I just installed Kubuntu 10.10 x64. I copied de .conkyrc from my Ubuntu install, where it worked fine, to my Kubuntu install. But now, it's quite awfull. I've put a screen at the bottom of the post.[URL]
View 1 RepliesAfter seeing this conky profile I decided to try my hand at making something similar, as my conky profile looked pretty unappetising.All my conkyrc file does at the moment, is display an image and I seem to be falling at the first hurdle. I would like the image to be flush to the bottom of the screen however it floats about 100px above the bottom of the screen.Screenshot attached and conkyrc file below. Does anyone know how to fix this?
Code:
use_xft yes
xftfont Liberation Sans:size=11
[code]....
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedI have Windows XP & Fedora 14 on separate hard drives.seem to see POST upon startup. Same for Windows or Linux.
View 14 Replies View RelatedWhen restarting my dual boot system I wanted to start Win XP. Scrolling down the list I think I hit the left arrow key by mistake. I got what I think is the recovery menu. I chose #1, Continue Normal Boot (at least that's what I think it was). Then I was prompted for my login and password. The system accepted those and seemed happy but will go no further.
I've tried entering 'exit'. This simply causes the system to ask for login and pword again. see the attachment of my screen. I've searched the forum and haven't found a similar situation with a solution.I am reluctant to pull the power to shut down. Until this my system has been very stable and reliable.
I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 Replies View RelatedI installed a Raid 2+0 a couple of days ago with windows 7, and everything was working fine until today. I left my computer for a couple of hours and when i came back all i see is this black screen with a blinking cursor, then i tried everything on the bios but every time i tried to boot it kept stuck there, right after the bios POST.Then i tried changing the SATA ports, that was something that fixed similar problems on my old Mobo, but this is strange because this mobo has 1 week, and the HD's (2x seagate 500gb) have 2 days, so they should be fine.
Then i tried with my ubuntu lucid lynx live cd, it has saved my life many times, it always works flawlessly and i thought i could use it to restore the boot files, but i was very surprised when it failed as well, it pops a message saying something like "invalid user pwsuid "user: unknown"{0}". Tried it many times with no luck, only that same message...Now i managed to boot from a "slitaz" linux dist. thats about 30mb, it has many useful tools.I can see the partitions/HD's on the Gparted and mount applications, but i still i havent managed to mount the raid i had on my Windows 7 install, im a bit scared of losing data, and i dont even know how to do it.Is there any way to fix thisrom the slitaz live cd?Maybe i could mount the Raid and then restore the Boot files from the slitaz live cd? I have a windows image i could use on the Raid, and i could copy the image files to a partition, make it primary, active and bootable...I really dont know, maybe that wont help either because the ubuntu live cd couldnt boot, i really dont know what whats going on and what could be the cause of this... maybe a worm/virus
I have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:
Holding shift on startup - Nothing
Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.
I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.
I downloaded some software yesterday from the ubuntu rep. This morning my screen has the bottom part of in black there are the KDE docky ,firefox ,terminal & rhythmbox icons ,so is the taskbar..but the wallpaper is cut up ,4cm off. I have noticed that the splash screens res has changed too. It's sharper (smaller). The browser as a consequence is also half lit & having noscript in the bottom without it being visible is a problem. Why has this happened & how can I fix it. The last working config, well that's somewhere else.
View 3 Replies View RelatedSo about an hour ago I put my computer on standby. For whatever reason I couldn't bring it back so I restarted it. It works fine except now Ubuntu has pushed my display down. This means that the bottom of my tool-bar on the bottom of the screen is cut off, and there's a black bar on the top. I'm using a T.V. screen so there is no way I can manually adjust it. I also plugged my desktop back into an old monitor and it was off-center downward too.
View 1 Replies View RelatedSaid that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedI was wondering how to set black fonts in conky, I'm pretty new to the software. This is my .conkyrc. I cobbled it together from a few different sources:
Code: background yes
use_xft yes
xftfont HandelGotD:size=9
[code]...
VLC, ubuntu 10.04 i was wonderin when watchin a movie how do i remove the black bars that are on top & bottom of the screen?
View 3 Replies View RelatedI am using Xubuntu 10.10 64bit . When I press the quit or logoff buttons on the desktop it takes me to the logon screen and then at the bottom right corner it allows me to shutdown or reboot. I would like to bypass this screen entirely,and just shutdown reboot from the desktop. Only I use this machine at home ,no none else needs to log on. Is there any way to do this?
