i have been havin a little trouble with my ftp server im using proftpd and have been able to connect to the box on local lan but it stops with an error about tls packet.
i have been following a guide on settin up my server [URL]...and have attached my config and error details
I'm using ProFTPd as my FTP server on a CentOS 5 box. Since updating to version 1.3.3c, I seem to have very specific problems. Connections work quite fine with about any FTP client out there, including the basic ftp command from the Linux prompt. However, when trying to connect to that server with LFTP, things go wrong. When connecting, all I get is [Connecting] then [Logging in...] and then nothing. I have to add that SSL is forced off in lftp.conf (I read it could be the problem). I sometimes get a counter for reconnection, but it never works.
The command I use in lftp is : open -u <user>,<pass> <server_ip>, the ls for lftp to establish the connection. I don't see anything at all in the server's log. I just see "FTP session opened" and "FTP session closed" in /var/log/messages" and nothing in /var/log/secure. I can give you a strace if needed. Please keep in mind that the server WORKS with anything but LFTP and NCFTP (which I also tried).
After upgrading ubuntu server to the latest version (according to apt-get) proftpd stopped working. When I try to execute proftpd I get the following message (when logged in as root or user with root privileges) :
Code:
Line 18 in modules.conf looks like this:
Code:
I've tried removing and re-installing proftpd, but this doesn't help
If I comment line 18 in modules.conf, I just get permission denied on the next LoadModule command...
Can I remove all modules? or is there a way of fixing the permission denied issue?
After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:
Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?
how to upgrade from mysql5.1 to mysql5.5 version. Pls guide me in briefly.I did upgrade with the help of this url
http://www.ovaistariq.net/490/a-step...-to-mysql-5-5/ but i got error like this error:2002: Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) when trying to connect FATAL ERROR: Upgrade failed
In /etc/my.cnf , i didnt get like this. Is this is the error
user = mysql; socket = /var/run/mysqld/mysqld.sock; port = 3306; basedir = /usr/local/mysql; datadir = /usr/local/mysql/data; tmpdir = /tmp; log_error = /var/log/mysql/error.log
I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:
Code:
root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock
[code].....
I have a proftpd server and I can connect from localhost but I can't from outside.I've scanned the port 21 and it isn't responding (maybe mi ISP doesn't allow traffic on that port), so I've changed to the port 63306 just to see what happens.e changed the /etc/proftpd/proftpd.conf to port 63306 and restarted the proftpd service.Also I've added the rule to the firewall and an entry in the router configurationNow I try to log in through browser and it just stays like trying to connect to the server but nothing happens
View 3 Replies View RelatedI am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies View RelatedI have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies View RelatedERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I've had this problem to the point where I thought I messed up my actual configuration so bad that I reinstalled Ubuntu to get rid of all the MySQL configuration; I ran MySQL through Windows with a breeze, but I'm getting some errors like that after restarting my computer just a few minutes ago and I have not changed anything in my SQL settings. I'm on Ubuntu 10.10 64 bit and running MySQL 5.1. the actual error that I get from Navicat and from the website is at [URL]... Update: 20110402. Connection for controluser as defined in your configuration failed. Just got that when I tried to log in to phpmyadmin.
View 4 Replies View RelatedIm getting this error when i try to run mysql from a shell
Code:
ERROR 2002 (HY0000): can't connect to local MySQL server through socket
I have installed MySQL over yum on fedora.
but the path and file /var/lib/mysql/mysql.sock does not exist on my system?
I've tried /etc/init.d/mysql start, and it actually starts, or at least, it doesn't error out. But when I do pgrep mysql I get nothing, and when I try to login with mysql -p as root, I get
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
None of my other logins work, either, but since pgrep mysql didn't work, it's clear that MySQL just isn't running. I tried uninstalling and reinstalling mysql-server via apt-get, but I get the same thing. The logs in /var/log/syslog show this:
Apr 11 14:31:26 /etc/init.d/mysql[9774]: #007/usr/bin/mysqladmin: connect to server at 'localhost' failed
Apr 11 14:31:26 /etc/init.d/mysql[9774]: error: 'Can't connect to local MySQL server
[code].....
I have an e-mail production server that has been running fine for almost two years.
Notice mail was not serving today and login to a bunch of errors in messages
However, I think they are all from not being able to access MySQL and when I:
mysql -u root -p
I get:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
I have dynamic internet connection. In my network one machine run glassfish server in port 8080 (it IP address 192.168.1.3). If I type http://192.168.1.3:8080/ that load my glassfish server page. What I want is using dynamic IP like http://<DynamicIP>:8080/ load my glassfish server page. How can I do it ? My router is Dlink GLB-802C > I haven't good knowledge about network.
