i have php5 and mysql on ubuntu server which is hosting a WordPress blog. i activated it remotely over the internet and it works fine still over the internet. now im home and using my local network again and now when i try to go into it with its local IP, it just shows some text (blog title, posts and so on) with NO pictures.
View 2 RepliesI jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.
View 4 Replies View RelatedI have a home network set up that includes windows xp and a local server. DNS resolution allows both machines to access the internet. I know this because firefox works on the xp machine, and yum works on the fedora machine.I can see the server index page through firefox by ip. I can't see it by url.
/etc/sysconfig/network settings:
NETWORKING=yes
HOSTNAME=fred.mycoachdomain.com
[code]....
I would like to experiment a "green" idea of virtual desktop where multiple users are served by a single powerful machine.
I have a server running 24/7. The monitor of this machine is turned off most of the time and the OS is on the login screen.
Other users, in the same local network, use less powerful machines, which could be a thin client or an old Pentium 3 machine. They access their accounts remotely and work with the GUI as if they were sitting in front of the server. Each user sees their own desktop (different themes, screen resolution, etc.). And of course it can happen that several users could log in at the same time.
The usage is modest: mostly web browsing and the usual default applications (office, wine, gimp, etc.). In particular no games or any demanding applications. The users want to use their desktop in graphical mode only.
Question: How do we call this way of using a server? Is it possible with Ubuntu? And how to implement it?
I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.
Here's the setup..
Wired:
192.168.1.0/24 Gateway = 192.168.1.1
Route internet through here
Wireless
192.168.2.0/24 Gateway = 192.168.2.1
If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)
Code:
$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4
[code]....
With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.
building your own with perhaps LAMP. It appears the purpose of one is to test websites? Is it not possible to use your server on the web and actually host a website or blog or whatever?
View 6 Replies View RelatedI've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
I have small home atom-server on netbook (with damaged screen) with Intel Atom N450 1.6Ghz CPU and 1GB of RAM. I am looking for web server, that would not eat much resources when hosting wordpress blog (up to 50-100 readers at once in veeeeeery far future) - posts in most cases will be only text based, without big images or archives (I'm not sure if it is important).The brain of my atom-server is latest 32-bit ubuntu server, without X's, I access it from ssh console only. It is already:
- proxy gate for my internal network (squid)
- my gmail backup/IMAP (dovecot & getmail)
- file server for my internal network (samba)
[code]....
I want to run a server with multiple blog with worpress, is there a tutorial ?
View 2 Replies View RelatedDoes anyone know of a tutorial or site where I can learn how to monitor what sites people have been accessing on a network?
View 1 Replies View RelatedI Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies View RelatedI have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.
View 11 Replies View RelatedI have a linux firewall. I want to limit a ssh connection number from local network to internet .
Example :
Internal pc (192.168.0.10) start a ssh scan to the external (internet) host.
I want that iptables limit that host (192.168.0.10) and block ssh connection from this host at 3 attempt.
I've followed several guides and am trying to get NFS working on my local network. For starters, I think I should be able to NFS mount a drive on the server (192.168.1.65) TO the server. From there I'll work with another client (currently 192.168.1.80)
Code:
$cat /etc/exports
/media 192.168.1.0/24(rw,no_subtree_check)
$cat /etc/hosts.deny
portmap mountd nfsd statd lockd rquotad : ALL
[Code]...
The guides I've read seem simple, so I must be missing something easy. Can't figure it out, so I'm looking for help after googling for 2 hours.
Machine 1:Windows vista, using vireless, 1Gb netcard.
Machine 2:Ubuntu commandline server directly connected to router, 1Gb netcard.
Router is only a 1Gb router./etc/network/interfaces look like this:
[Code]...
I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies View RelatedWe are in the process for Integration Network with our Government Network.
Let say that our network are 192.168.0.0/24
And the Government network are 10.0.0.0/8
I want to know if the local network can resolve the internet names in Government Network. I am using Bind for DNS.
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
View 9 Replies View RelatedI've been researching this all day with no luck thus far. Basically I need to cutoff port 21/ftp access from IP addresses outside of my local network. My local IP range is something like 192.168.0.100 - 192.168.0.150 -- so anything outside of this range would automatically be blocked.
Any IP address outside of this range would be denied as I use SFTP for remote access, etc. from home, etc.
I've researched IP tables, tcp wrappers, etc. but am still unsure which would be best for what is probably a simple fix.
Relevant info: Vsftpd via Ubuntu Server 10.10
I am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....
I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?
View 4 Replies View RelatedI dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
My router is a DHCP Server.My Access Point is a DHCP Server.I'm wondering if it is really necessary and usefull.Is it possible to get an IP from the Router through the Access Point.For exemple I connect my laptop to the wifi Access Point and the IP is given by the router only.
View 2 Replies View RelatedI'm trying to setup a NAS for my network, the only problem is that I can't figure out how to do it. On my network I have about 3 computers however only I only use 2 of them so I thought that maybe I could use the third computer in such a way that I could access it 24/7 from the internet as a server for all of my files (school papers, music etc etc...). The only problem is that I don't know where to get started. Both of the computers I'm currently using are Windows and the one that I,hopefully, can turn into a server is running on Ubuntu.
View 4 Replies View RelatedI changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies View RelatedI have public IP and registered domain mydomain.eu. On domain provider DNS servers, mydomain.eu points to my machine called solis (10.10.10.1; this is gateway, dhcp and dns server; eth0 is outsite, eth1 inside my network). I have also laptop which is connected to eth1 through wireless AP. From laptop and solis I have access to outside and inside network without problems. Of course my dream is to have access to solis from local network using name 'mydomain.eu' but not fully name 'solis.mydomain.eu'.
View 5 Replies View RelatedI've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message:
Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80
I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.
I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.
Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
View 3 Replies View RelatedI am currently working on a project related to packet sniffing which has been implemented using the concept of raw sockets. I am using C language.I am able to decode the following details from the packets received from a local network,like:
source and Destination Mac Address
source and Destination IP Address
source and Destination port no
But I am having trouble in decoding the domain name when an user in the local network is logging onto internet.For eg. if a user in the local network is trying to log on to web using his browser say if he has logged on to url then from the packet I need to get the following details
source Mac Address from which user had logged on
source IP Address from which user had logged on
domain name