Ubuntu Networking :: Get PCtel Modem Driver For Kernel 2.6.28?

Jan 30, 2010

a link to a website where I can get PCtel modem driver for kernel 2.6.28

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Install Modem Driver For The Alcatel X200 USB Modem?

Mar 23, 2011

find and install modem driver for the Alcatel X200 USB modem?

I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.

View 1 Replies View Related

Networking :: HSF Modem Driver Will NOT Work With Ubuntu 8.04

Mar 18, 2010

I have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??

I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.

View 2 Replies View Related

Ubuntu Networking :: Find A Driver For A Sprint 3G/4G Modem?

Jan 3, 2010

I need to find a driver for a Sprint 3G/4G modem. I am running 9.04.

Sprint lists this as a U300 but the actual part is a Franklin Wireless FW300DOWMX.

lsusb shows this as ID 16d8:6002 CMOTECH Co., Ltd. and ID 0409:005a NEC Corp. HighSpeed Hub

so my box can see the part.

If I can get just the 3G working that would help a lot. I would be happy to do beta, even alpha, testing.

View 9 Replies View Related

Ubuntu Networking :: Installing Modem Intel536EP Driver On 10.04.1?

Oct 22, 2010

i follow this guide:https://help.ubuntu.com/community/Di...wto/Intel536EP

then i find my modem:
$ lspci | grep 536EP
Quote:

[code]....

View 1 Replies View Related

Ubuntu Networking :: Netcomm NB100 Adsl Pci Modem Driver?

Oct 10, 2010

I want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?

View 2 Replies View Related

Networking :: How To Write A Device Driver For Virtual Modem

Nov 25, 2009

i have some basic knowledge about device drivers.can any one tell how to write drivers for virtual modem, Actually my project is to implement communication between the two PCs by using two virtual modems. so for that i need to write the code for the virtual modem which it should understand all the AT commands exactly as physical modem and it should send/receive call and SMS.

View 1 Replies View Related

Ubuntu Networking :: IBurst Modem Driver & 10.04 LTS LL Pppoeconf Required After Reboot?

Nov 9, 2010

I'm a Linux noob an I am really desperate for some top, top, top assistance. Been battling a while now with my iBurst USB modem driver and hope there is someone out there that can help? I have been through umpteen forums and threads and tried literally everything I read, but to no avail. I also realize there aren't many Ubuntu users that use the iBurst modem, but I am appealing to the few out there that do.

I have installed the open source ibriver-2.6.31 for my iBurst USB modem. Initially all went well with fast connection etc., connection everytime I boot, until... I started updates of 10.04 LTS, that is when I became aware, from the forums, that a re-install of the driver is required after every package update due to no "package management" in the iBdriver. what a pain in the proverbial to say the least!

Anyways.. now I am the stage where the driver is always installed, but...all of a sudden, I need to run pppoeconf and set up the driver after each boot to get connected!!!! If I can't find a solution it will force me back to Windoze7 which I dread to do! Can a script be written to pppoeconf (rp-pppoeconf.iso is loaded I think) automatically during boot perhaps?

So any top Linux hacker or "notsonoobasIam" user out there with a iBurst modem and similar pains & mis-fortunate experience please share your ideas and thoughts to correct this problem permanently for me please? (I should maybe mention that the other day I performed the "Grub2 Profile" exercise to try and speed up the boot time, this does not perhaps have something to do with the fact that I need to reconfigure in pppoeconf after every boot does it? I doubt it)

View 9 Replies View Related

Ubuntu Networking :: Wireless And Lan Driver Kernel Module?

May 1, 2010

what is name of modules in kernel for wireless and lan driver ?

View 1 Replies View Related

Ubuntu Networking :: Huawei E1552 Modem To Connect To The Internet, Everything Was Going Well When Suddenly Modem Stopped Working?

Feb 8, 2010

i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug

HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to

[code].....

View 4 Replies View Related

Ubuntu Networking :: Wireless Driver Broken After Kernel Update

Oct 1, 2010

I just upgraded the kernel on my Ubuntu laptop from 2.6.32-24-generic to 2.6.32-25-generic (using the update manager under gnome). After the update, the wireless network controller shows up as UNCLAIMED when I do lshw -C network.When I try to install the driver with the commands sudo modprobe lib80211 sudo insmod wl.ko

i get this error message: insmod: error inserting 'wl.ko': -1 Invalid module format

I have compiled the driver using the 2.6.32-24 kernel. Do I have to re-compile with the new kernel?I'm a unix user, but not a kernel hacker, so I'm wondering if I will run into problems every time I get a kernel update? Or is this problem an exception?

