Ubuntu Networking :: Cannot Connect To Local Network
Mar 25, 2010
up until about four days ago connecting to the local LAN was as simple as booting Ubuntu, and letting nm-applet automatically connect on Auto Eth0 But the other day it just randomly stopped working, with no cause that I can think of. I can still connect to the internet (This is via a PPPOE connection, running through the same wired interface) so it can't be a hardware problem with the ethernet port/cables themselves. nm-applet just stays spinning in circles, and nothing ever happens. I tried deleting the auto Eth0 entry, and creating another LAN entry with exactly the same settings, but I still get the same problems. way to completely restore nm-applet settings? Or some other way to give me access to the local network?
View 3 Replies
ADVERTISEMENT
Oct 23, 2010
I bought a new desktop Lenovo and got problem: I can`t to connect to my local network
Some output:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
[code]...
I tried ifconfig eth0 up, but nothing...
View 1 Replies
View Related
May 3, 2010
I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies
View Related
Sep 6, 2010
I am trying to connect to a nfs server on my local network ( the server is a fedora 12 box ) using slackware 13.1 but I am having some problems. First of all I am sure that the server is configured ok and my desktop can ping the server but when I try :
mount -t nfs 10.0.0.1:/home/usr/file /home/usr/tmp I get the following error : mount.nfs: No route to host
And when I try to rpcinfo -p 10.0.0.1 I get the error :
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
View 5 Replies
View Related
Jul 16, 2011
I have installed ubuntu 11.04 recently.. how can i connect ubuntu with other windows users in a local network...
View 1 Replies
View Related
Jun 27, 2011
Problem:Your company network has internal only hosts / websites with names that end in .local, e.g.Your freshly installed Ubuntu machine works fine on the network, has internet access, etc. but cannot connect to these particular systems.Testing DNS with tools like dig / nslookup works fine, but normal name resolution with ping / telnet / browsers does not work.Solution:1. Open a terminal window2. Enter the command sudo nano /etc/nsswitch.conf3. Change the following line:hosts: files mdns4_minimal [notfound=RETURN] dns mdns4to this:hosts: files dns4. Press Ctrl-X, Y, Enter to saveExplanation:Ubuntu ships configured to do name lookups for self-configuring networks, based on the AppleTalk / mDNS / Bonjour protocol. In the configuration shipped for the resolver, this protocol is considered the final aurhority for the ".local" top level domain, and DNS will not be checked. The above configuration change eliminates this and restricts lookups to (a) /etc/hosts file, followed by (b) DNS
View 1 Replies
View Related
Sep 15, 2009
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
View 2 Replies
View Related
Jan 29, 2011
Yhe only ptoblem was that he had forgotten the password to his network. This was really anoying and has happened before sp yesterday i decided to install some kind of WEP cracking tool so that it would not happen anymore.. After using sometime without getting anything to work i found this tutorial: [URL]
and started following it. i only got to the point where he has updated his computer using update manager and is about to patch his wificard. Then i noticed that the network manager for gnome was gone and the virtualbox logo in my top panel was changed to a red circle with a line running through it. I have tried to download network manager from another computer and installing it on my laptop but it needs internet to install. Then i tried to connect to my local network using terminal that did't work either i also tried connecting using a cable but had no luck connecting. The command iwconfig gives me:
[Code]....
View 4 Replies
View Related
May 16, 2010
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies
View Related
Jun 28, 2011
I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies
View Related
Jun 14, 2010
I am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies
View Related
May 25, 2010
I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
View 6 Replies
View Related
Dec 24, 2010
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies
View Related
Jun 6, 2011
I have been trying to remotely access another computer (which is outside my local network) with ssh and have not succeeded. I've done everything I've seen nothing to suggest and as I opened port 22 on both computers, I have ssh configured so as to allow access from any computer (with password) and tried to log in using the external IP (the encounter with these online pages of "what is my ip"), I have a firewall turned off, the pc from which I agree is Fedora 14 that I want to access MacOS 10.5.8.
I need this because I'm running a very heavy program at the university that I can not run on my personal laptop, but do not want to have to go every day to college for this.
View 1 Replies
View Related
Mar 4, 2011
I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies
View Related
May 31, 2010
I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
View 2 Replies
View Related
Jan 21, 2009
I wanted to be able to have separate NICs with separate IPs connecting to separate gateways on a machine so I could put an ftpd on each one. I tried binding an ftpd to each, and running separate instances of the ftpd. I tried virtual hosts.
NOTHING worked. I could either use one ftpd or the other. I could either connect via ssh on one IP or the other. the second I turned one NIC off stuff would work again. I messed with basic iproute commands, andnothng worked until I got this script to run, which allowed me to use each NIC independant of the other.
