Ubuntu Networking :: How To Add A Wireless Module
May 8, 2010
I have a Toshiba Satellite 505D, and because of ACPI issues I had to compile a custom kernel. [URL] Everything works except the wireless is broken. My network card is a RTL8101E/RTL8102E. The driver is r8169. The new kernel does not load the wireless driver at boot up.At the terminal, I typed sudo modprobe r8169 to load the driver. Then I typed dmesg | grep -i r8169, and I got back the response
bob@bob-desktop:~$ lsmod | grep -i r8169
r8169 39454 0
mii 5237 1 r8169
This, I think, tells me the driver is there. However, when I type iwconfig, I get the response "no wireless connection"
View 7 Replies
ADVERTISEMENT
May 1, 2010
what is name of modules in kernel for wireless and lan driver ?
View 1 Replies
View Related
Apr 22, 2010
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies
View Related
Sep 2, 2010
I was going to buy a TP-link wireless router (802.11b/g/n) but while I was reading the consumer's reviews I saw some people were saying that they couldn't make it work with ubuntu. So, I'm starting wandering if there is somewhere any compatibility list? I mean if for instance TP-link or D-link would work with broadcom's chip. I would like to use my laptop's built-in wireless module which is HP Broadcom corp. BCM4306 802.11b/g. My laptop is a HP Pavilion zv6000.
View 2 Replies
View Related
Jul 24, 2011
This is solved go to page #2 for instructionshis link will help show my netbook wireless situation:http://wontek.com/laptops/laptops/hp...-3025dx-reviewA quick read of the article says I need to compile a module to get the wireless to work... ??? Now I'm lost... can anyone point me in the right direction to compile a module?? and what exactly would that be doing???I believe I need this wireless driver: Ralink 2011 802.11 b/g/n WiFi Adaptercomputer: HP dm 1-3025dxOS: Ubuntu 10.04 Netbook
View 9 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Sep 11, 2011
Just wanted to ask what is the easiest way to get the wistron_btns module to run at startup. I have read a bit about it in some other forums, but I wanted to hear it on the SUSE forums to be certain I get it right the first time.
View 1 Replies
View Related
Apr 24, 2010
I updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :
Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module
View 1 Replies
View Related
Jul 24, 2010
I have an Acer 1551-4755 notebook with AR5B93 wireless chipset. ath9k is loaded and my card is detected as Atheros AR928X PCI-Express wireless network adapter. However, the ath9k driver is only allowing me to connect at 802.11g speed in spite of the fact that my WRT310N loaded with DD-WRT is in mixed mode. I am able to connect at wireless N speed with my D-Link DWA-130 usb dongle, but this is a rather backward solution. Is there a way to work around this issue, ie an updated ath9k or other madwifi driver? I would hate to resort to ndiswrapper for a natively supported chipset. I am using openSuSE 11.3 for the first time, long time Fedora user.
View 1 Replies
View Related
Jan 18, 2011
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
View 9 Replies
View Related
May 20, 2010
I'm needing to have the acer-wmi module running at startup for my wireless card. In ubuntu this is located at /etc/modules and I was wondering where the same file is within Fedora
View 2 Replies
View Related
Jan 25, 2011
A little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same)
GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
View 8 Replies
View Related
Mar 11, 2011
On my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
View 6 Replies
View Related
Mar 21, 2011
Using tips provided in the "Sticky" posts, I have identified my wireless device -- BCM4322 -- and installed the necessary firmware and drivers. The device appears in Network Manager until system reboot, at which time the "ssd" driver module is loaded instead. After each boot I must execute the following commands to remove ssd and load the Broadcom driver:
rmmod ssb
modprobe lib80211
modprobe wl
The Broadcom README file provides directions to load the correct module automatically, but the commands appear to be incompatible with openSUSE 11.4. I'm happy to provide additional detail if needed
View 7 Replies
View Related
Jan 28, 2010
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
View 1 Replies
View Related
Jun 8, 2010
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
View 2 Replies
View Related
Aug 3, 2010
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
View 1 Replies
View Related
Feb 14, 2011
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
View 1 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Aug 23, 2010
I got a engineering sample wifi card - Intel wimax 5350. This card work well with kernel 2.6.28-15-generic and earlier kernels.
However after kernel 2.6.28-16 , this card no longer support by newer kernel.
the error is "Unsupported EEPROM VER=0x21b < 0x21e CALIB=0x4 < 0x4"
I knew the reason is that card is a Engineering sample .. it should not get support in newer version kernels.
What i try to think is that "is it possible to replace old wifi module into the new wifi module in new kernel " and the system can also get works !?
Below is message of dmesg.
------------------ Kernel version : vmlinuz-2.6.28-15-generic
[ 11.683885] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 11.683888] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[Code]....
View 8 Replies
View Related
Dec 23, 2010
I have a problem with 3G module un2420.Once loaded system lsusb does not show Qualcomm module.What is a problem?My system is Ubuntu 10.10 with Kernel 2.6.35-24.
View 9 Replies
View Related
Jun 17, 2010
I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?
View 2 Replies
View Related
Jun 26, 2010
I have a WS- something or other by gigabyte, it has the "ralink rt2860" chipset according to lspci.
It works well the only problem is in kismet or airodump-ng the power always shows as 0.
In the kismet.conf i had to set the source to rt2500, it does not seem to like rt2860 or rt2x00.
In airodump-ng it always says "chipset: ralink 2560pci" and "driver:rt2500"
Is there any way i can use the rt2x00 drivers, would they allow for more things ?
Whats funny is that network manager can see the signal strenght of all the sources.
View 2 Replies
View Related
Jul 9, 2010
Got notebook HP 6530b with Intel 5100AGN PCIe WiFi module in and desktop ubuntu 10.04 from [URL].
Can i make this one works any way exclude ndiswrapper.
lshw -c network
http://img695.imageshack.us/img695/1...eenshot2th.jpg
lspci
http://img819.imageshack.us/img819/1...reenshothy.jpg
uname -r
2.6.32-23-generic
View 1 Replies
View Related
May 22, 2011
where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
View 9 Replies
View Related
Jul 10, 2009
I have an Intel 4965 Wireless NIC and from time to time it crashes. I have been looking in my log and found these messages code...
View 1 Replies
View Related
