Fedora Servers :: Apache On Local Network Does Not Work

May 23, 2010

The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.

I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.

View 10 Replies


ADVERTISEMENT

Fedora Servers :: Apache Will Not Serve Beyond Local Network

Jan 6, 2009

I've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message:
Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80

I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.

I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.

Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?

View 5 Replies View Related

Ubuntu Servers :: Apache Setup For Hostname Access On Local Network

Apr 13, 2011

I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].

View 3 Replies View Related

Fedora Servers :: Install Php When Apache Is In /usr/local/apache2 ?

May 1, 2010

I need to know how to install php when apache is in /usr/local/apache2

View 6 Replies View Related

Fedora Servers :: Apache Php Upload Not Work

Dec 24, 2010

I've write a php code to upload files. by move_uploaded_file. I've given 777 to the folder. But file upload unsuccess, error log show no premission. I test the code in Centos it wotks. I change the dest folder in Fedora to /tmp it works, but it only work on /tmp. neither /tmp/abc nor /temp. I guess it's a setting problem on apache or php. I also copy http.conf and php.ini from Centos, but mod_file_cache and mod_mem_cache not find in Fedora.

View 2 Replies View Related

Fedora Servers :: FC10 DNS Server Configuration For A Local Network?

Jun 28, 2009

I have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan

View 3 Replies View Related

Ubuntu Networking :: Apache 2 Only In Local Network?

Mar 4, 2010

How to make apache 2 accessible only on the local network? I have installed it in the easy way (but not the best, probably):

Code:

sudo apt-get install apache2 php5 php5-mysql mysql-server

And now I want to make apache only accessible in my local network.

View 2 Replies View Related

Ubuntu Servers :: Local Apache Is Not Refreshing Pages?

Jul 16, 2010

I own several websites and have always developed on my local Apache server.

I am in the middle of releasing a new product on one of my sites and have been making rapid changes to the site based on feedback from customers, etc. as my product has gone live...

My local server is NOT refreshing pages. I make a change, click "refresh" in my browser and nothing happens.

I have tried clearing my browser cache and it makes no difference. Eventually (several minutes later) my changes happen.

Problem is, I need to be making these changes rapidly, and I really prefer to check my work on localhost before uploading it to a live server where I'm getting a lot of visitors right now.

This is a very recent problem as I have never had this occur before. Running 10.04.

View 9 Replies View Related

Ubuntu Servers :: Apache: Working Folders For Local User

Sep 23, 2010

I want to setup a folder (several really) for websites that use PHP.

I am running Linux Ubuntu with PHP, APACHE installed.

The Apache server works in Firefox as 127.0.1.1 no problem.

The default directory is (DocumentRoot) /var/www This is stored in a file called /etc/apache2/sites-enabled/000-default

PHP executes no problem, if it is in the default directory (/var/www).

However, I'd like to activate PHP in a folder on another hard-drive (also).

In that folder I'd like to store several websites, all which will use PHP and MYSQL.

The problem is, my boot drive where /var/www currently is located has only 2 gig of space (21 gig for operating system, which seems high).

PHP files in the other hard drive do not execute, even under APACHE server.

How can I safely change the PHP enabled folder? How can I add more folders, without erasing the current one?

View 2 Replies View Related

OpenSUSE Network :: Local Apache Not Recongnizing New Folder?

Feb 5, 2011

I'm running OpenSuse 11.3 X64. I have installed apache2, PHP5 and MySQL in order to do some web-design offline e.g. they are for internal network use only. There is also phpMyAdmin installed. The default directory for the "server" is /srv/www/htdocs.

To access a specific site in progress I create a subfolder there then just navigate via h**p://10.13.23.201/NAMEOFFOLDER from my internal network. At least that is how it should work but it doesn't. I created a new folder called wlc so it's directory is /srv/www/htdocs/wlc however when I go to the address h**p://10.13.23.201/wlc I get a Remote Server Or File Not Found error from my browser, there is files in there ,index.php, that should load and apache has been set to recognize *.php files.

I know the theory should work as I can access /srv/www/htdocs/phpMyAdmin by going to h**p://10.13.23.201/phpMyAdmin and it loads just fine. Also the error is different if I go to a folder that doesn't exist for example h**p://10.13.23.201/THISFOLERDOESNTEXISIT will return an Object Not Found error.

View 4 Replies View Related

Ubuntu :: Can't Access Apache Server On The Local Network

Oct 11, 2010

I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.

View 9 Replies View Related

Networking :: Apache Server - Host Local Website Within Network

Jan 11, 2011

I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?

View 8 Replies View Related

Debian Configuration :: Apache - Cannot Access Webserver From Home It's Available Only Within Local Network

Aug 21, 2010

I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...

View 6 Replies View Related

Ubuntu Networking :: Cannot Access Apache Server Pages From Outside Local Network

Jan 26, 2011

I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17

My site is at [URL]

Here is the output of ifconfig

Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

[Code]....

View 4 Replies View Related

Server :: Opensuse Apache Connection - Unable To View Website From Outside The Local Network

Jan 29, 2011

I am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.

View 2 Replies View Related

Ubuntu Servers :: Get NFS Working On Local Network?

Apr 30, 2010

I've followed several guides and am trying to get NFS working on my local network. For starters, I think I should be able to NFS mount a drive on the server (192.168.1.65) TO the server. From there I'll work with another client (currently 192.168.1.80)

Code:
$cat /etc/exports
/media 192.168.1.0/24(rw,no_subtree_check)
$cat /etc/hosts.deny
portmap mountd nfsd statd lockd rquotad : ALL

[Code]...

The guides I've read seem simple, so I must be missing something easy. Can't figure it out, so I'm looking for help after googling for 2 hours.

View 9 Replies View Related

Ubuntu Servers :: Local Network Very Slow?

Jun 13, 2010

Machine 1:Windows vista, using vireless, 1Gb netcard.

Machine 2:Ubuntu commandline server directly connected to router, 1Gb netcard.

Router is only a 1Gb router./etc/network/interfaces look like this:

[Code]...

View 4 Replies View Related

Ubuntu Servers :: How To Connect Local Network

Jun 14, 2010

I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.

View 9 Replies View Related

Networking :: 2 DHCP Servers In Local Network

Jun 3, 2010

My router is a DHCP Server.My Access Point is a DHCP Server.I'm wondering if it is really necessary and usefull.Is it possible to get an IP from the Router through the Access Point.For exemple I connect my laptop to the wifi Access Point and the IP is given by the router only.

View 2 Replies View Related

Ubuntu Servers :: How To Set Up Apache To Work With DynDNS

Jul 2, 2010

I do not know a lot about Ubuntu Servers, but I made one. I wanted to set up a web server using Apache and DynDNS. So far, I have created an account on dyndns.com and installed apache. I also installed another program (i dont remember the name) that had something to do with DynDNS. Right now, I can access the page on my server by using eLinks (text based web browser) and going to the address (myaddress.dyndns.org). If I try to access it from any other computer, I get a page that says 'Unable to Connect'.

View 1 Replies View Related

Ubuntu Servers :: 10.4 Needs Connected To Local Network And Internet?

Jul 2, 2010

I jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.

View 4 Replies View Related

Ubuntu Servers :: Can't SSH To Reformatted Server From Outside Local Network

Aug 16, 2010

I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.

View 9 Replies View Related

Ubuntu Servers :: FTP Access Inside Local Network Only?

Jun 8, 2011

I've been researching this all day with no luck thus far. Basically I need to cutoff port 21/ftp access from IP addresses outside of my local network. My local IP range is something like 192.168.0.100 - 192.168.0.150 -- so anything outside of this range would automatically be blocked.

Any IP address outside of this range would be denied as I use SFTP for remote access, etc. from home, etc.

I've researched IP tables, tcp wrappers, etc. but am still unsure which would be best for what is probably a simple fix.

Relevant info: Vsftpd via Ubuntu Server 10.10

View 9 Replies View Related

Ubuntu Servers :: Setup A DNS Server On Local Network?

Jun 14, 2011

I am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):

@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600

[code]....

View 1 Replies View Related

Ubuntu Servers :: Accessing Blog On Local Network And Internet?

Jun 29, 2010

i have php5 and mysql on ubuntu server which is hosting a WordPress blog. i activated it remotely over the internet and it works fine still over the internet. now im home and using my local network again and now when i try to go into it with its local IP, it just shows some text (blog title, posts and so on) with NO pictures.

View 2 Replies View Related

Ubuntu Servers :: Setup A File Server For Local Network?

Aug 15, 2010

I'm trying to setup a NAS for my network, the only problem is that I can't figure out how to do it. On my network I have about 3 computers however only I only use 2 of them so I thought that maybe I could use the third computer in such a way that I could access it 24/7 from the internet as a server for all of my files (school papers, music etc etc...). The only problem is that I don't know where to get started. Both of the computers I'm currently using are Windows and the one that I,hopefully, can turn into a server is running on Ubuntu.

View 4 Replies View Related

Ubuntu Servers :: Cannot Connect To Local Network After Changing Port

Mar 4, 2011

I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.

View 9 Replies View Related

Ubuntu Servers :: Root Domain Name Is Not Resovled From Local Network

Aug 22, 2011

I have public IP and registered domain mydomain.eu. On domain provider DNS servers, mydomain.eu points to my machine called solis (10.10.10.1; this is gateway, dhcp and dns server; eth0 is outsite, eth1 inside my network). I have also laptop which is connected to eth1 through wireless AP. From laptop and solis I have access to outside and inside network without problems. Of course my dream is to have access to solis from local network using name 'mydomain.eu' but not fully name 'solis.mydomain.eu'.

View 5 Replies View Related

Ubuntu Servers :: Cgi Doesn't Work With New Apache Site Configuration?

Mar 24, 2010

I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:

Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost

[code]....

View 4 Replies View Related

OpenSUSE Network :: Make Apache Mod_rewrite Work?

Jun 1, 2010

I want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved