Fedora Networking :: Eth0 Connection Failed - Device Not Managed By NetworkManager
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
ADVERTISEMENT
Nov 3, 2010
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies
View Related
Apr 26, 2011
I installed Linux 6, configured the network during the install with a static IP and when I do an ifconfig command it doesn't show an IP Address. Can't get out to the Internet because I don't think I have an IP/Address. I restarted network, went into preferences-network connections and everything looks fine, ran system-config-network and everything looks fine. When I do an ipup ifcfg-eth0 and get the message "Connection activation failed: Device not managed by NetworkManager". Is there an option I failed to load at install or I need to install now?
View 2 Replies
View Related
Jan 14, 2011
when I first installed it on my IBM thinkpad, the eth0 was working correctly. I had someone try to install the network card for me, and something was changed to where now the wired connection is displaying "device not managed".
View 2 Replies
View Related
Aug 25, 2010
I'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behavior.I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc.I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'.I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working?I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick?
View 6 Replies
View Related
Apr 23, 2011
I'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behaviour. I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc. I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'. I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working? I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick? It seems the only thing this applet is useful for is connecting to a wireless network.....and only with dhcp !!
View 1 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Feb 24, 2011
I'm running Ubuntu 10.04.2 LTS and from time to time eth0 connection is lost.
Looking at syslog (below), if its a hardware (network card) problem or a software bug?
syslog file:
View 4 Replies
View Related
Aug 27, 2010
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed.I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies
View Related
Oct 30, 2010
I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
View 14 Replies
View Related
May 14, 2010
My wireless connection has been giving me some problems, so I decided to try a wired connection directly to the router. However, when I try to do that, it doesn't work. When I click the network manager icon, it says that the wired device is not managed.
ifconfig gives this:
Link encap:Ethernet HWaddr 00:13:d3:dd:12:79
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d3ff:fedd:1279/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I ran sudo dhclient to try release and renew my IP, in case that was the problem. It released and renewed successfully, but still didn't connect to the Internet.
View 2 Replies
View Related
Sep 21, 2009
I thought configuring a vpn would be a piece of cake, but it seems I'm missing something.
I'm attempting to create a vpn (pptp) using the networkmanager (0.7.1). I enter the gateway (I assume thats the server I'm trying to connect to) and my login information. What is the NT Domain?
When I try to connect it only tells me after a while that it failed to do so. How can I find the information on what went wrong in the process?
View 2 Replies
View Related
May 25, 2011
I'm using Fedora 15 with KDE, and in the NetworkManager settings I can't set my Ethernet connection to be a System Connection. The box is greyed out. I assume only root can enable this option, but GUI apps typically ask for an administrator password. I did add my user to the "Administrator" group when I installed and I can use sudo and all that.
View 2 Replies
View Related
Feb 28, 2010
Seems everytime I upgrade wireless quites working.
Anyways, here's the info:-Acer Aspire One AOA150-1997
Quote:
kevin@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code]...
I think that's all that would be needed to help diagnose the issue. I'm kinda new to linux, and this is primarily a music machine.
View 6 Replies
View Related
Apr 27, 2010
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
View 9 Replies
View Related
Mar 29, 2010
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
View 2 Replies
View Related
Dec 24, 2009
After some wonderful days with fedora with my CDMA mobile internet connection (the only connection where I live) NetworkManager can't connect anymore.
I tried to delete the settings and rewrite them without success.
I have A Novatel Ovation U720 CDMA/EDVO USB modem.
I can connect with wnXP and kubuntu, but can't connect with fedora anymore.
I wish to make the definitive move from kubuntu to fedora... but I should wait.
View 2 Replies
View Related
Apr 30, 2010
After the use of pppoeconf, the network manager does not recognise neither the wired nor the wireless connection anymore. (It nicely did it before that) I tried to replace the etc/network manager folder with that of a different machine. Still the same. What else can I do to reset Network Manager ?
View 1 Replies
View Related
Sep 21, 2010
I'm having trouble getting onto the internet with ubuntu 9.04. I have just moved house and have just got the internet set up here (typing this on windows laptop with wireless). My ubuntu desktop is plugged in to the network, but in the top right hand corner when I click on the network icon I get: "Wired network device not managed"
In my old house I had a static IP. Is this anything to do with it?
