I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
Just completed the upgrade to 10.04 from 8.04, and ironing out the wrinkles. Since the upgrade, I'm not able to establish a VPN connection to my institute (a problem since outgoing mail REQUIRES a VPN connection) The pull down menu shows the connection as an option, but clicking on it brings up a separate window that simply says "The VPN connection CfA failed because the VPN Service failed to start." Never had this issue under Hardy, so not sure what's going on. Under "Configure VPN" the settings look the same as they always did.
View 7 Replies View RelatedI configured vpn successfully as per [URL]
when I start it i get a message "The VPN connection bestfreevpn.com failed because the vpn service failed to start'
What needs to be done. My net is working normal. Just wanted to try VPN.
I have CentOS 5.2 just installed and massively updated with yum -update command. Than I tried to configure firewall. After changes via system_config_securitylevel_tui (open ssh, http, ftp, and 3306:TCP ports) iptables service can't start with message
> /sbin/service iptables start
Flushing firewall rules: [OK]
Setting chains to policy ACCEPT: mangle filter nat [OK]
Unloading iptables modules: [OK]
Applying iptables firewall rules: iptables-restore v1.3.5: Couldn't load match `TCP':/lib64/iptables/libipt_TCP.so: cannot open shared object file: No such file or directory
Error occurred at line: 18
Try `iptables-restore -h' or 'iptables-restore --help' for more information.
[FAILED]
I erased the iptables service and installed it again with yum. How can I make this service work?
i am using RHEL5 at VirtualBox,at the time of installation i did create two partition one for / and another for swap.Now my /var directory is taking too much space and i decided to create a new partition with required size and mount that partition to /var.Now http service wont start and i did not reboot yet.
View 8 Replies View RelatedI am using RHEL 5.0. I am having problem with postgresql service it is not starting, not stopping, not restarting.
View 5 Replies View RelatedI have written a init.d script but, when do '/sbin/service scriptd start' it does not indicate OK or FAILEDWhat could I be missing?
View 2 Replies View RelatedI meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies View RelatedI'm trying to get VPN working so that I can browse "from the UK". I got myself a free one hour trial but it's no good, because I can't get it to work!
I added the network using the network manager. I put 'uk.hideipvpn.com' in "gateway". I left "NT domain" blank as I didn't know what it meant.
It says "The VPN connection 'VPN connection 1' failed. I found the following at /var/log/messages:
Code:
I setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:
Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204
[Code]....
I recently setup ubuntu 9.10 in my desktop..I don't know whether the connection is dialup or not. I used the connection with cable connection. I have got the following information from my ISP:
User name: n372_asad_go@brisksys.net
service name: brisknb
password: 16251521
A while ago i attempted to use ubuntu as my default operating system and it failed, i could not get the shares to work properly and i gave up. Yes i know, may be i should have kept going.
Any way, my problem is, Im attempting to use ubuntu 11.04 now, and this time i am realy keen on going through with this, however... for some reason when i connect my wired connection cable ubuntu keeps failing to connect. this is with the auto eth0.
Can any one help me with this problem? This is one of the major things that i will need to do if i want to switch over to ubuntu.
So I got Ubuntu 9.10 on my laptop working really neat and wanted to upgrade my desktop to 9.10 as well. So I reinstalled Ubuntu there and now I can't connect to my network anymore....
I have a usb wireless adapter (currently Sitecom as I bought a new one today to hopefully fix it, but ended up at exactly the same problem as with my old adapter). The network manager I'm using now is Wicd since some topics I was looking through were about malfunctioning GNOME network-manager (which I removed) and suggested to try this. The GNOME network-manager kept prompting to insert my WEP network key which was a correct one. When I removed all security from the network it didn't prompt anything anymore but just failed to connect. The Wicd network manager is so nice to tell me that it cannot obtain the IP address however, so I suspect that this is my main issue... but I have no idea what I can do about this? Tried using a static IP and then I get the message "Connection failed: Could not contact the wireless access point."
I feel powerless as my knowledge here is just lacking..
Dual boot Vista Basic and Ubuntu 10.04 on low spec PC. I can connect to the wireless when I am next to it. I move to the room where the computer is normally used and I lose connection. I can still see it but it fails to establish a connection. Okay, sounds like it's just too far way but when I re-boot and use Vista, it works fine (1 or 2 bars, but it works). Is this a driver issue? Anything I can do apart from move my wireless router?
View 9 Replies View RelatedI use Nokia N900 under T-Mobile as a broadband modem. It is connected via USB. There was no connection problems under 10.04 or 10.10. Now I have installed Ubuntu 11.04, and I cannot connect any more.
Here are the log messages that I get when trying to connect:
Code:
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> Activation (ttyACM0) starting connection 'T-Mobile Internet'
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> (ttyACM0): device state change: 3 -> 4 (reason 0)
[Code]....
I need to connect to my company through a Cisco VPN. The Cisco client fails to build so I thought of using vpnc. I used Network manager (NetworkManager-vpnc is installed). However after setting everything up and then logging in, I get the 'VPN Connection Failed' message.
