I have installed opensuse 11.2 64 bit on my pc. But I have some troubles with nepomuk and desktop search. I, in system settings pannel, have tried to enable nepomuk and strigi. But strigi show me this error message:
Code: Strigi service inizialization failed, maybe for an installation error. This is strange becouse during my installation I have not seen error messages....
So I installed the Unison synch software with sudo apt-get install unison-gtk. When I set up the two directories for synchronization it looks like this: $ unison ssh:\SERVER\pathpath /var/www/path/path/path
I am getting this error in terminal Uncaught exception Gtk.Error("GtkMain.init: initialization failed ml_gtk_init: initialization failed") Fatal error: exception Util.Fatal("Error in getLogch: /home/path/.unison/unison.log: No such file or directory"
I have a RTL81817 chipset in my USB wireless network adapter. I installed the driver, but it still didn't work.
In Yast->Hardware->Hardware Information->USB the following details are displayed:
RTL8187B_WLAN_Adapter
-Bus: USB
-Class(spec): unclassified device
-Class: unclassified device
-Device Identifier: 229767
[Code].....
how one can use the nepomuk/strigi file indexing service. I started up dolphin, and typed the search string in the upper right corner, and clicked Search. The search result is a long list of files. The one I need is a PDF file. When I select this file, on the right hand side there is the following info: 'Is part of: 15.2 GiB Removable Media' which is clearly wrong, since this file resides in my home directory, which is on a 200 GiB partition. If I double-click this file to open in okular, I get an error message:
Code: Could not open nepomuksearch:/nepomuk_3A_2Fres_...... Reason: Please insert the removable medium "15.2 GiB Removable Media" to access this file I guess this is some old result from nepomuk's cache (in the meantime I have had to repartition my hard disk, and restore my home directory from a backup copy on an external hard drive - but this has been many months ago, so I would expect that nepomuk have had the time to recognize this)
I receive following error when trying to enable strigi. "strigi service failed to initialize, most likely due to installation problem" I have searched internet, obviously not good enough, and i have found nothing. Nothing that would work. i have tried installing openjdk-devel as suggested, soprano. And still nothing. I have same problems on both boxes running Fedora 12.
View 1 Replies View RelatedI upgraded to Ubuntu 9.10 from 9.04; 2 days ago using an alternaate CD. Everything went fine and after the install I ran System Update and got all the latest updates too. Now when I boot the PC to Ubuntu, after a while it pops up a dialog box, saying:
Code:
Ubuntu is running in low graphics mode, you may need to update your configuration to solve this:
(EE)Intel(0):I380 DMA Initialization Failed!
The screen is also in a frame, it never fits the monitor screen completely, however I can change the screen resolutions, it displays
Code:
Unknown
in System->Pref.->Display
There is also the problem with compiz, I'm unable to turn on the Visual effects. I do not have any propriety Grpahic Driver Cards, just the default provided by Intel.
Xorg.conf
Code:
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package.
# Note that some configuration settings that could be done previously in this file, now are automatically configured by the server and settings here are ignored.
# If you have edited this file but would like it to be automatically updated again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier"Configured Video Device"
EndSection .....
OS RedHat 5.5, Server Model: HP Proliant DL 380 G7
We swapped our 10Gig NIC Cards (Qlogic) with Emulex NIC cards NC550SFP. The server was rebooted and I get the following message:
dmesg | grep -i "emulex"
be2net 0000:18:00.0: Emulex OneConnect 10Gbps NIC initialization failed
be2net 0000:18:00.1: Emulex OneConnect 10Gbps NIC initialization failed
Earlier when there was Qlogic, we configured the two NIC cards for eth2 and eth3.
Now, in order for this server to show up these NICs, I used ifcfg -a and configured ifcfg-eth2 and ifcfg-eth3 and did a service network reload. The interface came up and all worked good.
But after the Qlogic was replaced with the Emulex and when I perform ifcfg -a, I don't see eth2 and eth3 or neither they are shown as some other names such as __tmp. I can't find the MAC addressess that are associated with them.
Is there any way that we can initialize these NIC cards and make them available in ifcfg -a so that, I can edit the mac ids of these NICs and configre ifcfg-eth2 and ifcfg-eth3.
I'm trying to install Debian 5.03 from the netinstall on a usb flash disk. When it gets to the network initialization step, it fails and cannot get an IP from DHCP. Manual configuration does not work either. Out of desperation I installed windows to see if the network device was broken (this is a new motherboard), however it works fine without drivers even. Invoking lspci shows that it is a Realtek RTL8111/8168B PCI Express Gigabit Etherent Controller (revision ff)
View 4 Replies View RelatedI'm working on a kickstart install to automate a lot of monotony doing installs. When i use the kickstart install i get an error on boot saying "File based locking initialization failed" "no volume groups found". Then it proceeds to boot up with no issues and appears to work just fine. Below is the section of my ks.cfg for creating the partitions: %include /tmp/partition.cfg is included where the partition info usually occurs. The user is prompted in the pre script for how large they would like the partitions to be and then the script below creates the included file with partition info
[code]...
I just upgrade to KDE 4.3 and it is great release, one problem I have found with it is that The Strigi Desktop File Indexer does not want to start. The error that I get is "Strigi service failed to initialize, most likely due to an installation problem.", does anyone here know if Strigi logs things like this and were? "We must plan for freedom, and not only for security, if for no other reason than only freedom can make security more secure."
View 9 Replies View RelatedI have Strigi and Nepomuk indexing files (OpenSuse 11.3), but I do not knowhow to use the results of these tasks.
View 6 Replies View RelatedI've installed KDE 4.6.2 (from Index of /repositories/KDE:/Release:/46/openSUSE_11.4) and I've noticed that Strigi fails to work. In my System Settings I have?message that Strigi haven't started, although it should (the checkbox to strart Srtigi is active). The process virtuoso-t is constantly suspended in the system.
OS: OpenSuse 11.4 64 bit. Some bugs are resolved in KDE 4.6.2 compared to 4.6.00, so I would like to stay with KDE 4.6.2.
I've had opensuse 11.2 for a long time and I've never seen this nepomuk thing run before. But all of a sudden on startup just now, I got a message that it was running. Why? What is this and should I be worried? Why have I never seen it before?
View 2 Replies View RelatedI got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
Hi when i run the updater or through yast i get the following
There was an error in the repository initialization.
[URL] Valid metadata not found at specified URL(s)History:- [|] Repository type can't be determined.
looking through my repositories list it seems it has added one from anything i have installed. What are the necessary ones?
Im trying to "ssh -X" my university server for accessing cadence, but i get this:
HTML Code:
*Warning* X Window Display Initialization Failure
*Warning* (DISPLAY "<not defined>")
Apparantly i need to assign it my machine IP e.g like:
HTML Code: setenv DISPLAY machine:0.0
But unfortunately it still doesnt solve my problem. All it does is stop printing this warning message as a result.
The /etc/profile said that i should do that in /etc/profile.local.I create /etc/profile.local, set the aliases, then i reboot.Now i've got a broken bash enviroment. Prompt has gone, ls colors gone, useful aliases (md=mkdir) gone.I've got this prompt: 'bash-4.0$' instead of the 'username@hostname:actual dir'.The root account has got the same errors, so i think i broke something system-wide.I removed the profile.local but the problem stays.What should i do to regain the standard bash enviroment?
View 4 Replies View Related'm new to linux as of today, and I'm really liking it so far, but I've already run into issues. When I open up the software manager in openSUSE 11.3 (KDE), I receive the following warning message:
There was an error in the repository initialization.'repo-update': [URL].. Repository is not cached From there, I'm unable to install anything (I want to install WICD because KNetworkManager is not working for me). How do I resolve this issue?
trying to install broadcom-wl-kmp-desktop and broadcom-wl-5.100.82.38-7 for my wireless driver. The yast2 keep saying error. Don't know why. I installed opensue11.3 with not problem. Missing packman when i zypper repos command.Do anybody know why.I am very new to linux.I always been window user.
View 6 Replies View RelatedWhenever I open software repositories or management via YaST I get an error message about a Repository initialization error From Software Repositories
[Code]...
I just installed 11.4 and was adding a new repository which I entered incorrectly. Yast2 complained and did not add it to the repository list. Now when I run Yast2 Software Management.
I get the following error message...
"There was an error in the repository initialization.
Error refreshing service Packman 11.4 (vaval.com - Islam Resources and Information. This website is for sale!
Parse error: repoindex.xml[3] Opening and ending tag mismatch: meta line 2 and noscript"
Since this line does not show up in my repository list I cannot remove it. How do I edit the data file directly and where is it located?
I am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification.
Tried to change DVD reader but does not change the result. Runs speedy up to that step.
Earlier I have no problems when I install opensuse. After installation the network runs and I can run online updating in yast for the system. But since a few version it doesn't work after installation and I don't know why. I think maybe the errors could happen because I have no
internet connection. Today I install 11.4 and get this message when I want to run online updates in yast.
There is an error in the repository initialization
'repo-update' [URL]
[repo-update URL]
Repository is not cached
I think this problem stars with 11.1 or 11.2.
Just completed the upgrade to 10.04 from 8.04, and ironing out the wrinkles. Since the upgrade, I'm not able to establish a VPN connection to my institute (a problem since outgoing mail REQUIRES a VPN connection) The pull down menu shows the connection as an option, but clicking on it brings up a separate window that simply says "The VPN connection CfA failed because the VPN Service failed to start." Never had this issue under Hardy, so not sure what's going on. Under "Configure VPN" the settings look the same as they always did.
View 7 Replies View RelatedI configured vpn successfully as per [URL]
when I start it i get a message "The VPN connection bestfreevpn.com failed because the vpn service failed to start'
What needs to be done. My net is working normal. Just wanted to try VPN.
i am using RHEL5 at VirtualBox,at the time of installation i did create two partition one for / and another for swap.Now my /var directory is taking too much space and i decided to create a new partition with required size and mount that partition to /var.Now http service wont start and i did not reboot yet.
View 8 Replies View RelatedF15 x86_64
I can start this from the command line and it shows no errors.
httpd -t --- syntax ok.
no entry in the httpd error logs.
chkconfig reports it as on.
service --status-all shows this --
httpd.service - LSB: start and stop Apache HTTP Server
Loaded: loaded (/etc/rc.d/init.d/httpd)
Active: failed since Wed, 01 Jun 2011 07:06:18 +0100; 58min ago
Process: 1152 ExecStart=/etc/rc.d/init.d/httpd start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/httpd.service
After a reinstall I finally caught this in /var/log/messages
systemd[1]: Unit httpd.service entered failed state
The httpd.service file does not exist on the system. Where can I get a copy?
whenever i try to update or install a new software this problem shows up Resolving ftp.3drealms.com... failed: Name or service not known. wget: unable to resolve host address `ftp.3drealms.com' --2010-05-23 12:20:14-- ftp://ftp.3drealms.com/pub/share/1rott13.zip => `/usr/share/games/rott/1rott13.zip'
View 3 Replies View RelatedI am using RHEL 5.0. I am having problem with postgresql service it is not starting, not stopping, not restarting.
View 5 Replies View RelatedI am running a debian squeeze server, and have autofs 5.0.4 installed. One of my scripts (autofs executable files) is trying to mount some of my LAN hosts.The host mount fine at start, but when unmounted automatically, it will not mount again. (At least unless I wait for 2-3 minutes).The problem is, maybe, that I get these messages in the log:
add_host_addrs: hostname lookup failed: Name or service not known
mount(nfs): no hosts available
failed to mount {myshare}
If I wait a couple of minutes, the share is mounting fine, but that is not an option.The mount command issued by my script is mounting just fine on the command line after all these error messages, but autofs seems to have a problem with it anyhow.I have searched all over the web trying to get a reasonable explanation to any of these messages without luck.I don't think that I can upgrade automount, since this is an embedded device (SheevaPlug), so what is my options?