View 1 Replies View Related

Ubuntu Networking :: Kernel Update Broke The Network Driver

Dec 23, 2010

I managed to get my Linksys AE1000 USB wireless adapter to work on Unbuntu 10.04 LTS.but recently I updated the kernel to 2.6.32-26 and when i rebooted I logged on to see my wireless connection was not working.even worse, I can't fn the links i had that showed me how to install it in the first place, its about the fact that the new kernel uses a different usb setup(probably incorrect, let me know it its incorrect). its an issue that the hacked driver isnt compatible with the new kernel release, how can i revert to the older version that it did work on? i'm using a RALinkTech driver [URL]

View 3 Replies View Related

Ubuntu Networking :: Kernel Headers In Order To Install NIC Driver?

Jul 8, 2011

I am running Ubuntu 11.04 with a Dlink DGE-530T NIC. My browsing in Ubuntu on ALL browsers is horribly slow. It works perfectly fine on windows and other PCs on the LAN. So I know for sure my router and my internet line is fine.I figured it could be a problem with my NIC drivers and decided to install the drivers from the CD. (All this while it was running on the default drivers that ship with Ubuntu). I'm trying to install the sk98lin drivers and my understanding of the kernel so far is still very weak. When I try to run the install.sh script it gives me an error saying :

Code:
Create tmp dir (/tmp/Sk98IknhDHEiLKnkWUSoYMTLi) [ OK ]
Check user id (0) [ OK ]
Check kernel version (2.6.38-8-generic) [ OK ]
Check kernel symbol file (/proc/kallsyms) [ OK ]
Check kernel type (SMP) [ OK ]
Check number of CPUs (2)

[Code]...

But the installation script is still not able to find it. I tried searching a few threads on google but wasn't able to make too much sense of whats going on because of my lack of understanding of the linux kernel.

View 9 Replies View Related

Ubuntu Networking :: RTL8187L Updated Driver For Kernel 2.6.32/2.6.31 For ALFA AWUS036H

Jan 5, 2010

i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.

To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........

View 5 Replies View Related

Ubuntu Networking :: 2.6.35-24-generic Kernel Update Breaks Broadcom STA Driver

Dec 29, 2010

I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:

[Code]....

View 3 Replies View Related

Networking :: Reinstalling Driver With Ndiswrapper After Kernel Upgrade?

Mar 10, 2011

Anyone know of a good guide to use reinstalling a wireless driver using ndiswrapper after a kernel updates? I seem to have to do it a lot, and I'm looking for some good directions.

View 6 Replies View Related

Fedora Networking :: Kernel 2.6.35.10-74.fc14.x86_64, E1000e Driver 1.0.2-k4 Still Had Bugs?

Feb 11, 2011

I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]

View 6 Replies View Related

Ubuntu :: Need Driver For USB Modem

Dec 3, 2008

I have Ubuntu on my laptop and use a Zoom USB modem. I can only use the modem when running Windows and really hate to do that. Does anyone know where I might find a driver to run my modem on Ubuntu?

View 1 Replies View Related

Ubuntu Installation :: ATI Driver And New Kernel 2.6.35 Kernel - No Longer Work

Nov 24, 2010

With the recent upgrade kernel, my ATI driver can no longer work. After upgrading to the new kernel, upon reboot I would get stuck at the "checking battery status" and can't boot into kubuntu.

I'm running Kubuntu 10.10 64 on intel i5 with radeon hd 4870.

So I thought I messed something up since I was fooling around with conky script the day before. I did a clean install of kubuntu 10.10 64 and reset all my settings and my files. At this point, everything works smoothly and I can reboot multiple times without a problem.

I proceeded to install the Radeon catalyst driver following the documentation, which worked perfectly for me on the previous kernel. After rebooting, I can no longer get pass the "checking battery state" black screen. I had to boot into safe book, uninstall all fglrx and also delete xorg.conf to be able to boot back in normally.

View 5 Replies View Related

Fedora :: Driver For USB Modem ?

Nov 24, 2009

How does Fedora recognise USB modem ? I have a USB Modem that works on Windows but It does not work on Fedora 10 linux. It is for Reliance Netconnect (India) and USB modem is HUAWEI EC 1260

I tried editing the wvdial.conf in /etc/wvdial.conf as

But it does not seem to work

I even tried changing the Modem = /dev/ttyUSB0 to Modem = /dev/ttyUSB2 but I get the message as --> Cannot open /dev/ttyUSB0: No such file or directory

View 3 Replies View Related

Debian :: Trying To Install The Driver For Usb-modem

Apr 16, 2010

I have a brand-x usb-modem and much to my suprise it had a .deb package to install the driver.The only problem is it fails during the "make" and I dont know enough about C to be able to fix the error. I'm not even sure what information is needed to help me with this chore.

View 4 Replies View Related

Fedora :: Nvidia 8600m Gt Driver Fc12 - Kernel Automatically Will Change To Be A Pae Kernel?

Jul 4, 2010

my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??

View 10 Replies View Related

Red Hat :: Install Ethernet Adapter Driver - Not Finding Kernel-devel Or Kernel-headers

Aug 30, 2010

I'm attempting to install the driver for my atheros AR8131 PCI-E Gigabit Ethernet adapter (in my Lenovo laptop) on my newly installed RHEL5 system (it's not currently being recognized).

I tried using: 'make install' but hit an error "Makefile:61: *** Linux kernel source not found."

After this, I tried: 'sudo yum install kernel-devel kernel-headers'

To rectify this, but hit this error "No package kernel-devel available" (and the same for the headers). What should I do?

View 5 Replies View Related

Programming :: Netlink Sockets In Kernel And Ethernet Driver - Kernel Crash

Aug 31, 2010

I write the network driver. Transmission of packets in user space I do through netlink socket`s. In user space there is a handling of packets and their transmission on other device (however, it isn't important).

Problem in that any time, packets through the driver in system, and is reverse, are transferred normally. But then there comes the moment when the kernel crash. If to look in syslog it seems to me that comes deadlock. Also I think that it is related with netlink socket`s.

I can't find the information on that anywhere how correctly to use netlink socket`s in kernel space. Can at you will any a reason into the account of synchronization of sockets and the driver in kernel space?

I can give the driver code if it is necessary.

View 2 Replies View Related

Ubuntu :: Edimax 7781Un Wireless USB Modem Driver Compilation

Mar 31, 2011

I recently bought the Edimax 7781Un wireless modem specifically because it works with Linux. The OS does recognise the device and tries to connect to the router, however it connects and has the two semi-circles going round then it eventually disconnects. I thought it was my wireless device with little signal strength therefore I bought this one. However this one connected once for 20 seconds, 89% strength and disconnects. I booted up win7 and it works fine, so I have put it down to the driver or the OS.

Trying to compile the driver, I am up to the make step after following instruction here. I type make, it does a few things and errors a fair few things, the last line ending in [make] *** [LINUX] Error 2

Another possibility (I think) for this connection problem could be my AMP installation, however I have neither apache, php or mysql running and I still have the problem.I read somewhere that make requires more files, is this true? And if it is, where can I get it without an internet connection on my linuxbox? (I am currently using my brothers w7 computer).

View 3 Replies View Related

Hardware :: Egprs Modem Driver Installation

Jun 4, 2009

I've a Popular P300U Egprs Modem. I can't install this on my UBUNTU 9.04 Desktop Version. My modem company doesn't give any driver support on ubuntu.In Windows XP its install USB to UART Bridge Controllers on Com Port 3. Its Silicon Lab driver. It also install Virtual Serial Port.In terminal window if i command "lsusb" then it show a device connected which name is "Cygnal". It also shows its vendor & product id.

View 4 Replies View Related

General :: Driver For Aztech UM9100 56k Usb Modem?

Jan 21, 2010

I have recently installed Ubuntu and I am very new to the Linux platform. I am trying to install the USB modem but cannot find a driver and don't understand all the tech jargon.

View 1 Replies View Related

Debian Installation :: Kernel Liquorix And Nvidia Driver / Error Doesn't Found The Kernel Source Tree?

Oct 1, 2010

I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.

I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.

View 1 Replies View Related

Hardware :: Install The Huawei E1750 Usb Modem Driver?

Sep 24, 2010

setup and configure a Huawei E1750 modem on mandriva!

View 5 Replies View Related

OpenSUSE Hardware :: Finding Driver For Clear Wimax USB Modem?

Jan 29, 2010

I just got Clear mobile Wimax. It uses a Motorola USB stick modem that comes with a Windows driver. I didn't see a Linux driver and was wondering if I could expect to see one for openSuse moblin for netbooks?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved