Software :: System Freezes (Sometimes) At 'Grub Loading Stage 2'
Oct 16, 2009
I'm using Arch with the latest updates and I'm pretty sure this is a software problem.Basically about one out of five times my system freezes at "Grub Loading Stage 2". Whenever this happens, I usually just reset my box with the reset button and it will boot up just fine the next time.I originally put it down to being a defect in my hard drive which is probably three years old now at least. However, last week I bought a brand new 1.5TB drive. I removed my old drive and am using only my new one. Same problem.I Googled for this problem and found a bunch of posts with the same issue as I'm having, yet all of those issues are with people that dual boot with Windows. I don't. I only have Arch and no other OS on my system. I then tried reinstalling Grub and that doesn't seem to have solved it.I'm hoping someone can help me out with this. I hope it's not a hardware problem. Any help is VERY appreciated as this problem makes me worry that something worse is going on.
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem? both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb. Jumpers are set to cable select. Boot order in bios is correct. (primary first, secondary isn't in the list at all)
My laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
I installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
A few days ago I installed openSUSE 11.4 on a 1TB HP external hard drive. I have some very important files for school and personal work on my main hard drive, running windows 7, so I made sure the installation only affected my external hard drive. With the external hard drive plugged in it boots just fine but when it is un-plugged it says Grub loading stage 1.5. Error 21 and it won't do anything. This kind of pisses me off because there were no warnings and nothing was supposed to happen to my main hard drive. But this has already happened and now I want to know if there is any way I could fix it so I can boot windows 7 normally and still boot openSUSE with the external hard drive plugged in.
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
I just installed LXDE by pluging the P-ATA drive into my current PC (with my 2 S-ATA drives being plugged in). Not worked first time, probably because I pushed the drive too hard into the old PC. Formatted again, installed LXDE again (this time my S-ATA drives plugged out). Works fine with the old PC, but when I try booting from my current PC now it says: "Grub loading stage 1.5 ... Grub Error 21". No menu, nothing ... And because I plugged my S-ATA drives out, when installing LXDE the second time, the config file, grub is probably searching for on the P-ATA drive, is somewhere in nowhere. Googled it 2 hours ... Yast2 Bootloader and grub-install are just trolling me. The drive I installed LXDE (32-bit) on, is an old P-ATA, with first 30 GB, then suddenly 80 GB (don't ask, I don't know either. First formatting was 500 MB swap and the rest Ext4. Second formatting was 1011 MB swap and the rest Ext4.
I'm trying to install Debian Lenny on my new Dell XPS 8100 Desktop with 2 x 1To SATA HD. (No Windows or any other OS install is present on the system) The Bios allows me to change the SATA mode to either "ATA" or "RAID"
- When SATA mode is set to RAID, the installation goes without issues, but when it comes to load into the system, I've got that Stage 1.5 Grub Loading... Error 2 problem. I assume this is due to the Bios "RAID" configuration. I then switched the SATA mode to "ATA" in the Bios and now I can see the menu that allows me to boot my debian install but that part actually fails too saying "ALERT /dev/sda1 does not exist"
- When SATA mode was set to ATA, I tried to re-install the system but this time my drive was not recognized by the installer: "No common CD ROM drive"
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
ok so i jut installed ubuntu from an old live cd, i had to upgrade it twice to get it currant, and i also have a win 7 os on my box. Now when I try to boot I only get as far as the grub loading screen where an error 17 pops up, google says thats because it can't boot the selected boot partition but i cant even select my windows partition. im on the old live disk right now.
Here's a screenshot of a sudo fdisk -l command [url]
Every time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
The only thing out of the ordinary I noticed is that when I clicked "Erase disk" I ended up with a choice of two: /dev/sdc (with no indication of free space but a capacity of 983.0MB), and /dev/sdc1 which showed 288MB free before I erased it and a capacity of 980.4MB.
This app has never worked on any system I've tried it on, but this particular machine is an LTS (10.04) with recent hardware so I'd like to get it fixed if possible.
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
I reinstalled Mac OSX and my Mac files on my 24" intel core 2 duo iMac from a Time Machine backup. The Linux and Swap partitions appear to be unaffected. However, rebooting into Linux 8.04 stops at the Grub stage.
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3 Kernel-pae 2.6.38.2-4.1 from Kernel Stable. GRUB 0.97-174.1 from openSUSE 11.4 Upstart 0.6.5-33.1 xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
Yesterday I partitioned my hard drive with kubuntu netbook remix and windows 7. after a few hours and reboots i turned on my computer and it said Grub loading. unknown filesystem rescue grub> It looks like allot of people have been having similar errors recently with windows 7.
I installed fedora on my laptop and everything went fine, i installed my bradcom drivers and rebooted. Next step was kmod for nvidia but when i rebooted i couldn't use fedora anymore cause loading freezes at some point. same thing happens to my desktop pc, where i solved the problem booting with an older kernel (this time i have an error saying "eth0 link not ready" or something like that). Everytime i try to boot with a more recent kernel loading freezes. The point is...i can go through with my desktop pc by choosing another kernel, but i can't even boot with my laptop.
I was not able to install any version of Ubuntu. Everytime when the splash screen would appear, the computer would freeze and no hard drive activity would be present. The only way was to use the alternate install version of Ubuntu 10.10. Though, the splash screen problem persists. After the Ubuntu boot screen disappears, the splash screen appears with the coursor. About 3 seconds later it becomes unresponsive and the hard drive light stops showing activity. After reading a lot, I think it's my video card driver. I'm a complete newbie, so any commands need to be written out so I can just type in and cross my fingers. I can boot into the GRUB recovery mode. I log in and have a text based setup at this point.You know, I can type sudo commands and all that jazz. How can I fix my video? The graphics is not integrated. It's a 32mb nvidia TNT2 PRO.
I'm trying to install Ubuntu 11.04 on this old desktop that is currently running WinXP. I get to the menu to choose to try ubuntu, install, or boot hard drive. I choose Install and it begins to load with those 5 dots then after a minute or so it just freezes on that screen. I then try to choose the "try" option and it does the same thing, although takes slightly longer before it freezes.I just happen to have a v8.10 disc laying around so I try that. I get to the same options menu, it loads, and then shows a black screen with a white blinking underscore. Same goes for when I use the "try" option.Specs:2.53GHz P41.5GB RAM250GB HDD
Every time I load my conky file, the screen just freezes. I have tried different conky script but still not working. I also provide some screen shot to have better idea whats going on. [URL]. This is the script I am using right now:
Code: # set to yes if you want Conky to be forked in the background background no cpu_avg_samples 2 net_avg_samples 2 out_to_console no .....
# Default colors and also border colors default_color white default_shade_color white default_outline_color white # Text alignment, other possible values are commented #alignment top_left #minimum_size 10 10 gap_x 15 gap_y 70 alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text # Add spaces to keep things from moving about? This only affects certain objects. use_spacer no # Subtract file system buffers from used memory? no_buffers yes # set to yes if you want all text to be in uppercase uppercase no # none, xmms, bmp, audacious, infopipe (default is none) xmms_player bmp # boinc (seti) dir # seti_dir /opt/seti # Possible variables to be used: .....
I am using grub4dos 0.44 but can't boot directly into Kubuntu. The bootup freezes at the step of reading the initrd. Can't copy 'n paste the exact bootup-message but it looks similar to this one, I found on another forum-thread:
Code: Filesystem type is fat, partition type 0x06 [Linux-bzImage, setup=0x1400, size=0xcff87] Unlike the guy who posted the two lines above, I installed Kubuntu on an ext3-partition (hd0,5), (which is /dev/sda6 in Ubuntu) and without an own bootloader, since I wanna use grub4dos instead of grub2. The installation is fresh - the initrd-file shouldn't be broken. My menu.lst looks like this:
