OpenSUSE Install :: After Kernel Update No Ext4 Support At Boot Time
Apr 20, 2010
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
Some times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
I was wondering if there's a way for me to get real-time kernel support on regular Ubuntu 9.10 through some sort of update. I know Ubuntu Studio has a real-time kernel, but I'd prefer not to use it. I'm a fan of the original Ubuntu.
Due to a power outage, my EXT4 file systems (which contain /usr and /opt) no longer mount at boot-up. They are, however, seen by disk utility in Knoppix, so I assume the data is still there and that it's just matter of making a connection to it.
I am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.
How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2
Playback device is default Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 96 to 1048576 Period size range from 32 to 349526 Using max buffer size 1048576
I have tried countless things and am at a complete loss. I'm pretty new to Ubuntu and Linux in general, just so everyone knows. Here's my problem: I can run the 10.10 install disc as a Live CD and have perfectly functional internet. However, when I install into a clean ext4 partition, I have zero internet support. I have Googled the heck out of this problem, too.I've tried tinkering with IPv6 settings, I've tried scouring my BIOS for anything relating to "Wake-on-LAN" (It's enabled in Windows 7, by the way, which is what I dual-boot into), and several other network-related ideas I've read online. None have had any effectEDIT: Additional details: ethernet worked like a champ in 10.04, and in 10.10 when I did an upgrade instead of a clean install. I had this same ethernet problem in a clean 11.04 install (which also worked in Live CD form), too, which is why I tried 10.04 to begin with.
When using make menuconfig - under Device Drivers --> Character Devices --> there should be an option with the label "Enhanced Real Time Clock Support" (CONFIG_JS_RTC).
The problem is that this option seems to only show up while using the menu method when other options are either enabled or disabled and I've entirely forgotten what should be what. I swear fingered it out once.
This is on an older computer (P4) so HPET is no good.
You would think that disabling the HPET option would enable the RTC option but that does not appear to be the case.
I understand I can just add the option to the .config file and avoid this hassle but I'm very interested to know how to make this work.
To show my appreciation I will do something nice for you such as call you a nice name or tell you that you are pretty (or ugly if that's what you prefer).
I'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
I installed the new 2.6.34.4-0.1 security update earlier today. Now, the login screen no longer responds to my keyboard. In particular, I cannot type my password to log in. If I reboot into failsafe mode, the keyboard works and I can log in.
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf: Code: Section "Device" BoardName "ATI Radeon HD 3200 Graphics" Driver "fglrx" Identifier "Device[0]" Option "XAANoOffscreenPixmaps" "true" Option "Capabilities" "0x00000000" Option "OpenGLOverlay" "off" Option "FSAAScale" "0" Option "FSAAEnable" "off" Option "VideoOverlay" "on" Screen 0 VendorName "ATI" Rolling back to kernel 2.6.27.37 fixed the problem.
After the lastest update 11.2 also suffers from the problem already reported here for 11.3. I am lucky to have two linux partitions and was actualy able to boot into the second partition. From this second system I could repair this or at least a quick-n-dirty fallback to be able to boot.
1. Copied the 2.6.21.12-0.2 version for initrd and vmlinuz from /boot to /first_partition/boot 2. Copied the /first_partition/boot/grub/menu.lst.old to /first_partition/boot/grub/menu.lst to reset to the old menu.
After boot the system could start but modules were not loaded.
3. copied /lib/modules/2.6.31.12-0.2-desktop from the second partition to the first. 4. The same for /usr/src/linux-2.6.31.12-0.2*
Now my system will boot and start modules such as network and sound. Still, was this correct? I don't know for sure if there are some issues that I haven't discovered yet. And obviously, what will happen with future updates (either kernel or other)?
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
i'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
After upgrading kernel, system (AMD 780G)refuses to start in graphic mode. Computer services running fine, but there's nothing or some trash on screen when X started. And no way how to get out except restarting or shutting down from remote computer.
Reinstalling, unistalling ATI driver doesn't help. Also manipulations with xorg.conf (install, safe etc previous file versions)doesn't help.
Sax2 detects videocard correctly, but result is same regardless which resolution@Hz is specified.
In logfiles I just can find this
Jan 19 04:12:55 www kdm_config[4226]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc Jan 19 04:12:55 www kdm[4225]: X server died during startup Jan 19 04:12:55 www kdm[4225]: X server for display :0 cannot be started, session disabled
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
Since the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
I updated the Kernel to 2.6.34.4-0.1-desktop. First problem was in order to do that I had to uninstall ndiswrapper. Now I have multiple entries in the bootloader, the default, the desktop, and the openSUSE 11.3 -2.6.34-12. Since I am new to linux what am I suppose to do with all those entries?
my friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback) 2. sound card driver is missing (nVidia MCP79) 3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
I'm planning to migrate from ubuntu server to open suse serverI'm testing the migration in a virtual machine and I'm having problems with mdadmEvery time Open suse boots I need to run mdadm --assemble /dev/md0 and activate the volume group vgchange -ay VGNAMEDuring the boot time boot.md and mdadmd are running but (startup scripts only scan) I believe mdmad is not running because needs to be assemble every time.
Are there any easy special tricks to speed up the boot time?Coming from Linux Mint (GNOME), I could get to the Desktop from cold in less than 25 secs.Now in openSuse 11.3 (KDE4.5) it takes more than twice that.Is this a function of KDE or have Ubuntu done something that openSuse hasn't to speed up the boot?
I was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?
Here's what to do right after applying the latest kernel security patch (2.6.34.7-0.4) to get the ATI driver back to work. Do not reboot yet make sure the update installed the headers and sources for kernel 2.6.34.7-0.4: rpm -qa | grep 2.6.34.7-0.4 should print the files in red on a 64bit system:
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
