OpenSUSE Network :: Not Able To Connect To Update Servers And Some Servers On The Web
Dec 16, 2010
Problem with my Internet connection. I can't connect to the update servers. I don't know why. It's a brand new installation, not a week old yet. I can't install the support for restricted media for example. The servers won't refresh in YaST. It tells me it can't download the repomd.xml.asc.
The other problem is that some servers on the web won't load for me either.
For example, I get most of my local news from The Toronto Star, and I can't connect to it's website at all.
I can from Windows (I dual boot) but not SUSE. I don't think its a problem limited to that one website either. I am able to connect to most websites though.
This is the result of zypper repos -d
Code:
View 9 Replies
ADVERTISEMENT
Jun 8, 2011
Is there a way to access today the openSUSE servers via IPv4? My ISP does not support ipv6, nor my router, and I can't install software right now in openSUSE, because it wants to access te servers via IPv6.
If would be grat to have the download.opensuse.org ipv4 address.
I really need to install some packages, they are required for my school project.
View 9 Replies
View Related
Feb 18, 2011
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
View 4 Replies
View Related
Jun 14, 2010
I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies
View Related
Jun 24, 2010
Does anyone know, or have any experience with, what the best way to set a network interface on a linux server to be up - so that virtual machines can bridge through the physical interface, but not allow anyone on a network to connect to the server itself? Thank you
View 1 Replies
View Related
Mar 4, 2011
I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies
View Related
Aug 15, 2010
Today when I logged into my fileserver it told me there were 20 updates available. I went ahead and installed them, one was a new kernel. After reboot, I cannot see that machine when I browse the network. It still has the same static IP and I can still map to the shared drives, so Samba is working. When I browse the network from Windows or my WDTV Live media play it no longer shows the server by name. The smb.conf file is still intact and I restarted Samba. Not really sure where to start troubleshooting why I can't browse to it.
View 8 Replies
View Related
Aug 21, 2011
I tried to do a scheduled software update several times today (8/20/11) and nothing seems to download, though I do get the "Downloading" PackageKit dialog message (the System Monitor shows practically no network activity). In between tries I downloaded some 600 MB .iso files (about 10 minutes each) so I know my internet is working properly. That leaves either PackageKit got hosed in my last update, or servers are down.
View 2 Replies
View Related
Nov 8, 2010
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
View 9 Replies
View Related
Jul 6, 2011
I installed a simple VPN pptp. Works fine to connect to the linux server. However I would like to connect my other linux-server and (more important) my old Novell 6.0 server. Anyone have an idear what I need to change?
View 3 Replies
View Related
Jul 10, 2011
I can reach the internet just fine with OpenSuSE but when i try to dig mx gmail.com
;<<>> DiG 9.7.3-P3 <<>> mx gmail.com
;; global options: +cmd
;; connection timed out; no servers could be reached
I don't know what to do, YaST always seems like it'll time out but eventually it reaches the internet. Can anyone give me some diagnostic commands to see what is slowing down the network on the server I'm running?
I can't connect to imap or smtp ports remotely.
Edit: I left out one thing, this is a mail server and a web server. Both are not currently being used as this is a fresh install of OpenSuSE
All other devices work fine with dig. Its just the server.
View 1 Replies
View Related
Apr 29, 2011
When I set my DNS servers via Yast>Network Devices>Network Settings>Hostname DNS it accepts the addresses, but then when I check then the next time they are faded out. I set them again, but same results.
View 6 Replies
View Related
May 22, 2011
It seems I can't access smpt servers both from kmail and php. Kmail says
Code:
Sending failed:
smtp.gmail.com
The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder.The following transport was used: ... I double checked my settings and they are correct. I can ping smtp.gmail.com. I can send emails using thunderbird on a windows box that is connected to the same network as I am.I also tried turning off the firewall through yast but no joy.
View 1 Replies
View Related
Jan 27, 2011
I'm running OpenSuSE 11.3 (64 bit) with the latest kernel update as of yesterday. I've recently moved from NFSv3 to NFSv4 on 4 servers. Between the 4 servers there are 9 exported directories. All of them work except 1 on 1 of the 4 servers.
/etc/exports
# NFSv4 fsid=0 for the top level directory
/export *(rw,fsid=0,async,no_subtree_check,insecure)
# End
# NFSv3
/export/apps/oracle *(rw,async,fsid=7,no_subtree_check,insecure)
/export/ftpserver *(rw,async,fsid=6,no_subtree_check,insecure)
# End
I had to keep the NFSv3 entry as I need that as the mount doesn't work with v4.
