I have two computers connected to Ubuntu One (Ubuntu 10.04 and Ubuntu 10.10 32bit both) and want to connect the third one with Ubunut 10.10 64bit and it wont connect. ubuntu-syncdaemon and ubuntu-sso-login service work in background. When I click on Connect it writes Synchronizing. for three seconds and disconnects immediately.
View 5 RepliesI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedI have just dual booted my pc to run windows 7(64 bit) and ubuntu 9.10 (64 bit). This is my FIRST time using ubunutu and i have spent the whole day trying to get my internet working but with no success. I have come so close to giving up on ubuntu but for some reason i just cant let go! When i type in ifconfig in the terminal i can see that i have an ip address assigned and i can ping my router. My motherboard came with linux drivers and i tried installing the LAN drivers with the included instructions i have got no where. I did find out that the file name in the instructions was wrong and the actual name is r8168-8.012.00. Here are the instructions-
[code]...
I'm using firefox 3.6 x86_64 with java 1.6.0_18 64 bit. I tried many times to set the (ln -s) of
[code]...
But it still doesn't work. But, when i change the java to 1.6.0_18 32 bit and then changing the reference to i386/libnpjp2.so, then it works. So the problem i have is only when using 64 bit java.
Just noticed that my kids are no longer able to play webkinz on my 64bit system (Edubuntu). Webkinz also doesn't work on my 64bit Xubuntu system. Looks like 64bit Flash is broken? -- or something is broken between Webkinz and the latest flash. Webkinz, predictably enough, works on Windows, but also works on my 32bit Linux system with the latest flash.Just wondering if any of you out there with a 64bit system could try accessing Webkinz (if you can see the Login moniker and click it, then it's working on your system).
View 9 Replies View RelatedAfter Installing Fedora 12 x86 64 on my Pavilion dv2 Laptop, everything seem working good except Broadcomn Wifi Adapter..
View 1 Replies View RelatedI just installed F13 from the Live Installer CD today. Most things are working well, but not Evince.
I can't use it at all to view images nor PDFs.
I get a "Unable to open document error":
[url]
However, eog is able to view the same file just fine...
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View Related1. a 2Gb SD works in this PC with 10.04 Kubuntu
2. a 4Gb SD does NOT - nothing happens nothing in dmesg when I insert the card, manual mount fails - can not see VFAT on it
3. this same 4Gb SD works with 9.10 netbook remix on a Lenovo laptop - auto mounts fine.
4. I do believe this card worked in this PC when it had 9.10 on it. Or XP.
So I think the card is fine, and the reader in the PC is fine, too.
how to make creative web cam working with ubuntu
View 1 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
does the android sdk work on ubuntu 64bit 10.04 becuase I try to run it in terminal, this is what i get.i cd to the tools directory and then sudo adb no file or directory sh adb: adb 1: syntax error:"(" unexpected
View 2 Replies View RelatedI'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedWhen I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedI just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
I'm trying to get skype to work on my new system. It seems to install, but trying to run it I get an error message naming a missing dependency. Searching for this with yum whatprovides and installing the result worked in one case, but for the next one, yum install <package containing missing item> returns a few errors of the form:
package <name-version>.fc12.x86_64 (which is newer than <package-version>.fc12.i686) is already installed Is there any way around this? I'd like to get skype working, but am having no luck at the moment. I'd prefer not to remove the .x86_64 packages if I can avoid it in case that breaks something else.
i just switched to Ubuntu and have run into my first problem. I am running 64 bit 10.10 and firefox 4 b12. i cannot get flash to work!
View 9 Replies View RelatedI have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View Relatediam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies View RelatedI have a built in wireless card that is capable of connecting to my network on the Wireless N protocols. However it will only work at G speeds. It shows it's connection speed at 54mbps and when i set the network at N only mode it could not even connect. How do I get it to connect at the faster wireless speeds? I need the faster speeds as I have a media server on my network. This is the hopefully relevant information you'll need from my network
sudo lshw -C network
*-network
description: Wireless interface
product: AR928X Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:08:00.0
logical name: wlan0
version: 01
serial: 00:22:5f:a6:b6:22
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=2.6.38-11-generic firmware=N/A ip=192.168.1.123 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:17 memory:d1200000-d120ffff
i have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies View RelatedI've had this same problem in Ubuntu 10.10 and earlier and have never found a solution. I forgot how to change pulse audio and look at the MXSA because that was awhile ago and I haven't messed with Linux since. What have I done to try to fix this? I turned the sound up lol. It was on mute after install.
One thing I would like to mention that I have never asked about before is, I do not have a sound card, I used on-board audio from my motherboard. Could this be a problem?
I had some issues with nvidia drivers, and removed all of the packages using
Code: Select allrm /etc/X11/xorg.conf and Code: Select allapt-get purge nvidia*
Upon reboot, I was back with nouveau drivers and proceeded to reinstall nvidia drivers according to [URL] .....
Code: Select allapt-get install nvidia-driver
apt-get install nvidia-xconfig
I can then change my refresh rate using
Code: Select allnvidia-settings
but when I hit "Save to X configuration file", I get the following output in terminal:
Code: Select allroot@debian:/home/anon# nvidia-settings
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
As a result, my nvidia preferences aren't saved across reboot.
Here are all of my sources:
Code: Select alldeb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb http://ftp.ca.debian.org/debian/ jessie non-free contrib main
deb-src http://ftp.ca.debian.org/debian/ jessie non-free contrib main
[Code] ....
System Specs:
Debian GNU/Linux 8 (jessie) 64-bit
Gnome Version 3.14.1
Processor: Intel® Core™ i7-4770K CPU @ 3.50GHz × 8
Graphics: GeForce GTX 780/PCIe/SSE2
Short of the story is I have an AMD64bit system for my 'server'. I find that there is lacking package support for ubuntu 64bit. Some apps I want to install work fine on 32bit ubuntu but not in 64bit ubuntu. More importantly the 64bit package for my ati drivers don't work, however they do on a 32bit version of ubuntu.
It would make sense to do a fresh install of ubuntu 32bit to avoid problems like this in the future. However my server has been running for years.. since ubuntu6. And it is highly customized. It would take too long to configure my server from scratch, I really want to avoid that. So I'm wondering, next time I do a dist upgrade.. say from 9.10 to 10.04. Is there a way I could trick the update manager in to upgrading to 32bit packages/kernel etc?
I had some crackling sound I thought I would remove some ALSA drivers and re-install them. Somehow, in the process, my computer rebooted itself and I am stuck with the classic "ubuntu is running in low-graphics mode".
Attempting to actually get graphics does not work. A CTRL-ALT-F7 yeilds the ubuntu loading screen with dots filling but it stays there eternally. I can however access my console login and am able to execute terminal commands.
I have tried a few things to no avail such as:
sudo apt-get update
sudp apt-get install nvidia-current
I run a Nvidia Geforce250.
I am thinking about upgrading to 64bit Ubuntu 10.10 because I have heard it's good for gaming and makes things run smoother. Also, I know it's the new thing and I'm going to have to switch eventually. Point is I don't want to loose my data with the clean install and I was wondering if I backup my current system, which is 32bit (assuming there is a backup utility, I thought I saw one) will I be able to load that on my new 64bit install?
View 8 Replies View RelatedI'm having the same issue when running F11 or F13 x86_64 and getting the flash-plugin installed just doesn't seem to work. aboutlugins in the browser does not show that the plugin has been installed.
I've followed the instructions at [URL] to no avail. This problem is common to both Firefix and Chrome.
The file referred to in this step (nswrapper_32_64.libflashplayer.so) for google chrome does not exist on the filesystem, sudo ln -s /usr/lib64/mozilla/plugins-wrapped/nswrapper_32_64.libflashplayer.so /opt/google/chrome/plugins/nswrapper_32_64.libflashplayer.so
I've ignore the sticky thread for this as I believe that this version of the adobe 64 bit plugin is vulnerable to this issue, [URL]
I've also tries the gnash-plugin and still no flash in either browser.
This TV tuner PCI card does not work with my linux. I tried it in a windows box and it worked great. I tried it with MythDora and found it non functional. Hauppage says that it should work with linux. VLC plays the out put of the tuner card just fine but cannot change channels.
Post added at 12:16 PM Previous post was at 01:48 AM this Linux box has 8 gigabytes of ram and is running x86_64 version of Linux