Code:
#!/bin/sh
#ip route flush all
ip route del default dev eth1
ip route del default dev eth0
ip route del table 1
ip route add table 1 to default via 10.10.10.1 dev eth1
code....
But now, samba client doesn't work. cifs mounting doesn't work either. It can't connect.
BEFORE I ran that script, I could connect via ssh, or to the ftpd running on the machine using a LOCAL IP - 10.10.10.2. AFTER, I have to use the external IP, or I cannot connect. I know that has something to do with it, but I do not have the advanced linux routing knowledge to redo the script or come up with a solution.
View 5 Replies
View Related
Mar 31, 2009
I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.
Here's the setup..
Wired:
192.168.1.0/24 Gateway = 192.168.1.1
Route internet through here
Wireless
192.168.2.0/24 Gateway = 192.168.2.1
If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)
Code:
$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4
[code]....
With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.
View 6 Replies
View Related
Nov 9, 2010
I have dynamic internet connection. In my network one machine run glassfish server in port 8080 (it IP address 192.168.1.3). If I type http://192.168.1.3:8080/ that load my glassfish server page. What I want is using dynamic IP like http://<DynamicIP>:8080/ load my glassfish server page. How can I do it ? My router is Dlink GLB-802C > I haven't good knowledge about network.
View 3 Replies
View Related
Jul 27, 2010
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
View 4 Replies
View Related
Sep 28, 2009
I am using Fedora 11 all upgrades, wireless network WUSB54G network adapter. I can get to the internet but cannot get to any Windows (192.168.1.100) or Fedora 11 (...104) computers, printer (....101, 105). Here are the tests I have run.
[root@Fedora2 sbin]# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.76 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=268 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.63 ms
^C
--- 192.168.1.1 ping statistics ---
View 1 Replies
View Related
Apr 9, 2011
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
View 5 Replies
View Related
Jan 21, 2011
If i want to use SSH to log on to my home computer, which is connected to the router, how do I go about connecting to it?If I get my external IP of the computer at home, it will show me the external IP of the router correct? Then I need to forward the router's external IP to my computer at home. But then, how do I connect using ssh? or do I need to consider my local IP of the computer at the router's network?
View 7 Replies
View Related
Aug 8, 2011
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies
View Related
Mar 4, 2010
How to make apache 2 accessible only on the local network? I have installed it in the easy way (but not the best, probably):
Code:
sudo apt-get install apache2 php5 php5-mysql mysql-server
And now I want to make apache only accessible in my local network.
View 2 Replies
View Related
Oct 28, 2010
I've been having strange local network behavior with my Ubuntu 10.04 box. First off DNS was pretty flakey, but I replaced the automated DHCP servers with 8.8.8.8 and 4.4.4.4. Now I see very strange behavior in my local network, the symptoms of which are frequent dropped connections trying to use FTP, VNC, or Samba to try and connect to my other machines. I did a tracepath and got this back:
tracepath 192.168.1.136
1: 192.168.1.105 (192.168.1.105) 0.112ms pmtu 1500
1: no reply
2: no reply
3: no reply
3: 192.168.1.105 (192.168.1.105) 3002.961ms !H
Resume: pmtu 1500
[Code],,,,
View 1 Replies
View Related
Mar 29, 2010
As it looks like the number of DNS Top Level Domains are just going to proliferate in the near future, use locally on an RFC 1918 private network in order to prevent a future name collision issue?
.local is the most obvious one but as that was stolen by Apple for mDNS/rendezvous use it's probably wise to avoid it now.
View 4 Replies
View Related
Feb 19, 2010
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
View 1 Replies
View Related
Jan 11, 2010
I remember back when I used Windows, there was a shell command call "net view", which would allow me to see all the other users on my wireless net.
Is there any command or application that can do this? I dont mind if it is a terminal command either, but I would really like to know a way that I could see other users on my network.
View 3 Replies
View Related
Jan 24, 2010
What I am trying to do is reasonably simple, I have 1 Ubuntu Desktop PC and 2 Ubuntu Laptops that are all connected via wireless network (remote desktop works perfect so no network issues)All I want to do is utilise the huge drive space on the desktop machine as a kind of fileshare for the two laptops so backups and music/photo sync can be done.
I have managed to do this using Samba in that from the laptops I can write files in Nautilus to the fileshare BUT the files have no owner, no group, and no permissions, this is the if I view from the client or server side.
IE I can navigate on the laptop to the shared are by the URL...in Nautilus right click and add a blank document and call it say "test".If I now have a look at the permissions it says "The permissions of test could not be determined"
View 7 Replies
View Related
