Ubuntu Networking :: SSL Handshake Failed - Secure Connection Truncated
Jun 16, 2010
I'm having a problem with Subversion. When I try an "svn up" it gives me this error message:
SSL handshake failed: Secure connection truncated
I'm running Ubuntu 10/4 but I also had this problem with 9/10. Does anyone know what this error message means? It appears to be an SSL problem but it's not clear to me what exactly the problem is. I do not have this problem with svn on my other office computer, nor my home computer. FYI, I'm running subversion on the Regina project.
The full error message is this:
Code:
svn up
svn: OPTIONS of '[URL]': SSL handshake failed: Secure connection truncated [URL]. Although I don't think there's anything specific to Regina about this svn problem, as I mentioned, I can "svn up" from home, or from my other office computer.
View 9 Replies
ADVERTISEMENT
Mar 23, 2010
I followed the tutorial found here [URL] but when I try to access [URL] I get the following:
Code:
Secure Connection Failed
An error occurred during a connection to www.mydomain.com.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
Not sure what I might have done wrong... I have retraced all of my steps and I don't believe I missed anything.
View 2 Replies
View Related
Jan 3, 2010
My server is suddenly getting giving the following error: Quote: Secure Connection Failed An error occurred during a connection to inenergy.dvrdns.org. SSL received a record that exceeded the maximum permissible length. * The page you are trying to view can not be shown because the authenticity of the received data could not be verified. * Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. I had been trying to configure the server to do secure logins (before Christmas) , but I don't think I had completed the configuration and I'm not sure how to reset it so that I can start again.
View 1 Replies
View Related
Mar 21, 2011
I'm trying to connect to a webdav server with very poor luck. My preference would be to mount it to my file system, but simply connecting with Cadaver would be fine too.
I've tried:
Code:
mparks@mparks:~$ sudo mount -t davfs https://<host>:<port>/<path> /media/webdrives/<mount-dir>
[sudo] password for mparks:
Please enter the username to authenticate with server
[Code]....
View 2 Replies
View Related
May 10, 2011
I've installed (Slackware 12.2) Cisco AnyConnect Secure Mobility Client for vpn connection (it is OpenSSL based app). When I'm trying to connect using this agent I get the error
Code: AnyConnect cannot confirm it is connected to your secure gateway.The local network may not be trustworthy.Please try another network.I don't know much about vpn. Any help are very welcomed.
View 1 Replies
View Related
Oct 14, 2010
Several of our servers that do not have direct exposure to the Internet have the following entry appearing in their respective /var/log/secure files.Are these messages harmless? If so, is there any way or reason to suppress their appearing in the log files?
View 1 Replies
View Related
Oct 21, 2010
I use a secure connection to reach company network from outside. There's a client application "Juniper network", which creates the secured tunnel to a company network. However, the connection never survives more than 8 seconds, when it goes disconnected with the message "Route monitor alarm". From my recent search for a solution I've found that this error is caused by a change in a route table, which violates a connection policy.
"This disconnect is typically triggered by a change in the routing table of the client machine, the change is such that the split tunnel policies defined by the administrator will be violated" - from [URL]
This is how a routing table looks before, during and after the connection attempt:
Code:
[vs@dilbert network-scripts]$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
xxx.xxx.xxx.0 10.64.64.64 255.255.255.255 UGH 0 0 0 ppp0
[Code].....
View 4 Replies
View Related
Feb 10, 2011
I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]
From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt
Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:
[Code]...
So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.
View 5 Replies
View Related
Oct 19, 2010
I have OpenVPN set up on my server at home to allow me into my home network when I'm away from home. When I set it up, I tested it using my friend's wifi so I know it works on a local geographic scale.Now I'm away from home, the TLS handshake fails to complete within 60 seconds. I assume it's timing out, as I can tracepath to the server on port 1194 successfully.From reading the OpenVPN documentation, I thought that adding "tls-timeout=120" to the client's config file would double the time allowed,but the handshake still fails with the same error message:
Code:
Tue Oct 19 10:45:17 2010 us=930956 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Tue Oct 19 10:45:17 2010 us=931012 TLS Error: TLS handshake failed
Why is the option not being read correctly from the file - does it need to be in the server's config file also?
