I use 2 monitors and Conky defaults to the top right of my right-hand monitor.I'd like to move it to the top right of the left-hand monitor.
'alignment top_left' moves it to the left-hand monitor, but obviously the left-hand side. I need it on the right.
What is the command to use to move conky to the middle of the screen and also have this every time it starts up?
View 1 Replies View RelatedI'm trying to work out with Conky on my Ubuntu 10.04 x64.
Conky is set to Top Left alignment, but it doesn't seem to be ending up there at all. After changing all of the different alignments, it doesn't seem to move around much at all.
(Desktop Screenshot Attached)
My other issue, which may have something to do with the way my Conky is set up, is that I have a couple of icons on the desktop, but they only show up when I put my mouse over them, and in the next couple of seconds they go away. It seems to be related to the refresh frequency of conky, which seems to be all of my issues right now.
Another note, this conky code is essentially pulled directly from the conky website.
(Code Below)
Code:
Said that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
When I installed 10.04 in April, I started having all sorts of problems with my Virtual Terminals (CTRL-ALT-F*). First they were inaccessible completely, then they were there, but not visible, i.e. I could use them to login and run commands, but there was no screen output, then they were gone again, and the fight just went on and on. I just recently got this functionality back after months just messing around, testing different peoples solutions, and really just not being afraid to break the whole thing. Ultimately, it boiled down to nVidea graphics driver problems.
However, now I notice that outside of gdm, the screen is not aligned properly. It seems to be about 2 characters to the left and several lines lower than it should be on VT1-VT6, while gnome is aligned perfectly. I can use my screens auto-adjust to fix the problem, but when I switch to another terminal, the problem comes back. It's not really a huge deal, but after all this trouble, I really just want them to work the way they are supposed to work. Does anyone know of a way to set the screen alignment via software, or am I just stuck dealing with it?
I've been running Ubuntu 10.10 since its became available and have recently dialed in my conky config. All has been working just fine. I usually leave my system running 24x7 and will reboot it or shut it down from time to time.
I have conky running via a command line (manual) and as soon as I enter 'conky' it will run immediately. However, this morning I rebooted my system, ran conky in a terminal window as I usually do...nothing the usual script shows up in the terminal window, but conky didn't appear on the screen. I've not changed backgrounds, changed my .conkyrc file, nothing. I removed conky and reinstalled it and pulled a new .conkyrc from a backup. I could read the original just fine, but thought perhaps the . file had something wrong. Still the same results...conky didn't appear on the desktop. Here is what is really weird.
After about 3 or 5 minutes, conky appeared on screen and is running fine except its no longer pulling my external IP number via:
Why its taking conky so long to appear on the screen?
After seeing this conky profile I decided to try my hand at making something similar, as my conky profile looked pretty unappetising.All my conkyrc file does at the moment, is display an image and I seem to be falling at the first hurdle. I would like the image to be flush to the bottom of the screen however it floats about 100px above the bottom of the screen.Screenshot attached and conkyrc file below. Does anyone know how to fix this?
Code:
use_xft yes
xftfont Liberation Sans:size=11
[code]....
I am trying to get conky to use the whole length of the screen instead of just have.This is my conky file. PLease help.
Code:
Conky 2
background yes
use_xft yes
xftfont HandelGotD:size=8
[code]...
I just installed Kubuntu 10.10 x64. I copied de .conkyrc from my Ubuntu install, where it worked fine, to my Kubuntu install. But now, it's quite awfull. I've put a screen at the bottom of the post.[URL]
View 1 Replies View RelatedEvery time I load my conky file, the screen just freezes. I have tried different conky script but still not working. I also provide some screen shot to have better idea whats going on. [URL]. This is the script I am using right now:
Code:
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no .....
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 15
gap_y 70
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer no
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# none, xmms, bmp, audacious, infopipe (default is none)
xmms_player bmp
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used: .....
I have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
when I type "conky" in terminal it returns with Conky: invalid configuration file '/home/user/.conkyrc' Conky: missing text block in configuration; exiting ***** Imlib2 Developer Warning ***** : This program is calling the Imlib call: imlib_context_free(); With the parameter: context being NULL. Please fix your program. I've tried completely uninstalling, rebooting, then reinstalling, still same error?
View 3 Replies View RelatedI have plugged my laptop into an hd-tv via but the desktop screen is slightly off to the left so the show desktop button etc is missing, the tv menu allows me to move the desktop over a bit but not quite enough, is there a way of moving the desktop position in ubuntu/software?
View 2 Replies View RelatedHow is do I move a panel from the right hand screen to the left hand screen?
View 4 Replies View Relatedhe is used to the regular netbook edition before the unity-style. The small netbookscreen is just not good for this new appbar on the left side (it's one of the old eee-pc's). None of us like that solution, and I wonder if its possible to move the bar on the bottom side of the screen so it will be a bit more Windows 7-ish?
View 6 Replies View RelatedI just upgraded to ubuntu 11.04.
Before, I could move windows between screens by pressen "Strg-Alt-Enter" (a shortcut I configured myself). Now that does not work anymore.
I remember configuring this shortcut somewhere in ccsm, but now I can not find it anymore.
I'm using Xubuntu 8.10, and Xfce 4, which a very clever friend installed for me.
Problem is, my screen display keeps shwoing windows, task bars and icons aligned so far to the left, they go off the screen.
I'm trying to find the display settings for the monitor, so I can nudge it to the right. Can't find where to click.
OS: Ubuntu 10.10 I've been trying to get my HP DeskJet D2660 printer to work for a while now, but I am having several problems that I can't seem to get around. For the driver I have 2 options. The hpijs (hplip) or the hpcups driver. Neither of them work properly.
