support but it failed again.
View 5 Replies View RelatedUbuntu :: Connected To Wireless Network But No Internet?
Mar 2, 2010I have a compaq cq40-133tu laptop. I have windows vista ultimate and ubuntu 9.10 parallely installed. Most of the time i use Ubuntu for programming purpose. But for internet connection i have to go to windows. This is because ubuntu is getting connected to the network but is unable to access internet, whereas the windows can. I want to totally abandon windows. Recently i got internet connection in ubuntu for just 15 minutes or so when i ticked the option AVAILABLE TO ALL USERS. but after that the same story continues and iam not able to access internet. Details about Internet connection: This is not my connection, these signals come from nearby building. Its a wifi open public network.
View 9 Replies View RelatedUbuntu Networking :: Connected To Network But No Internet / Get That?
Feb 24, 2011On the 25th of January, one of my computers randomly stopped being able to connect to the Internet. It was running a dual boot (Ubuntu 10.04.1 LTS & Windows XP SP2), and is connected to the network via an ethernet cable (no wireless). According to the Network Manager, everything is working okay (there was no change from when I was able to access the Internet).
When I would use Firefox, I would get the message "Waiting for (page)...". However, this is not a Firefox only problem, as every program requiring Internet access (e.g. Evolution) is unable to connect to the Internet.
I compared the Internet settings to those of my father's Windows XP SP1 computer, which is able to connect to the Internet. There was no difference, except for the IP Address and Hardware Address. Because of this, I incorrectly deduced that either the actual Ethernet cable or the wall plug was faulty. I tried using a different cable and connecting to the Ethernet wall plug used by the aforementioned computer. Nothing changed. I was still unable to connect.
I didn't worry about it until Tuesday, when my other computer had exactly the same problem. It is running a triple boot between Ubuntu 10.04.1 LTS, Ubuntu 9.04 and Windows XP SP2, and I am unable to obtain Internet access using any partition. As with the previous case, my computer showed no change in the Internet settings, and the computer also shows it as being connected to the network. It is also connected via an Ethernet cable.
Ubuntu Networking :: 10.10 Connected To Network But No Internet
Mar 13, 2011I have a Toshiba Satellite L505D-GS6000, and I installed Ubuntu before and it worked flawlessly until I decided that I had to go back to Win7 because of certain program compatibility issues.I'm back here trying to set it up and am having no issues except for with my wireless. I can see all of the SSID's, I am able to connect to my wireless, and it displays that I have been assigned an IP and all of the other settings given by DHCP.
I have been trying to fix this for hours, googled, searched these forums, and have spent time with some people on the Ubuntu IRC channel and we are unable to come up with a fix.
Print out of sudo lshw -C network:
Quote:
*-network
description: Wireless interface
product: RTL8191SEvB Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.
[code]....
The strange thing is that although nothing will load when I try to visit facebook.com, google.com, or any other website... I opened the update manager and I noticed that it would download for 30ish seconds, stop and do nothing for 60ish seconds, resume for another 30, stop, resume, etc. until it finished. I am able to ping my router, and 8.8.8.8, but I am unable to ping [URL].
Ubuntu Servers :: Apache2: Localhost Responds Only When Connected To Internet?
May 12, 2010I am on Ubuntu 10.04 LTS. Installed LAMP yesterday using:
Code:
sudo tasksel install lamp-server
Tested Apache, PHP, MySQL then, all worked fine.
[code]....
Ubuntu Networking :: 10.10: Connected To My Wireless Network, But No Internet?
Nov 9, 2010I upgraded to 10.10 the day it came out, and haven't had any problems with internet stuff. My wireless card works without any proprietary drivers. Last night, the computer stopped connecting to the internet. I am still connected to my wifi network, but I can't do anything online. I had assumed that my internet connection was just down in general, and tried resetting the computer, shutting down the computer and then turning it on again, and rebooting the modem, but then my Xbox connected, and my laptop running 10.04 connected, so I'm confused as to what is going in. Any ideas?
View 2 Replies View RelatedOpenSUSE Network :: Vodafone - Connected But No Internet?
Aug 17, 2010I'm using SuSE 11.3. I have installed this betavine stuff with which I can use my Vodafone mobile connect usb device. (vodafone-mobile-connect-2.10.01-1.noarch.rpm + dependencies.) I was able to get it to run, it can connect, I can even send text messages (SMS) with it.
However, if I try to use the internet, the system behaves as it wasn't connected to it at all. ping doesn't see anything, neither does firefox etc. I have turned off all proxy and firewall settings.
I suppose I should tell Linux to use this connection for the internet, but how? Do I have to configure something with NetworkManager?
Ubuntu Servers :: DHCP Connection Sharing - Connected To The Internet Via Wireless?
Dec 29, 2010I did search, but could not find a solution.Right I've installed Ubuntu Server 10.10 on an old machine, installed fine and the system is running. I have a windows 7 desktop that is connected to the internet via wireless. The desktop then has an ethernet connection which is shared to the ubuntu server. The network looks like this.
Modem > Router > Desktop > Switch > Ubuntu Server My problem here is that there appears to be no connection from the server to the desktop. The server cannot connect to the internet.
When i ifconfig the ubuntu machine shows.eth0 link encap:Ethernetinet address: 192.168.137.2 Bcast:192.168.137.255 Mask 255.255.255.0 However on the windows desktop (the machine sharing the internet) these are the details for the connection to ubuntu server.ip 169.254.170.50 mask 255.255.255.0
is this a dhcp problem? is my server configured wrong?
Ubuntu Networking :: Wired Network Connected, But No Internet Access?
