I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 RepliesI installed ubuntu 10.10 today and when i open the browser it doesn't show any sites. I tried
> ping www.google.com
ping : unknown host www.google.com
> telnet > open localhost
[code]....
I'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
View 2 Replies View Relatedhow to go about getting Ubuntu to receive an ad-hoc wireless ICS enabled connection. The internet connection is shared through a virtual machine running XP (with the USB wireless dongle under XP's control), on my desktop PC, in order to escape my ISP's no NAT policy. Ubuntu is on both the desktop PC (the sender), and the laptop (the receiver). The desktop and laptop also run windows 7. I managed to get my laptop Ubuntu to connect to my virtual machine XP, by setting the IP, subnet and gateway of all wireless devices, as was suggested in [URL] - I did use the Network Manager GUI, but pinging the desktop doesn't work.
Even with the IP configuration, Windows 7 on the laptop receives the internet fine. The next step is getting Ubuntu to receive. I can do any kind of configuration in a virtual machine, such as install Ubuntu. In virtual machine XP I used 192.168.0.1 with subnet 255.255.255.0 and gateway 1.1.1.1. On the laptop Ubuntu 192.168.0.2 same everything else. I understand nothing about networks. I know there is stuff I can do in the console, but how will Network Manager cope with me doing that?
I use my computer as a gateway to the internet for the rest of the house which is split into two LANs. I also have VPN's linking the office side of the LAN to a remote site. All of the PC's other than mine that should have access to the VPN works, but my PC doesnt and I firmly believe this is because I need to add a static route. ping 192.168.10.1 doesnt work but ping -I eth2 192.168.10.1 does. 192.168.10.1 is the remote router on the other side of the VPN. I've tried this route:
Code: route add -net 192.168.10.0 netmask 255.255.255.0 gw 192.168.1.1 dev eth2 192.168.1.1 is my computer... the gateway for the rest of the house/office. My computer has a quad NIC, only 3 ports are used. WAN, LAN1 and LAN2. Aside from this routing issue, I have everything working perfectly.
We have a Blade server connected to a two internal ESM Cisco switch. We want to have a active-backup configuration with bonding. We follow the documentation and we hace configured the next:
Centos 5.5
ETH0:
[root etc]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Broadcom Corporation NetXtreme II BCM5709S Gigabit Ethernet
DEVICE=eth0
[Code].....
I'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.
dig -x @8.8.8.8 130.240.133.81
gives me:
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 2917
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:
Code:
acl internals {
127.0.0.0/8;[code]..........
I don't know whether the views has messed something up. It worked before I added the views.
Once I updated to 10.04 I had some problems with my themes, but updated it and it works fine now. BUT, in firefox, 3.6.3 it looks like this:
I can only see the personas image at the tabs and the statusbar. Does anyone know how to fix this?
I am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies View RelatedIn RHEL6 root's account I have crontab job: 30 6 18 4 1 /sbin/init 6 It worked fine on the 18th of April and properly restarted my system, BUT it also restarted my OS at 6:30 on next Monday - 25th of April.
View 2 Replies View RelatedI am running ubuntu 9.10 on a dell mini 10v. I am experienced in running themes and xsplashes, but for some reason i can not successfully install pointers. I drag and drop the pointer themes to the appearance window found from System>Prefrences>Appearances. When i click customize i see that the pointers i instatlled are there, however when i choose them it doesn't work properly, if i go over text or resize a window i see the new pointers but the main pointer always stays the default white.
View 1 Replies View RelatedThe web cam on my Dell Inspiron mini 10 doesn't work properly. Cheese only takes very dark pictures but no video and the main screen stays dark all the time. Skype transmits a very dark image, too. How can that be tweaked.
Bus 001 Device 002: ID 174f:1403 Syntek Integrated Webcam
So I installed pam-script
made this script:
Code:
#!/bin/bash
RFID_AUTH_SUCCESS=0
#Read the card
tag=`'/etc/rfid/RFID-login'`
code....
Code:
sudo test
It doesn't ask for my password and instantly authenticates as root!
if I run the above posted script manually, (cd into the dir and execute it), it works fine and produces the result 1 if positive and 0 if negative.
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
I had originally followed the advice at Mauriat Miranda's Fedora Nvidia Driver Install Guide [URL] for installing nvidia's display driver on my HP Pavilion system 64 bit running Fedora 11. I had used his first method which just installs the relevant kernel module kmod-nvidia from RPMFusion. He also suggested an alternate method: obtaining Nvidia's installer NVIDIA-Linux-x86_64-185.18.36-pkg2.run and using that. I downloaded it from Nvidia, but I didn't run it.
I recently lost X. This had happened previously after a kernel upgrade, and I just used grub to boot an earlier kernel to recover X, and then installed the upgraded kernel module to fix the problem. But this time, being deeply involved in something else, I panicked slightly, and, using dumb terminal mode I ran the Nvidia installer. It asked me to make various choices and in response to my answers, it decided to compile a new kernel module. This recovered X, but I then compounded things by installing the updated kmod-nvidia.
I realized afterwards that using both methods might create some conflicts, but X seemed to run properly. (I can tell because graphics in the program Maple doesn't work properly with the default drivers provided by Fedora 11.) Since then, when I restart nvidia, I get.
[Code]....
I can't seem to get ping to work on my home computer. I actually have two separate installations of Ubuntu 9.10. One is at home, sharing space with Windows Vista (dual-boot) on a Dell Inspiron 1525. The other is at workusing Sun VirtualBox on a Windows XP host. ping works quite well at work, through VirtualBox. For example, Code:ping linuxcommand.org always gets 0% packet loss. However, when I do the same thing at home, I always get 100% packet loss.
View 1 Replies View RelatedWhen I ping a destination IP address, it responds. However, when I try to telnet or ftp or sftp to the same IP address, it does not connect.
I do not know the physical location of the machine.
After a while of sifting through other threads, I decided none of them could solve my problem. My problem: when I click the Firefox icon on the quick launch sidebar in 11.04, it just blinks and Firefox never opens.
I tried reinstalling Firefox, removing and reinstalling the packages from the Synaptic Package Manager but that's about it. When I type "Firefox" into the command line it says something along the lines of "/home/apw5020/firefox: firefox not found". When I go into usr/bin/firefox and run the shell script directly it will run however. Is the shortcut path non existent or just incorrect? Any idea how I can fix it?
When I run it in Classic, Firefox doesn't work either. By the way, I used some workaround to run Firefox 4 before 11.04 was released involving PPAs.
Firefox 3.0.7Dual 2.8 Pentium Processors 2 gig ramPC Linux2009 OSHas anyone been able to get Downloadhelper to work in Linux ? I have tried in Mint, Mephis and PC Linux and it doesn't want to work. I have got it to work in Windoz but not Linux
View 5 Replies View RelatedIt seems that there is no way for me to install java plugin in firefox 3.6. I've already read some threads about similar problems but none of the solutions that worked for other people work for me. So I decided to open a new thread. Following instructions of other threads, I uninstalled all java packages and installed again just the three that you can see below, but nothing changed.
Opensuse 11.1
KDE 4.4.1
Firefox 3.6
Code:
# rpm --query --all '*java*'
java-1_6_0-sun-1.6.0.u7-20.4
java-1_6_0-sun-plugin-1.6.0.u7-20.4
timezone-java-2008h-2.16
Updated to Firefox 3.6.6 Clicking on any link on a page does not work. Same in 3.6.7 Hardy Heron
View 3 Replies View RelatedWhen I start firefox the mouse seems captured by it.I can use the mouse inside the firefox screen (change tabs, use menu, select/paste) but not anywhere else. Even if a popup appears (site wants to register a cookie) then I can only use the keyboard to "ok" it. alt-tab to another window is not possible.Using the mouse in the gome-panel won't work.I can get the mouse pointer anywhere on the screen but mouse clicks don't seem to register. I've had this problem before on 10.04 and the only thing that worked then was to create a new useraccount (a lot of hassle).
edit: The window manager also won't react to the mouse so closing the firefox window is not possible using the windowmanager buttons(X - 0)It's also not limited to Firefox,after I closed firefox via it's menu and then started a gnome-terminal the mouse was caught in that. After closing the gnome-terminal and restarting firefox it degraded even further in that the mouse would'nt even work in the window itself anymore.Only a reboor would reset the problem.
firefox 5 is almost my favourite browser. but there is the following bug: if you configure your Tabs on top (i think its the default setting) you can't access the url-adress-form with the hotkey F6. As workaround you can use F6 and TAB key - but that isn't very comfortable.....
View 3 Replies View RelatedI'm using firefox 3.6 x86_64 with java 1.6.0_18 64 bit. I tried many times to set the (ln -s) of
[code]...
But it still doesn't work. But, when i change the java to 1.6.0_18 32 bit and then changing the reference to i386/libnpjp2.so, then it works. So the problem i have is only when using 64 bit java.
I am trying to use a ZTE AC2726 USB EVDO Modem on openSuSE Linux 11.3 Gnome to connect to the internet. I have edited the /etc/wvdial.conf file as follows:
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = .....
When I execute the wvdial command on the terminal the following error appears
joey-suse:~ # wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK .....
The /etc/resolv.conf file has the DNS addresses as below
nameserver 212.49.70.22
nameserver 212.49.70.23
How do I resolve this and connect to the internet?
I'm having this problem that's driving me nuts.Basically I've set up 2 virtual DNS servers.1. Master on fictive domain "domain.xx". 2.ster of fictive domain "sub.domain.xx"NS 1 delegated sub. zone-space to the DNS 2.Everything works except for reverse lookup on sub-domain.For instance. 172.16.0.101 should resolve to my fictive mail.sub.domain.xxIf I try to resolve it with 'host 172.16.0.101' from domain.xx I get:Host 101.0.16.172.in-addr.arpa not found: 2(SERVFAIL)If I do the same from the actual sub.domain.xx I get:Host 101.0.16.172.in-addr.arpa. not found: 3(NXDOMAIN).
If I, on the other hand, try to resolve a hostname both from domain.xx or sub.domain.xx with 'host mail.sub.domain.xx' I get the proper address as the answer: 172.16.0.101I've delegated the in-addr.arpa space to sub.domain.xx dns-server according to RFC 2317 specification, at least I think...Please note this is a virtual network address 172.16.0.0/24Here are the excerpts of the in-arpa-files on both domain.xx and the sub.domain.xx server.
Code:
$TTL 12h
$ORIGIN 0.16.172.IN-ADDR.ARPA.
[code]...
I run an centos server. From the console I can ping google.com and get a reply. But when I ping another address say xyz.com, the IP address is resolved (11.22.33.44) but there is no reply. In the same network in our office from my desktop I ping [URL] and there is a reply.I turned of the firewall but still the same problem.
View 9 Replies View Related(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
View 2 Replies View RelatedMozilla 3.6.8, Linux Arch. It doesn't matter what minimum font size I set, Firefox still doesn't increase small font on pages...
View 6 Replies View RelatedOn Ubuntu 10.04, Synaptic indicates that current version {10.0.32.18-1(now) for AdobeFlash plugin} is latest but websites appear to indicate that latest version is 10.0.45-1. Synaptic Upgrade button is grayed and I am stuck! All came about by accessing following site: [URL]... Had to revert to Firefox on XP (!) to see diagram. Is there a more current (latest) version for Firefox under Ubuntu 10.04 and if so, how do I go about installing it? I tried to download and got a "Status: Error: Conflicts with installed package 'flashplugin installer'" when I clicked on the .deb file.
View 6 Replies View Related