View 9 Replies
View Related
Jun 13, 2009
The symptom is that NetworkManager repeatedly ask for password to connect to my AP.My AP is secured with WPA-PKI. The problem even happens with Fedora 11 live cd if I'm not quickly configure wireless connection using NetworkManager right after Fedora completes booting up. It means if I promptly configure wireless connection, i'm still able to access Internet. Same thing happens for the first boot of Fedora from hdd. For the second boot or when I dont quickly configure wireless connection when system finished booting up, NetworkManger repeatedly asks for password for AP.
I did try several approaches posted in this forum but problem still persisted. Some of approaches I tried are:
[Code]....
View 2 Replies
View Related
Apr 17, 2010
Currently my setup is a road runner cable modem connected to a desktop via a ethernet cable. The networkmanager lists "Broadcom BCM440-BO 100BaseTX" device not managed. I've turned off the power to both the cable modem and the computer. I then turned on the power to the cable modem and then the computer. If I try the firefox browser, it can not connect to the internet.
View 3 Replies
View Related
Jul 16, 2011
I am trying to sort out some issues following an upgrade from F12.
I have eth0 as the connection I want to use. Prior to the upgrade, this connection was enabled and active at boot.
Now, for some reason after the upgrade it has to be manually enabled at every boot - even though when I go the Network tool, Ethernet Device > General tab - "Activate device when computer starts" is checked.
At every boot time it is inactive.
In all the ifcft-eth0 files, the ONBOOT parameter is set to "yes".
View 12 Replies
View Related
Dec 26, 2010
i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies
View Related
Jul 25, 2010
Code...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
View 1 Replies
View Related
Oct 15, 2010
I have a ZTE 3G USB modem (MF645).
When I plug it, 5 devices appear: /dev/ttyUSB[0-4]. The modem device is /dev/ttyUSB2, and I can successfully connect wvdial on it.
NetworkManager detects the modem, however, it tries to connect to /dev/ttyUSB1 instead, and fails.
How does NM decides which device to connect to?
Is it possible to instruct it to connect to a specific device?
View 1 Replies
View Related
Jun 4, 2011
As I reported in this bug:[URL].. root is not able to start an openvpn-connection via the "nmcli"-command to control NetworkManager, whereas my user does not run in any problems with this command. My error output when starting as root is as follows:
Code:
# nmcli con up id "my-openvpn"
Active connection state: unknown
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/5
state: VPN connecting (need authentication) (2)
Error: Connection activation failed: no valid VPN secrets.
Does anybody know what to do about this strange behaviour? The vpn-secret seems to be stored in the gnome-keyring and in the /etc/NetworkManager/system-connections/my-openvpn simultaneously. But root cannot access any of these. Why this is important? I'm trying to set up a dispatcher-script to automatically start openvpn on eth-connection. but this does throw the exact error from above (no valid vpn secrets..).
[Code]...
View 1 Replies
View Related
Nov 18, 2010
I've looked today on my logs /var/log/message and I find device eth0 entered promiscuous mode I don't remember putting eth0 in promiscuous mode I'm connected to the net thru a router how do i turn that off ?
View 1 Replies
View Related
Dec 14, 2010
I have to do a project on network security.For that i have to capture the packets from the device. I installed libpcap tool in ubuntu. If I give ifconfig -a it lists out eth0, wlan0, lo. I am able to connect to the internet via eth0. But when I give
#include <stdio.h>
#include <pcap.h>
int main()
{
char *dev, errbuf[PCAP_ERRBUF_SIZE];
[Code]...
It says device is null. I'm not able to run sniffex.c program also. All I want to do is to capture the live network level packets and analyse them.
View 2 Replies
View Related
Jan 31, 2011
While i am configuring network setting on backtrack4. i was running my backtrack on vmware workstation and NAT is bridged to physical mem like it was said on the tutorial that watched. i typed ifconfig eth0 up, and hit enter, as well as dhclient eth0 up, but resulted in different output. it says "no such device" is written and i would like to configre this problem.
View 2 Replies
View Related
May 5, 2010
My network name is eth2 it was changed by some reason and now i got these errors... i installed, reinstalled, re re installed, tried to run the asistant but no luck :/
Code:
* Stopping the Firestarter firewall...
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
[code]....
View 1 Replies
View Related