View 1 Replies
View Related
Dec 12, 2010
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
View 1 Replies
View Related
Nov 16, 2010
I'm trying to get VPN working so that I can browse "from the UK". I got myself a free one hour trial but it's no good, because I can't get it to work!
I added the network using the network manager. I put 'uk.hideipvpn.com' in "gateway". I left "NT domain" blank as I didn't know what it meant.
It says "The VPN connection 'VPN connection 1' failed. I found the following at /var/log/messages:
Code:
View 5 Replies
View Related
Mar 12, 2010
I setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:
Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204
[Code]....
View 7 Replies
View Related
Jun 18, 2010
I recently setup ubuntu 9.10 in my desktop..I don't know whether the connection is dialup or not. I used the connection with cable connection. I have got the following information from my ISP:
User name: n372_asad_go@brisksys.net
service name: brisknb
password: 16251521
View 1 Replies
View Related
May 4, 2011
A while ago i attempted to use ubuntu as my default operating system and it failed, i could not get the shares to work properly and i gave up. Yes i know, may be i should have kept going.
Any way, my problem is, Im attempting to use ubuntu 11.04 now, and this time i am realy keen on going through with this, however... for some reason when i connect my wired connection cable ubuntu keeps failing to connect. this is with the auto eth0.
Can any one help me with this problem? This is one of the major things that i will need to do if i want to switch over to ubuntu.
View 1 Replies
View Related
Apr 24, 2010
So I got Ubuntu 9.10 on my laptop working really neat and wanted to upgrade my desktop to 9.10 as well. So I reinstalled Ubuntu there and now I can't connect to my network anymore....
I have a usb wireless adapter (currently Sitecom as I bought a new one today to hopefully fix it, but ended up at exactly the same problem as with my old adapter). The network manager I'm using now is Wicd since some topics I was looking through were about malfunctioning GNOME network-manager (which I removed) and suggested to try this. The GNOME network-manager kept prompting to insert my WEP network key which was a correct one. When I removed all security from the network it didn't prompt anything anymore but just failed to connect. The Wicd network manager is so nice to tell me that it cannot obtain the IP address however, so I suspect that this is my main issue... but I have no idea what I can do about this? Tried using a static IP and then I get the message "Connection failed: Could not contact the wireless access point."
I feel powerless as my knowledge here is just lacking..
View 4 Replies
View Related
May 3, 2010
Dual boot Vista Basic and Ubuntu 10.04 on low spec PC. I can connect to the wireless when I am next to it. I move to the room where the computer is normally used and I lose connection. I can still see it but it fails to establish a connection. Okay, sounds like it's just too far way but when I re-boot and use Vista, it works fine (1 or 2 bars, but it works). Is this a driver issue? Anything I can do apart from move my wireless router?
View 9 Replies
View Related
May 30, 2011
I use Nokia N900 under T-Mobile as a broadband modem. It is connected via USB. There was no connection problems under 10.04 or 10.10. Now I have installed Ubuntu 11.04, and I cannot connect any more.
Here are the log messages that I get when trying to connect:
Code:
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> Activation (ttyACM0) starting connection 'T-Mobile Internet'
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> (ttyACM0): device state change: 3 -> 4 (reason 0)
[Code]....
View 9 Replies
View Related
Jul 4, 2010
I installed Ubuntu 10.4 side by side with my Vista. This is on a PC I leave on permanently and use as a sort of Sever, so Security and Network connection are VERY important on this device. I use it for documents and IP PBX (telephone system). I currently use Vista and 3CX, but I plan to roll it over to Unbuntu full time once its up and runnng correctly - I will just need to change the Grub2 conf priority. After install, all was fine and I managed to make many changes to settings, apps and updates, but I have noticed in the past week when going in to make further changes the network has suddenly stopped working! According to Network Manager and the icon on the panel it is connected and I can not see anything obvious that is not correct. I tried doing a PING (192.168.1.1) from Network Manager to the main router, but it failed. I know that there is nothing wrong with the network nor the card or PC it all sits on. It's working now with Vista and my other machines. It must be a config some-where.
View 9 Replies
View Related
Jan 19, 2011
I keep getting this error message:
The VPN connection '<insert name here>' failed because of invalid VPN secrets
I have Ubuntu 10.10 installed on a Dell Latitude D600. It's a fresh brand new install. After I installed all the updates, I proceeded to install network-manager-vpnc. Then, I imported .pcf files so that I can connect to the office VPN,but it gives me the error message above.I have gone to ~/.gnome2/keyrings and renewed everything.Tried moving them away, and then back again. Created a new keyring. Nothing.
