Ubuntu :: Network Manager Is Gone - Connect To Local Network Using Terminal
Jan 29, 2011
Yhe only ptoblem was that he had forgotten the password to his network. This was really anoying and has happened before sp yesterday i decided to install some kind of WEP cracking tool so that it would not happen anymore.. After using sometime without getting anything to work i found this tutorial: [URL]
and started following it. i only got to the point where he has updated his computer using update manager and is about to patch his wificard. Then i noticed that the network manager for gnome was gone and the virtualbox logo in my top panel was changed to a red circle with a line running through it. I have tried to download network manager from another computer and installing it on my laptop but it needs internet to install. Then i tried to connect to my local network using terminal that did't work either i also tried connecting using a cable but had no luck connecting. The command iwconfig gives me:
[Code]....
View 4 Replies
ADVERTISEMENT
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
Apr 15, 2010
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies
View Related
Jan 10, 2010
the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
View 5 Replies
View Related
Mar 25, 2010
up until about four days ago connecting to the local LAN was as simple as booting Ubuntu, and letting nm-applet automatically connect on Auto Eth0 But the other day it just randomly stopped working, with no cause that I can think of. I can still connect to the internet (This is via a PPPOE connection, running through the same wired interface) so it can't be a hardware problem with the ethernet port/cables themselves. nm-applet just stays spinning in circles, and nothing ever happens. I tried deleting the auto Eth0 entry, and creating another LAN entry with exactly the same settings, but I still get the same problems. way to completely restore nm-applet settings? Or some other way to give me access to the local network?
View 3 Replies
View Related
Jun 14, 2010
I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies
View Related
Oct 23, 2010
I bought a new desktop Lenovo and got problem: I can`t to connect to my local network
Some output:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
[code]...
I tried ifconfig eth0 up, but nothing...
View 1 Replies
View Related
Dec 24, 2010
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies
View Related
Jun 6, 2011
I have been trying to remotely access another computer (which is outside my local network) with ssh and have not succeeded. I've done everything I've seen nothing to suggest and as I opened port 22 on both computers, I have ssh configured so as to allow access from any computer (with password) and tried to log in using the external IP (the encounter with these online pages of "what is my ip"), I have a firewall turned off, the pc from which I agree is Fedora 14 that I want to access MacOS 10.5.8.
I need this because I'm running a very heavy program at the university that I can not run on my personal laptop, but do not want to have to go every day to college for this.
View 1 Replies
View Related
May 3, 2010
I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies
View Related
Sep 6, 2010
I am trying to connect to a nfs server on my local network ( the server is a fedora 12 box ) using slackware 13.1 but I am having some problems. First of all I am sure that the server is configured ok and my desktop can ping the server but when I try :
mount -t nfs 10.0.0.1:/home/usr/file /home/usr/tmp I get the following error : mount.nfs: No route to host
And when I try to rpcinfo -p 10.0.0.1 I get the error :
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
View 5 Replies
View Related
Mar 4, 2011
I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies
View Related
Jul 16, 2011
I have installed ubuntu 11.04 recently.. how can i connect ubuntu with other windows users in a local network...
View 1 Replies
View Related
Mar 2, 2010
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies
View Related
Jun 27, 2011
Problem:Your company network has internal only hosts / websites with names that end in .local, e.g.Your freshly installed Ubuntu machine works fine on the network, has internet access, etc. but cannot connect to these particular systems.Testing DNS with tools like dig / nslookup works fine, but normal name resolution with ping / telnet / browsers does not work.Solution:1. Open a terminal window2. Enter the command sudo nano /etc/nsswitch.conf3. Change the following line:hosts: files mdns4_minimal [notfound=RETURN] dns mdns4to this:hosts: files dns4. Press Ctrl-X, Y, Enter to saveExplanation:Ubuntu ships configured to do name lookups for self-configuring networks, based on the AppleTalk / mDNS / Bonjour protocol. In the configuration shipped for the resolver, this protocol is considered the final aurhority for the ".local" top level domain, and DNS will not be checked. The above configuration change eliminates this and restricts lookups to (a) /etc/hosts file, followed by (b) DNS
View 1 Replies
View Related
Oct 5, 2010
This has happened a few months ago, but just haven't gotten around to fixing it yet. But with 10.10 coming up soon, I would like to get it fixed so it can update. I am currently using my Vista partition, which can connect to the network just fine. But ubuntu, no matter what (unplug/replug router, modem, router&modem, etc) will not connect. Is there a way to reinstall network manager from a CD or SD card? Whenever I try to sudo ap get it, it will error out since it can't pull it from the default (internet) source.