Mar 24, 2010Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
Networking :: Routing To Internet Through One Network And To Local Ips In Another Network?
Mar 31, 2009I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.
Here's the setup..
Wired:
192.168.1.0/24 Gateway = 192.168.1.1
Route internet through here
Wireless
192.168.2.0/24 Gateway = 192.168.2.1
If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)
Code:
$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4
[code]....
With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.
Debian Configuration :: Network Manager Says No Internet Is Connected
May 16, 2011I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?
View 1 Replies View RelatedFedora Networking :: Wireless Connected To Network But No Internet.
Sep 7, 2011I just installed a dualboot win7/F15 on my laptop (dell XPS 15) and everything seems to be working fine except that when I connect to my network it is connected and the network is accessible (I can visit my gateway/ router) but when I try to visit a website it simply never ends loading it.Internet is working on win7 so it isn't my network's fault.Now I found somewhere that updating could help but since I dont have internet I can't update
View 3 Replies View RelatedNetworking :: OpenWRT Is Connected To Internet But Network Clients Can't?
Nov 20, 2010got an asus wl500gp v2 and i just had to reflash it. Flashing went through fine, but while setting up the PPPoE connection I got stuck. Here is what the configuration looks like:ADSL Modem ---Ethernet--- Router ---Ethernet--- Laptop I set up OpenWRT to connect over PPPoE over the WAN port and the connection is established:
PAP authentication succeeded
peer from calling number XX:XX:XX:XX authorized
replacing old default route to br-lan
[code].....
Networking :: Connected To Wireless Network But No Internet Access?
Sep 17, 2009if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.
View 1 Replies View RelatedUbuntu Networking :: (fluxbuntu) Network Remains Connected; Internet Connection Sometimes Not Available?
Apr 10, 2010I'm running Ubuntu 9.10 with fluxbox installed. Occasionally my internet connection will stop working, but when I check on wifi radar, I'm still connected to the network. The router is not plugged into a computer at the moment, just the cable jack. It is likely a hardware problem however, since my other laptops also experience disconnects. Any help beyond "change the cable" would be greatly appreciated. For instance, even though I am connected to the network, I cannot post at the moment due to lack of internet connection.
View 1 Replies View RelatedUbuntu Networking :: Connected To Network Via Live Cd (10.10) - Unable To Access Internet
Apr 26, 2011can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies View RelatedFedora Servers :: PC Connected To Network / But Can't See Other PCs Or Mac
Jan 11, 2011I just loaded F14 and want to use it as a file server. Not even certain where to get started. PC connected to the network, but can't see other PCs or Mac. thoughts?
View 7 Replies View RelatedOpenSUSE Network :: DNS Settings And The Internet Connected, But Without The .exe Program It Just Disconnects After 10 Minutes?
Sep 13, 2010i just installed open suse 11.3 after using linux mint 7(based on ubuntu 9.04).i am currently using two internet connections at home, the first is a vodafone mobile modem, which is workind excellent, and the other is a LAN network, that on windows uses a *.exe program to run. i managed to make all the IP, NETMASK, DNS settings and the internet connected, but without the .exe program it just disconnects after 10 minutes.this is the same thing that happens with the connections on windows if i start the computer and not run the "net.exe" program, but if that program is running the internet connections works just fine. i tried using wine to run net.exe, but it just gives an error message.
View 5 Replies View RelatedUbuntu Networking :: Wired + Wireless Connected But Natty Picks Wrong Network For Internet
May 15, 2011I have a wireless network (192.168.1.0) that's bridged to the Internet and a wired one (192.168.0.0) that's only local. When I am connected to both networks, Natty wants to route my Internet traffic through the wired, local-only one.
Can I make it automatically "just work", so that the right network is chosen for Internet traffic? Otherwise, what's the workaround?
Fedora Networking :: No Internet Connection Although Network Manager And Icon On Upper Bar Says Connected
Jun 22, 2011I recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.
View 6 Replies View RelatedNetworking :: Unable To Browse The Internet Although The Network Icon Shows The Computer Is Connected?
Jan 31, 2010I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
Networking :: Can Connect To Internet But Not Local Network?
May 3, 2010I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies View RelatedNetworking :: Access Local Ip From Outside Network(internet)?
Mar 22, 2011I have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.
View 11 Replies View RelatedSecurity :: IPtables Limit SSH From Local Network To Internet
Feb 24, 2010I have a linux firewall. I want to limit a ssh connection number from local network to internet .
Example :
Internal pc (192.168.0.10) start a ssh scan to the external (internet) host.
I want that iptables limit that host (192.168.0.10) and block ssh connection from this host at 3 attempt.
Ubuntu Servers :: Get NFS Working On Local Network?
Apr 30, 2010I've followed several guides and am trying to get NFS working on my local network. For starters, I think I should be able to NFS mount a drive on the server (192.168.1.65) TO the server. From there I'll work with another client (currently 192.168.1.80)
Code:
$cat /etc/exports
/media 192.168.1.0/24(rw,no_subtree_check)
$cat /etc/hosts.deny
portmap mountd nfsd statd lockd rquotad : ALL
[Code]...
The guides I've read seem simple, so I must be missing something easy. Can't figure it out, so I'm looking for help after googling for 2 hours.
Ubuntu Servers :: Local Network Very Slow?
Jun 13, 2010Machine 1:Windows vista, using vireless, 1Gb netcard.
Machine 2:Ubuntu commandline server directly connected to router, 1Gb netcard.
Router is only a 1Gb router./etc/network/interfaces look like this:
[Code]...
Ubuntu Servers :: How To Connect Local Network
Jun 14, 2010I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies View Related