View 3 Replies View RelatedI am NOT willing (nor is my IBM T41 for that matter) to make from source the new conky 1.7.2, so can someone give me a deb file for squeeze that I can install to my system to replace my current 1.7.1 conky? I really want to use lua scripts. (Specifically: [URL])
how to remove the black area behind conky without using compositing?
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View Relatedknow the bottom bar on the screen? yeah mines gone and idk how to get it back
View 9 Replies View RelatedUsing UNR10.04 and have an issue where menu screens are hanging off the bottom of the screen. Happens pretty regularly, but for example, a moment ago, I was trying to switch to Google Public DNS, in the network preferences, have to click apply/ok but cannot do so as the menu box is larger than the screen. Is there a way to scroll down or make the window smaller so that I can click buttons outside standard screen.
View 4 Replies View RelatedI'm just started using 11.04 and I wanted to put Launcher at the bottom of the screen, because I'm used to shortcuts being at the bottom of the screen. How would I go about doing this?
View 5 Replies View RelatedI am pretty sure this is an easy fix but I couldn't see anything in the preferences menuI keep getting really stupid notifications at the bottom right of my screen. Things like "click to start dragging"
View 4 Replies View RelatedOS: Windows 7Problem: Want to dual boot Ubuntu and Win 7, but OS screen won't show after POST.I need some assistance in installing Ubuntu 10.10. This would be my first Linux installation, all I have done otherwise was virtualize Ubuntu 9.10.I have tried installing two times now but I can't get the boot screen to pop up for when I dual boot and check my OS.So here is what I did, not ever partitioning a drive before for duel booting:1. Go into Disk Manager and shrink the volume of the main HD by 25GB (I was going to use this for Ubuntu)2. I then inserted the Live CD with Ubuntu 10.10 on it and proceeded to install, however when choosing where to install it, I chose the advanced options and chose the partition that I set aside as free space for Linux (25GB -- 25600MB).
3. I set the boot loader to this partition, as the other partitions are the w7(windows 7) loader and the label of the HD. The partition was labled dev/shd5 or something like that. But when I am done installing and try to boot normally the screen where I am to choose which OS to boot does not appear.Question:What should I do to dual boot? I also tried selecting boot alongside another (or similar) and set the same settings as using the dev/shd5 free space that I allocated (25GB) and placing the boot loader on the same partition, which is not the main partition.I do not want to overwrite the Windows Partition as I have things on there that I will need,
I've been running Ubuntu 10.10 since its became available and have recently dialed in my conky config. All has been working just fine. I usually leave my system running 24x7 and will reboot it or shut it down from time to time.
I have conky running via a command line (manual) and as soon as I enter 'conky' it will run immediately. However, this morning I rebooted my system, ran conky in a terminal window as I usually do...nothing the usual script shows up in the terminal window, but conky didn't appear on the screen. I've not changed backgrounds, changed my .conkyrc file, nothing. I removed conky and reinstalled it and pulled a new .conkyrc from a backup. I could read the original just fine, but thought perhaps the . file had something wrong. Still the same results...conky didn't appear on the desktop. Here is what is really weird.
After about 3 or 5 minutes, conky appeared on screen and is running fine except its no longer pulling my external IP number via:
Why its taking conky so long to appear on the screen?
Insert the boot disk into the drive, boot with dvd drive. get a purple screen with keyboard on the bottom then BAM. Input signal out of range(no video). Hanns G 28' 1080p monitor PNY GTX 260./tear
View 9 Replies View RelatedI'm getting a screen that has what looks a like a keyboard, equal-sign, then a person in a circle. This happens when I go to install it. I have made new discs and everything and nothing but the screen.
View 2 Replies View Relatedhe is used to the regular netbook edition before the unity-style. The small netbookscreen is just not good for this new appbar on the left side (it's one of the old eee-pc's). None of us like that solution, and I wonder if its possible to move the bar on the bottom side of the screen so it will be a bit more Windows 7-ish?
View 6 Replies View RelatedA couple of days ago, without updating the system or installing any software (AFAIK), a weird blank bar appeared at the bottom of the screen of my Dell Latitude 2100 (check the screenshot for a better detail).It looks like, somehow, the resolution of the screen is now smaller (1024x576) and Ubuntu doesn't recognize anymore this small band of the screen.
View 1 Replies View RelatedI am trying to get conky to use the whole length of the screen instead of just have.This is my conky file. PLease help.
Code:
Conky 2
background yes
use_xft yes
xftfont HandelGotD:size=8
[code]...
What is the command to use to move conky to the middle of the screen and also have this every time it starts up?
View 1 Replies View Related