View 14 Replies View RelatedI have installed CentOS 5.5 final on VM ware 7.0 workstation.... and I was trying to install and configure bind9.. it installed alright but it refused to start because named.conf is not in the /etc/ directory. I have copied the template for /usr/share/doc/named/* to (/etc/ and /var/named/) the appropriate directory but it still fails but on it does not gives me any error message. Oh... least I forgot I was trying to configure it as a cache only server for now.
View 1 Replies View RelatedI'm having a problem with Subversion. When I try an "svn up" it gives me this error message:
SSL handshake failed: Secure connection truncated
I'm running Ubuntu 10/4 but I also had this problem with 9/10. Does anyone know what this error message means? It appears to be an SSL problem but it's not clear to me what exactly the problem is. I do not have this problem with svn on my other office computer, nor my home computer. FYI, I'm running subversion on the Regina project.
The full error message is this:
Code:
svn up
svn: OPTIONS of '[URL]': SSL handshake failed: Secure connection truncated [URL]. Although I don't think there's anything specific to Regina about this svn problem, as I mentioned, I can "svn up" from home, or from my other office computer.
I installed Ubuntu 10.4 side by side with my Vista. This is on a PC I leave on permanently and use as a sort of Sever, so Security and Network connection are VERY important on this device. I use it for documents and IP PBX (telephone system). I currently use Vista and 3CX, but I plan to roll it over to Unbuntu full time once its up and runnng correctly - I will just need to change the Grub2 conf priority. After install, all was fine and I managed to make many changes to settings, apps and updates, but I have noticed in the past week when going in to make further changes the network has suddenly stopped working! According to Network Manager and the icon on the panel it is connected and I can not see anything obvious that is not correct. I tried doing a PING (192.168.1.1) from Network Manager to the main router, but it failed. I know that there is nothing wrong with the network nor the card or PC it all sits on. It's working now with Vista and my other machines. It must be a config some-where.
View 9 Replies View RelatedI keep getting this error message:
The VPN connection '<insert name here>' failed because of invalid VPN secrets
I have Ubuntu 10.10 installed on a Dell Latitude D600. It's a fresh brand new install. After I installed all the updates, I proceeded to install network-manager-vpnc. Then, I imported .pcf files so that I can connect to the office VPN,but it gives me the error message above.I have gone to ~/.gnome2/keyrings and renewed everything.Tried moving them away, and then back again. Created a new keyring. Nothing.
I've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following:
Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise
Changing the SSID, broadcasting to ON, changing the SSID name
I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says
Problems occurred during the network connectivity test
This can be caused by invalid network config or problems w/ your momde / router
Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!
I have an eeePC 1000HG, basically identical to the 1000H but with an integrated 3G modem.
Mostly the netbook works fine, the only big problem is the 3G modem will not connect to the network.I added a "Mobile Broadband" network connection from the network icon at the top right.The OS has detected a modem, it reports as a "HUAWEI Technology HUAWEI Mobile" in the mobile broadband network setup wizard, and as the follwing with lsusb;
Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem I don't know whether that's correct - I can't find information anywhere which definitively specifies which model of modem is in there.... I did find some reference to it being a Huawei E770V, but I don't know if that's true or not. I have installed the modeswitch packages from Synaptic, which made no apparent difference.
I followed the wizard and picked Australia as a location and Virgin Mobile as a provider and Mobile Broadband as a billing plan.When I try and connect I just get an error saying the connection failed.The modem worked out of the box under eeebuntu 3.
system: centos 5.5 Kernel 2.6.18-194.el5 freshly installed. bind is configured in chroot environment out of the box. placed named.conf in /var/named/chroot/etc and my zone files in /var/named/chroot/var/named.
[Code]...
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
I have an Acer one with this peculiar operating system which I don't understand. I have had it a couple of years and it has hardly been used. It has always worked well and connected up to my WiFi until today when after it has booted I get 'internal fault. Hal has failed to initiate' and the Wifi connection does not work. I am perfectly familiar with Windows but I haven't a clue with this one. Have found a post on this forum relating to this fault but I am afraid it was double Dutch to me. I don't even know how to access it's inner system let along enter any commands.
View 4 Replies View RelatedI am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
whenever i try to update or install a new software this problem shows up Resolving ftp.3drealms.com... failed: Name or service not known. wget: unable to resolve host address `ftp.3drealms.com' --2010-05-23 12:20:14-- ftp://ftp.3drealms.com/pub/share/1rott13.zip => `/usr/share/games/rott/1rott13.zip'
View 3 Replies View RelatedI have installed opensuse 11.2 64 bit on my pc. But I have some troubles with nepomuk and desktop search. I, in system settings pannel, have tried to enable nepomuk and strigi. But strigi show me this error message:
Code: Strigi service inizialization failed, maybe for an installation error. This is strange becouse during my installation I have not seen error messages....