/export directory listing
/export:
total 5
drwxr-xr-x 4 root root 104 2002-08-08 16:47 .
drwxr-xr-x 33 root root 944 2011-01-25 17:28 ..
drwxr-xr-x 10 root root 232 2010-01-26 10:01 apps
drwxr-xr-x 8 root root 4096 2010-12-13 12:31 ftpserver
/export/apps:
total 0
drwxr-xr-x 10 root root 232 2010-01-26 10:01 .
drwxr-xr-x 4 root root 104 2002-08-08 16:47 ..
drwx------ 3 root root 72 2008-08-06 16:40 etc
drwxr-xr-x 2 root root 240 2011-01-24 03:00 htdig
drwx------ 3 root root 72 2008-08-06 16:40 lib
drwx------ 2 root root 48 2002-07-02 13:18 lost+found
drwxr-xr-x 4 oracle oinstall 104 2009-01-07 09:59 oracle
drwx------ 5 root root 120 2008-08-06 16:40 usr
Now on any of the 4 servers if I do:
# mount -t nfs4 machinename:/apps/oracle /mnt
mount.nfs4: mounting lister:/apps/oracle failed, reason given by server:
No such file or directory
But the other sub-dir of /export is fine:
# mount -t nfs4 machinename:/apps/ftpserver /mnt
If I mount the pseudo root:
# mount -t nfs4 machinename:/ /mnt
# ls -l /mnt
total 4
drwxr-xr-x 2 root root 48 2002-08-08 15:20 apps
drwxr-xr-x 8 root root 4096 2010-12-13 12:31 ftpserver
But the apps sub-dir is empty
# ls -l /mnt/apps
total 0
On the server:
# ls -l /export/apps
total 0
drwx------ 3 root root 72 2008-08-06 16:40 etc
drwxr-xr-x 2 root root 240 2011-01-24 03:00 htdig
drwx------ 3 root root 72 2008-08-06 16:40 lib
drwx------ 2 root root 48 2002-07-02 13:18 lost+found
drwxr-xr-x 4 oracle oinstall 104 2009-01-07 09:59 oracle
drwx------ 5 root root 120 2008-08-06 16:40 usr
Well that explains why the NFSv4 mount of /apps/oracle fails because for some reason it can't "see" any files below that, but as I say the ftpserver sub-dir & mount are fine.
View 9 Replies
View Related
Apr 2, 2010
I dont know were to begin to solve my problem and I have been googling for hours to get a hint without any success. I'm runnning a Counterstrike Server on my virtual openSuse server - I'm exploring so don't justify what I am hosting at the moment
I want to make it possible to gain access to the cstrike folde via a ftp login. But I really have no idea were to start. The server is also a webserver, where I can ass FTP accounts for my apache vhosts via plesk - but I dont think this is the solution of my problem, isn't it?
View 2 Replies
View Related
May 29, 2010
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
View 4 Replies
View Related
Apr 26, 2011
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
View 4 Replies
View Related
Apr 19, 2009
I've install F10 to use it as server and router and found a strange problem on my XP machine which is behind the F10. I've tried to update my Lineage2 client from official server but the update crash, tried to open the web page it didn't open. Also tried to open microsoft web it didn't open. When i try to open the same pages on PC with F10 they open with no problem.
[Code]...
View 6 Replies
View Related
Aug 21, 2010
I have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/e/eglibc/libc6-i386_2.10.1-0ubuntu16_amd64.deb
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch http://archive.ubuntu.com/ubuntu/pool/multiverse/s/sun-java6/sun-java6-jre_6-15-1_all.deb Connection failed [IP: 91.189.88.31 80]
Ubuntu Restricted Extras stalls when it's time to download the Java package I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I tried searching for the errors on the net and in the forums, and they're all somehow related to proxy servers. I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup.
Take note though, that I am able to install other softwares normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer. It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
[code].....
View 3 Replies
View Related
Feb 11, 2011
I was running 10.04 LTS and had decided to stick to the LTS versions as I'm now running my machine as a server and don't want to be updating regularly.Every time I logged in via SSH I got a message telling me there where packages to update including a security update. So I did a search to find out how to perform an update on Ubuntu server from the command line.What I found was to do this:sudo apt-get updatesudo apt-get dist-upgradeAfter doing that I rebooted but now my machine gives me this message:
init: ureadahead-other main process (794) terminated with status 4Your disk drives are being checked for errors, this may take some timePress C to cancel all checks currently inprogressI'm not pressing C yet and leaving it alone to finish, but I noticed when the machine booted that one of the options for booting talked about Ubuntu 10.10, so I'm worried that I've updated from 10.04 LTS to 10.10 by accident?
