I have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan
View 3 RepliesI want configuration a DNS server for my area! What DNS server software is better than other software?
View 4 Replies View RelatedI'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
View 9 Replies View RelatedI am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....
I'm trying to setup a NAS for my network, the only problem is that I can't figure out how to do it. On my network I have about 3 computers however only I only use 2 of them so I thought that maybe I could use the third computer in such a way that I could access it 24/7 from the internet as a server for all of my files (school papers, music etc etc...). The only problem is that I don't know where to get started. Both of the computers I'm currently using are Windows and the one that I,hopefully, can turn into a server is running on Ubuntu.
View 4 Replies View RelatedI've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message:
Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80
I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.
I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.
Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
I have a home network set up that includes windows xp and a local server. DNS resolution allows both machines to access the internet. I know this because firefox works on the xp machine, and yum works on the fedora machine.I can see the server index page through firefox by ip. I can't see it by url.
/etc/sysconfig/network settings:
NETWORKING=yes
HOSTNAME=fred.mycoachdomain.com
[code]....
I 'am trying to set a web server to develop in local website, i follow the guide in server to install php mysql but i 've got this error to set up the password of mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)i'm a noob in linux so i don't know how to resolve it.
View 10 Replies View RelatedWhat is the best method to upgrade Fedora from 8/9 to 10? I have the DVD, and whenever I try to boot from the DVD it locks up the PC after selecting the default language stuff. I've run the media check on the DVD, and it passes with no problems. I am behind a firewall and for some reason the configuration is not allowing YUM to get through the firewall, but Firefox can get through (I have another post for this issue).
View 4 Replies View Relatedjust as the title states i need to upgrade my os from fc4 to fc10 first let me say i have no physical access to the box. all i have is root ssh access to it. So i need to know the best way of upgrading that will be safe. before i do the upgrade the server will be backed up so i will not loose any files. if the upgrade fails the data center will reload the os with what i need on it. but i would rather not have to format.
View 6 Replies View RelatedI want to backup my apache website using tar. I want to make sure all the permissions and such stay the same so that if I restore a website, it's ready to go exactly as it had been.I am using the following command and would like to know if there is anything else I should neeed to do?
tar --xattrs cvzf backup.tgz /path-to-webserver-files
Now my other question is since tar doesn't store absolute paths, when I run the restore I have to be in the root directory? In another words if I run the command in a user directory will tar do something retarded like encode the paths as ../path-to-webserver or will it just be path-to-webserver so that when I run the restore from the / folder it will automatically go into the right place?
So my server running FC4 died last night and I decided to go ahead with the long-awaited upgrade to FC10 while I was rebuilding my server. I use my server for a number of things including, but not limited to: router, firewall, web server, mail server... I have a typical configuration process that I have followed since before fedora, and it has worked well for me up through FC4, but my usual config process doesn't work on FC10.
First of all, I don't want SELinux running, I didn't see an option to not install it during the FC10 setup, so how to I properly disable or uninstall it afterwards? Second, I was unable to even configure the server to route traffic from my internal network to the web, here's the process I usually go through for this:
[Code]...
I don't have a static IP from my ISP, so I'm not quite sure how to add the default route. I think I need to do something like "route add default gw xxx.xxx.xxx.xxx eth1" where eth1 is my external NIC, correct?
What else do I need to do to route traffic? I noticed that I wasn't even able to ping my server from the internal network even though they are on the same subnet, my server's internal NIC has an address of 192.168.7.1 and my computer on the network has an address of 192.168.7.2. If I can get this going to I have internet access again at the very least, I can move forward with the web server, email, etc.
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
I made a big mistake on my FC10 machine-while trying to resolve a way to install vlc- I wrote the following command:"yum erase rpm lib".After restarting the machine fedora did not load... (might be funny- I laughed...).Do you know of a way top recover from this state? (I have the liveCD disk),
View 2 Replies View RelatedI and my friend use FC10 on our laptops. We want to share our data by creating a wired network between our machines because a wireless router is something what our pockets can't afford. What should I do for it? What type of wires and stuffs do I need? I Googled for some link for doing so in FC10 but couldn't find.
View 6 Replies View RelatedTwo nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies View RelatedHere's the deal: I had a nice little fileserver running under 2.6.27.21-170.2.56.fc10.x86_64.
3 disks in raid 5 ext4fs, then I thought..."hey I'm a greedy bastard..I want another drive!!
So I get it..do a normal mdadm --grow...after around 1100 minutes .. FINISHED!..whee..happy...
I decide to do a upgrade to 2.6.29.2-52.fc10.x86_64 to get the fix for growing the ext4..
reboot...
Code:
md: bind<sda3>
md: sdc3 has same UUID but different superblock to sda3
md: sdc3 has different UUID to sda3
md: export_rdev(sdc3)
md: sdd3 has same UUID but different superblock to sda3
[Code]....
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
I have a home network with 2 WINXP machines and one I am trying to load FC10 on. If I get FC10 to work, I will convert the others to FC10. I am trying to access the WINXP machines through my LAN. I have installed samba. I have gone through a lot of places to try to configure samba. Several places say I have to set the security level on the ethernet card using system-config-securitylevel. When I enter this in terminal, I get command not found. I checked with yum and it is installed. I have tried using the menus but cannot find it anywhere. I can see the FC workgroup from one of the WINXP machines but I cannot look into it. It says I don't have the right permissions. I would like to set it so I don't need a userid/password at all. Can I do this?