View 3 Replies View RelatedI am trying to connect to a nfs server on my local network ( the server is a fedora 12 box ) using slackware 13.1 but I am having some problems. First of all I am sure that the server is configured ok and my desktop can ping the server but when I try :
mount -t nfs 10.0.0.1:/home/usr/file /home/usr/tmp I get the following error : mount.nfs: No route to host
And when I try to rpcinfo -p 10.0.0.1 I get the error :
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
When I type mysql,
vignesh@vignesh:~$ mysql
I get this error.
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
So, I checked whether the file mysqld.sock is there in its respective folder, but I could not find that file. How to create the file and start mysql server.
I'm pretty new to Linux and this is my first post here.
Whenever I try to connect to MySQL, I get the following message:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
It worked just fine the other day, then are I ran some updates and setup port forwarding to this computer [Ubuntu Server 10.04 LTS].
I'm using fedora 13(x86_64).i got an error message while starting the mysql database software through the kernel. Code: [pradeep@localhost ~]$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) [pradeep@localhost ~]$ this is the first time i'm using the mysql in linux environment. do i have to configure anything before using it for the first time ?!
View 5 Replies View Relatedi am new member for this forum, i am doing copy data from virtualbox A centos machine to virtualbox B centos machine.first step i use mysqldump database xxx > xxx.sqlthan send to B machine by scp xxx.sql @B machine IP /root.but come to third step, the xxx.sql need import to B machine mysql database,the error occur again:# can't connect to local mysql server through socket 'opt/lampp/lampp/mysql/mysql.socki really dun know how to solve it, use almost 3 hour cannot do solve it,but i use win scp check the folder, i found mysql.sock is no at the /opt/lampp/lampp/mysql/mysql.sock but at/opt/lampp/var/mysql/mysql.socpi dun know how to continue it, i hope those centos user help me to overcomethe issue. thank you very much!centos version 5.5, xampp version 1.4
View 3 Replies View RelatedERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
following my.cnf setting why this error is coming
#BEGIN CONFIG INFO
#DESCR: 4GB RAM, InnoDB only, ACID, few connections, heavy queries
#TYPE: SYSTEM
#END CONFIG INFO
[Code].....
I some how installed mysql-5.1.46 (I believe I have installed) When I start mysql I am getting error:
[root@501 ~]# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
Then when I restart:
[root@501 ~]# /etc/init.d/mysql restart
ERROR! MySQL manager or server PID file could not be found!
Starting MySQL. ERROR! Manager of pid-file quit without updating file.
Then I tried to safe start mysql :
[root@501 ~]# mysqld_safe
100426 21:36:49 mysqld_safe Logging to '/usr/local/mysql/data/501.training.com.err'.
100426 21:36:49 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/data
100426 21:36:49 mysqld_safe mysqld from pid file /usr/local/mysql/data/501.training.com.pid ended .....
when i tried the command mysql -u root it is giving me an error that "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)" although my mysql server is ruuning beacuse i m using XAMMP server and its inbuild mysql server is running i cannot use service mysqld start command beacuse this command try to start another instance of mysql and i required mysql of XAMMP.
View 3 Replies View RelatedDuring the boot of CentOs I see this message which never stops scrolling during all the boot :
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'
Heres my situation. I have around 30+ systems running Karmic and more coming online everyday. I'd like to be able to have these updated via the local network to conserve net bandwidth. Is it possible to setup a single system which will download updates I specify, then make them available to the other systems on my network via some kind of local repo?
Of course I'm not looking to download EVERY repo, just the essential updates to the core OS. I really just want to eliminate that 45 min/256 file download that takes place each time I install a new system.
I have set up proftpd many times now one Ubuntu 9.10 and never ran into any problems. I decided to go ahead and do a clean install of the new 10.04 and set everything back up (ie ssh ftp apache... ect)I got done with ssh with no problems and started working on getting proftpd up and running just like I've always have. But now every time I try to login it gets to where it should list all the files in my dir and it just times out. If I connect through my network (192.168.1.101) everything works fine so I dont think its my .conf file.ll ports are open that are needed and I even tried opening up the passive ports to see if that would help but it does not.
View 1 Replies View RelatedI finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.
[code]...
installing mysql server manually. i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
View 9 Replies View RelatedI am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....