The HPLIP driver and control software keeps telling me that the stuff I print has printed correctly, but my printer does nothing. It just sits there laughing at me whilst I get popups on my monitor telling me that the print job start and completes. I have successfully printed the print head calibration paper and aligned them as told by the HP software, but after I have done so, it just goes back to sleep. Nothing prints, not even the test page. I can't understand why it prints the calibration sheet just fine and then, afterwards, it won't print anything else but tells me everything prints fine.
The HPCUPS driver works just fine, but it has these really bad shadows on everything I print caused by incorrect alignment of the print heads. There seems to be no option of correcting this using the HPCUPS driver. So, what I have is a HPLIP driver which allows me to calibrate but won't print, and a HPCUPS driver which prints just fine, but won't allow me to calibrate. My HPLIP driver version: 3.10.6 (official from Ubuntu) I've also tried downloading and installing the latest (3.10.9), but with no luck. Prints calibration just fine, then nothing else.
I thought that alignment of 4096-byte sector Advanced Format hard drives was automatically taken care of via Gparted or Disk Utility until I bought a Hitachi HTS547575A9E384 (Travelstar 5K750) and saw that Disk Utility showed my partitions to be out of alignment. I then realized that my WD, which I had bought a few months ago, probably had its jumper set to emulate a 512-byte sector legacy drive (512e) and is probably not set to the AF setting.
Straight to the problem.
I've searched many sites, some of which suggest using fdisk (others the proprietary software of the hard drive's manufacturer). It is essential that one change the arguments prior to changing the partition table as there is no way back (yet, as far as I know) without having to move data to another drive and starting all over:
[Code]...
I've been searching around for a way to do this, but none of the solutions I find seem applicable to Lucid. Is there, like, a Terminal command to change the alignment of desktop icons?
View 3 Replies View RelatedI'm trying to do a partition alignment on my main SSD to improve SSD performance and then install Ubuntu on the SSD. I can do the alignment with no problem but when I install ubuntu the alignment is erased. Is there a way to install ubuntu without getting rid of the alignment?
View 2 Replies View RelatedRather than having my text aligned to the left side of the window, I was wondering if there's a way to align it to the center?
View 8 Replies View RelatedUpgraded to Ubuntu 11.04 which trashed my useful desktop.
Synapticed gnome and changed login preferences to ubuntu classic which basically fixed the desktop except...
If I open a program, say LibreOffice or firefox it opens correctly.
If I move the window to the second screen, it switches to fullscreen mode.
If I click on the resize button, then it opens correctly, but on the first screen
I just ghosted a hard drive containing Win7 and OS11.4 to a new WD hard drive with 4K byte alignment. WD provides a tool to align Win7 (and it apparently needed it) but reports other partition types (Ext3/4) as corrupt. Here's the question: is there a way to get 4K byte alignment in Ext3/4 after installation, or do I need to reinstall? Is there an authoritative page on this for OpenSuSE/Kubuntu?
View 9 Replies View RelatedI right clicked on the panel and clicked "New Panel". This actually did nothing the first few times. Eventually it produced a panel on the right side of the screen. When I tried to alt+drag it to move it to my other screen, it won't move. The top and bottom panel do move appropriately.
View 3 Replies View Relatedi just installed openSuse and i have very little experience with linux OS. I used this guide to setup my two monitors and they are both running ok but i have the following problem:My mouse pointer can go to the second monitor without a problem, but i can't move a window there. When i move the window to the edge of the screen it just resizes it. it doesn't move it to the next screen.
View 2 Replies View RelatedI would like to fix partition alignment on my SSD disk, and I am curious if it is possible to do it without handling data from disk and back. Is it possible with Gparted?Quote:
$ sudo fdisk -l /dev/sda
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
I want to change the alignment of GtkTreeView widget(Right-to-Left algin) i.e add columns to the rifgt of GtkTreeView and change the title of the column and its content to the rifgt of the column but I do not know how to do it
View 1 Replies View RelatedI use various hard disks in my computer. When I install a 13.1 disk, the six text consoles <Ctrl-F1> through <Ctrl-F6> are shifted to the left such that the first 2 characters in the line are off my flat panel screen. I use several different disks on this machine and all other disks are properly aligned. change the vga line in /etc/lilo.conf to vga = normal rather than vga = 773. This didn't fix the problem and resulted in another problem. If I adjust my flat panel horizontal adjustment, when I start XWindows, those screens are too far to the right. Is there a way to adjust the horizontal offset only for the consoles?
View 1 Replies View RelatedAfter upgrading my Debian from Lenny to Squeeze a few things don't work properly. Most disturbing is that after one switch from graphic screen (x, Gnome) to the virtual consoles this can be observed:
1) The virtual consoles show only a small font. It doesn't change when I use 'dpkg-reconfigure console-setup'. Otherwise everything seems to function properly, but then
2) I return to x (with Alt+F7), and if I again want to reach the virtual consoles (with Alt+String+F3, this is a laptop) the screens are persistently black; nothing works, except Alt+F7, which allows me to go back to the x-screen. In this graphic screen it is possible to use the consoles without problem.
3) I have some trouble shutting-down the computer. The screen disappears, everything goes black, but the computer goes on and does not shut down until I press the power-button, forcing the shut-down process. If I press the keys which would bring the computer to a halt through the virtual consoles, I can bring it to stop allthough the screen remains black throughout the whole process. I press: Alt+Strg+F3 to reach the consoles, there 'root + password', Enter, halt, Enter. Nothing at all appears on the screen, but after a while the computer stops.