View 5 Replies View RelatedA FC10 server hung and had to be power-cycled. I suspect it hung because of an nfs mount timeout.
Now it does not boot. The error is libc.so.6 not found. Kernel panic. Attempting to kill init.
Booting under rescue:
ls: cannot access libc-2.8.so: Stale NFS file handle
Is there a way to reboot to a clean state? There must be some NFS cache file.
I also tried to cp rescueCD:/lib64/libc-2.8.so to the old lib64 dir, but get the same "Stale NFS file handle" message.
I'm trying to set up a *simple* MTA in my local network. The only thing it should be able to do is send system / daemon mails to admin@mylocaldomain. but at the moment I'm pretty much overwhelmed by everything i *should* know in order to set up this MTA
my infrastructure:
- servers:
* test01.mylocaldomain --> should send mails (with exim) to admin@mylocaldomain
* dns01.mylocaldomain --> dns-server
* mail.mylocaldomain --> mail-server (postfix / iredmail package)
I configured exim to be in "internet"-mode. now i have a variety of errors I can choose from (and a variety of solutions that i don't like ).. my test is always an email from test01.mylocaldomain:
echo "Hello World" | mail -s Testmail admin@mylocaldomain
- after running the config, i get the error: admin@mylocaldomain: all relevant MX records point to non-existent hosts --> google says, edit and udpate update-exim4.conf.conf --> dc_relay_domains='mylocaldomain' --> but this exim installation should not be a relay at all. it should only be able to SEND (to this domain), not deliver it. or do i get something wrong?
- after i added dc_relay_domains='mylocaldomain', i get --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 550 5.1.1 <root@mylocaldomain>: Sender address rejected: User unknown in virtual mailbox table --> but i don't want to create an account on the mailserver for the SENDER...
- ...so i thought, i'd config exim with the domain "test01.mylocaldomain" (including the server name), so that the sender is clearly from another domain than the mail server handles (e.g. user@test01.mylocaldomain).. but then i get this --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 450 4.1.8 <root@test01.mylocaldomain>: Sender address rejected: Domain not found
I really just wanna send mails in my local network.
I will see ipcam in my local network from my tablets. I'm install server/client but I can't even ping my Ipcam from my tablet.I'm ping my ipcam from my server
Code: Select allping 10.42.0.22
PING 10.42.0.22 (10.42.0.22) 56(84) bytes of data.
64 bytes from 10.42.0.22: icmp_seq=1 ttl=64 time=0.639 ms
eth1:1 Link encap:Ethernet HWaddr 00:25:22:1c:6e:05
inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.42.0.1 P-t-P:10.42.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1775 errors:0 dropped:0 overruns:0 frame:0
[code]...
my tablet can receive ip, can see ftp on server but can't see anything in my home network.
I have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
I have three Debian systems running, along with several XP laptops, PS3 and two DirecTV systems. I use two of the three Debian systems as media servers, and the third is an older system mostly for playing around with. My home network is running fine with the following nuisance. The two newer Debian (Lenny) systems are <barney> and <mitzi>, the older is named <oscar>, running Debian Sarge 3.1. From either locally or remote login to <barney> and <mitzi> I can ssh into either of the other two systems, however when logged into <oscar> I cannot ssh by name to either of the other systems. e.g. ssh: mitzi: Temporary failure in name resolution..However, from <oscar> I can ping outside my network (e.g. ping www.google.com) with no problems.I can also ssh to the other systems via IP address, just not by name.
I've compared the /etc/ssh/ssh_config, /etc/resolv.conf, /etc/ssh/sshd_config and other files between the two systems and not seeing anything peculiar. arp, route, etc., don't show different behavior between the systems either.
At home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedRecent FC10 totally clean install. Fully updated using yum.
Using gui /system/administration/network I set up my DNS to the two IP addresses I've been given.
$service network restart
cat /etc/resolv.conf and the secondary DNS has changed to the IP address of my
gateway (router, at 192.168.2.x)
I.e. something is overwriting resolv.conf
Prior to this install, I'd been successfully using fixed IP on the 192.168.2.x range quite happily. Now it only works on DHCP and DNS seems to take an age.
I'm relatively new to Linux, but willing to take a plunge and climb the steep learning curve! I've recently installed Fedora 10 on a spare box I'd like to have running in the lounge by the TV as a TV recorder. Before starting out with MythTV, I would like to get the box running the basics... and hit no major snags with display / audio drivers. I've finally managed to connect to the box via VNC from my macbook over the wireless network. The Apple standard client is slow over wifi, so have started using 'Chicken of the VNC' as the client. At the server end, I intalled vnc-server via yum. I've also tweaked things in ~/.vnc/xstartup so that my default window manager over vnc is gnome.
[Code]....
We are in the process for Integration Network with our Government Network.
Let say that our network are 192.168.0.0/24
And the Government network are 10.0.0.0/8
I want to know if the local network can resolve the internet names in Government Network. I am using Bind for DNS.