View 2 Replies
View Related
Mar 20, 2010
I'm running Ubuntu Karmic Server with Xfce desktop, the problem is the network manager, it says it is disconnected, even though I am connected to my network and getting an internet connection. It wouldn't normally bother me, but I'm trying to setup a VPN using the network-manager-openvpn plugin. I put in the required details for the VPN connection, but as soon as I tick the "apply to all users" box, the information is lost. The information will remain if I don't tick that box, but it will not connect. when I try to select the VPN connection I just setup, nothing happens.
I've tried the exact same configuration on another desktop, running Ubuntu Karmic with Gnome desktop, the network manager works fine, my ethernet connection is showing as connected, and I can connect to the VPN no problem, the problem lies with the network manager in Xfce. Is there anyway I can get it to show as connected? it wont allow me to connect to the VPN otherwise, it's silly, because that adapter has a full working network connection.
View 9 Replies
View Related
Jul 23, 2010
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
View 9 Replies
View Related
Dec 26, 2010
i was fed up after i can't connect to wifi using ubuntu. the problem happened after my router is being replaced to a new one because the old one got struck by lightning. good thing i dual-boot my laptop so i can access the internet using Windows 7 now.
i use the default network manager to connect to wifi before, but it all seem to be failed after the replacement of router. i also used Wicd but it failed to connect either. it says in the notification "disconnected: bad password" but the password was right. my wifi used WEP password with open authentication.
i even remove the WEP password and try to connect, but it failed. all i can do is to boot in windows 7 and surf internet there. what could cause this problem? is it the router, the telephone line? i can set the router settings if i want, but i don't know what causes the problem.
View 1 Replies
View Related
May 8, 2011
I installed lxde on Ubuntu 11.04 but I cannot find any network manager to connect wireless LAN. There are some sort of network manager and they show available signals to connect but cannot find any way to command computer to "connect" it.
View 1 Replies
View Related
Dec 28, 2010
I wonder how we can to connect a wireless network via terminal if we use a minimal *buntu in command line, without network manager. I've found some old threads in ubuntuforums but I still can't figure out.
View 6 Replies
View Related
Sep 28, 2010
I am using an HP laptop dv8000 series FYI. I started with a fresh install of OS11.2. The first thing I tried was to connect to a network through the gui net manager. This got me nowhere (nothing detected). I then noted that the card was not getting any signal/not functioning. My card is enabled from on the laptop.
I connected my laptop via ethernet and executed this command:
Code:
sudo /usr/sbin/install_bcm43xx_firmware
which returned no errors and seems to have completed successfully.
Using the dmesg | grep firmware command I now get the following:
Code:
SuSE-Laptop:~ # dmesg | grep firmware
[41.246079] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[41.268643] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[41.320790] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[41.369098] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[41.591065] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
SuSE-Laptop:~ #
Now the option to enable wireless in my systray (I know wrong name) has become unselectable. Now what do I do?
View 1 Replies
View Related
Oct 5, 2010
I recently installed 11.3, I was able to get my wireless working. However only using the "traditional method with ifup", I could not connect with network manager. I remembered last time I installed 11.2, it was suggested that the wired connection was taking precedence, which was the initial reason I went the traditional route. I changed the wired connection to "on cable connection" and the wireless to "boot time" but still no luck. So are both methods fine and its just a matter of preference, I would prefer to use knetwork manager.
View 2 Replies
View Related
Mar 24, 2010
I followed (or at least tried to follow) tutorials on doing this. I installed network-manager-pptp and tried to configure network manager to connect to a VPN. In the settings when I select MPPE with 128-bit encryption, after I've selected it and applied it, I check the settings and it's invariably unchecked. I tried using KVpnc after getting frustrated with network manager, and I can't seem to get that working either. I've been trying to search for info on this, and I can't seem to find anything on why I can't select MPPE with 128-bit encryption. That seems like it might be why I'm unable to connect to the VPN?
View 1 Replies
View Related
Jul 2, 2010
I have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
View 3 Replies
View Related
Jul 3, 2010
Removed Network Manager (Wicd) - Now Can't Connect To Internet
View 1 Replies
View Related
Sep 15, 2010
I have ticked the box Connect Automatically in the OpenVPN setup I configured in the gnome network manager but it doesn't connect on startup. It connects perfectly ok if I manually select the VPN but i'd like it work immediately on launch.
I have autologin on Ubuntu but since there is no VPN password to decrypt I don't see why it should be a problem.
View 2 Replies
View Related
Nov 16, 2010
Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.
View 2 Replies
View Related