View 8 Replies
View Related
Aug 13, 2011
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies
View Related
Feb 25, 2011
I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)
With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.
View 6 Replies
View Related
Mar 10, 2009
I installed vsftpd in FC6 and made it started and listen. I can use ftp in local machine to connect ftp on another machines, but I cannot connect the ftp of local machine from other computers in the office (the same network). I can use ssh to connect the machine, so I don't think it should be a firewall problem.
But when I type ftp and the IP try to connect the ftp, after a long time show up:
ftp: connect: Connection timed out
View 11 Replies
View Related
Feb 24, 2010
I need ssh to connect to other servers, but I want to disable the sshd server on Ubuntu 9.10 because I don't want incoming connections to my workstation.
Disabling sshd won't effect my ability to use the ssh client to connect to other servers, correct? How do I go about disabling the ssh server on Ubuntu 9.10?
View 9 Replies
View Related
Jul 31, 2010
I've been having trouble with a newly configured server running on Ubuntu 10.04.1.
I can login fine via SSH the first them. Then if I want to open another session from another terminal tab, I kicks me right away. The server shows me the greeting message but then the connection immediately closes.
I can't seem find any info on this.
View 9 Replies
View Related
Jan 24, 2011
I am trying to set up my computer as a server for things like minecraft and ventrilo. I cannot get anybody (myself included) to connect to the servers I set up. I think it has to do with my ports not forwarding properly, or the computer using ipv6 instead of ipv4 for some strange reason. I say this because I KNOW I set up the port forwarding in my routers setting correctly, but when i browse to a port checking tool, it says they are not. How can I get people to connect to my servers, which seem to be running and functioning?
View 2 Replies
View Related
Mar 13, 2011
I have slackware 13.1 version. When I use console I connect to ftp servers via ftp but not via sftp. I cannot connect to an ftp server with mc. I think that mc uses sftp. How can I make mc use ftp instead of sftp to connect to an ftp server?
View 2 Replies
View Related
Oct 25, 2010
I am not able to connect to network after update F13 to 2.6.34.7-61. Because there is "no netwokr decvice" IAW network manager. There is nothing in system log that abonormal. But, there is a fail initialization in the boot message. "applying firewall rules: iptable v1.4.7:Ip6table-restore: unable to initialize table .filter error occur at line 3 try Ip6table-restore -h or Ip6table-restore -help for more detail"
so, I tried the comment at terminal with root clearance, it just give some feed back about how to use this command. When I tried out other options. none of them work. There is no feed back form the terminal other than previous display and blanking cusor.
I assume it was the firewall preventding me to connect to network. And I complete disable SELinux and reboot. Problem remain, no network device. Check network device driver. There all inplace. Tried using old kernel, unble to boot up X window, presumably old driver has been deleted.
BTW, after two consecutive update failure (2.6.34.7-54 kernel panic VFS? problem, 2.6.34.7-61 no network connection), I assume Fedora Quality should consider review their update release process. Since the probability of fedora releasing bad update is increase a lot after fedora 11.
View 10 Replies
View Related
Aug 30, 2010
I am running Ubuntu Server 10.04 on an old desktop PC. But after some uptime (not sure exactly how long) it simply loses connectivity. Odddly, I can get on to the Server (Plug a monitor and keyboard in) and connect out (ie use lynx to go online or ping various websites) but I can't connect in from anywhere. I can't connect on the same LAN and I can't connect to it from the WAN IP address.
I have http, squid http proxy, webmin, and ssh running. I can connect to none of them when this happens. I am using ufw (I don't need the versatility of iptables... too complicated for my needs). ummm I can't think of anything else extremely pertinent....
View 9 Replies
View Related
Jun 12, 2011
I just recently installed ubuntu 11.04 server on an emachines etower, 400MHz intel celeron, 256MB RAM. I've tried installing apache2 and python3, but cannot get it to connect to the internet. while I understand how to work in a command line, I'm not sure what to do to diagnose the problem. I can list all the packages if it would help. (it's a fresh install so far), as well as the ethernet statuses (two cards for a firewall type setup)
View 5 Replies
View Related