View 7 Replies
View Related
Jan 22, 2011
I need to connect to my company through a Cisco VPN. The Cisco client fails to build so I thought of using vpnc. I used Network manager (NetworkManager-vpnc is installed). However after setting everything up and then logging in, I get the 'VPN Connection Failed' message.
View 14 Replies
View Related
May 1, 2010
I have an eeePC 1000HG, basically identical to the 1000H but with an integrated 3G modem.
Mostly the netbook works fine, the only big problem is the 3G modem will not connect to the network.I added a "Mobile Broadband" network connection from the network icon at the top right.The OS has detected a modem, it reports as a "HUAWEI Technology HUAWEI Mobile" in the mobile broadband network setup wizard, and as the follwing with lsusb;
Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem I don't know whether that's correct - I can't find information anywhere which definitively specifies which model of modem is in there.... I did find some reference to it being a Huawei E770V, but I don't know if that's true or not. I have installed the modeswitch packages from Synaptic, which made no apparent difference.
I followed the wizard and picked Australia as a location and Virgin Mobile as a provider and Mobile Broadband as a billing plan.When I try and connect I just get an error saying the connection failed.The modem worked out of the box under eeebuntu 3.
View 9 Replies
View Related
Jan 6, 2011
I've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following:
Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise
Changing the SSID, broadcasting to ON, changing the SSID name
I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says
Problems occurred during the network connectivity test
This can be caused by invalid network config or problems w/ your momde / router
Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!
View 1 Replies
View Related
Jul 6, 2010
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
View 3 Replies
View Related
Jan 27, 2011
I have an Acer one with this peculiar operating system which I don't understand. I have had it a couple of years and it has hardly been used. It has always worked well and connected up to my WiFi until today when after it has booted I get 'internal fault. Hal has failed to initiate' and the Wifi connection does not work. I am perfectly familiar with Windows but I haven't a clue with this one. Have found a post on this forum relating to this fault but I am afraid it was double Dutch to me. I don't even know how to access it's inner system let along enter any commands.
View 4 Replies
View Related
Aug 3, 2010
I'm writing a script that tars, bzips, and encrypts a set of files to my GPG key and then (ideally) uploads the files to a backup directory on my school's web server. I want to run it daily as a cron job. Problem is, the web server only allows connections with scp and sftp.
Neither program allows specifying a password as a switch. I want to run it as a cron job, so I won't necessarily be present to type the password, and I'd like to just be able to specify the password in the script.
"Ah ha!" you're thinking. "He needs to generate a keypair and set up ssh to not require a password!" And I've found tutorials on the web that show me how to do just that. Problem there is that they all require me to install software and/or access files outside my home directory on the remote machine.
I have zero access to anything other than my own home directory on the remote machine. None. Nada. Zip. I can't install software, access files in /var or /etc, or find out anything about running processes. The local IT priesthood won't give me any information about what's running on the machine or how I can connect to it (and has made a point of telling me that they don't care for Linux users and I should stop asking questions).
I'd really like to to just be able to specify my password in the script. I understand that scripts are really just text files and that anyone who can get at my desktop computer can read them with a text editor and that this would reveal my password and blah blah blah, but I'm willing to trade that particular risk for the convenience of not having to be awake and monitoring the computer when the cron job is running.
Is there any way to specify the password in the script itself? I'd be happy using either sftp or scp (I've used them both successfully from the terminal to transfer files to this machine).
View 2 Replies
View Related
Jun 21, 2011
I want to secure my internet connection by hiding my ip with another ip so I can log to my server with 2 ips . and when someone is tracing the "fake" ip it wont affect me .
View 5 Replies
View Related
Jul 6, 2011
Is my ssl connection secure if I'm going through a proxy. Is it possible to craft a malicious proxy to steal/crack authentication?
View 2 Replies
View Related
Nov 11, 2009
I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
View 2 Replies
View Related
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
View Related
May 6, 2010
Since important information like pass-phrases is sent via a Bluetooth link, I wonder how secure this is. I think it must be quite a weak point.
View 3 Replies
View Related
