Ubuntu Networking :: 'internal Fault. Hal Has Failed To Initiate' And The Wifi Connection Does Not Work
Jan 27, 2011
I have an Acer one with this peculiar operating system which I don't understand. I have had it a couple of years and it has hardly been used. It has always worked well and connected up to my WiFi until today when after it has booted I get 'internal fault. Hal has failed to initiate' and the Wifi connection does not work. I am perfectly familiar with Windows but I haven't a clue with this one. Have found a post on this forum relating to this fault but I am afraid it was double Dutch to me. I don't even know how to access it's inner system let along enter any commands.
View 4 Replies
ADVERTISEMENT
Jan 3, 2011
I am working on ubuntu (Xubuntos) using VMware virtual machine. when I enter apt-get update it gives following error;
Code:
xubuntos@xubuntos-tinyos:~$ sudo apt-get update
Code:
Err http://tinyos.stanford.edu edgy Release.gpg
Cannot initiate the connection to 3127:80 (0.0.12.55). - connect (22 Invalid argument)
Err http://tinyos.stanford.edu edgy/main Translation-en_US
[Code]...
View 2 Replies
View Related
Dec 18, 2010
I've got a wireless problem on my laptop (dell inspiron 6400).I don't know when exactly and why, but every time I watch a video on ..... or allostreaming, after a while (a few minutes), my wireless disconnect and it's impossible to get back any connexion. The only solution I have is to reboot my computer.
the command : iwconfig shows :
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:"Callalc"
code....
Dec 18 18:33:18 yannick-laptop wpa_supplicant[1390]: Failed to initiate AP scan.
View 1 Replies
View Related
Jan 13, 2010
I have a Sony VAIO VGN SR29VN with ubuntu 9.10; I am trying to make a wifi connection through WPA work, to no avail. WEP and open connections work correctly, but when I try to connect to a WPA network using TTLS via network manager, y get errors of this type:Current regulatory domain updated by AP to:ES
preceded by lots of "leaving channel xxxx intact" and followed by "disassociating by local choice".This Sony is using an Intel 5100 wifi; any idea of what's going on or how to fix it?
View 3 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
May 9, 2009
I've been wondering lately about what would be the best approach to take concerning WiFi on my laptop (or laptops in general) ? Understand my question concerning this is ONLY about performance and no other issue.
What is the better thing to do:
a) install a new (better) WiFi card inside my laptop,
b) remove the card inside my laptop and use a WiFi USB stick,
c) remove the card inside my laptop and use a WiFi PCMCIA card?
Is simply being external to the laptop going to give me better performance in terms of locating and using a WiFi connection? On the laptop I'm currently using I know that merely rotating the laptop can boost the connection signal strenght by 15% or more. So, I'm really wondering about this. btw, I'm seriously giving thought to glueing a 3 or 4 inch lenght of 1/2 inch pvc pipe to the lid of my laptop as a holder for a homebrew parabolic WiFi dish. The idea is to attach the USB WiFi stick to a piece of coat hanger wire. Then slide the bottom and top of the coat hanger wire into a piece of paper (that's had aluminum foil glued to it) forming a parabola behind the WiFi stick. By rotating the parabola in the pvc holder I can instantly directionalize the reception/transmission of the Wifi USB stick. I'm wondering if anyone in the forum has experienced the difference between an internal vs an external WiFi device? Secondarily, has anyone in the forum tried the parabola trick?
View 2 Replies
View Related
Apr 6, 2010
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
View 3 Replies
View Related
Dec 12, 2010
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
View 1 Replies
View Related
Jan 11, 2010
I've just installed the ubuntu 9.10. I have one problem with it. I have a home net in configuration: Windows XP on a cable, Ubuntu on a cable and Windows on wifi. When I'm surfing on the net on Ubuntu, Wifi isn't work how it should. It's very slow and I don't know what to do with it. Windows XP on a cable is OK, it works good. What happen and how can I repair it?
View 2 Replies
View Related
Feb 3, 2010
I just recently installed Ubuntu 9.10 on a dell laptop. My WiFi connection that I've been using on the same computer for years is not working when I log on. However if I run the burnt image cd and choose the option "Use Ubuntu without making any changes to your computer" I am asked if I want install proprietary drivers. If I activate one "Broadcom STA" I can connect to the wireless connection in my house. When I am using the version installed on my laptop it doesn't ask me if I want to install the drivers and it doesn't even find them when I go to hardware drivers under system. So to sum it up I can get connection when I run Ubuntu from the cd but not when I run the Ubuntu on my laptop.
View 3 Replies
View Related
Jul 23, 2010
I cant connect with ssh to my workstation using my notebooks wireless lan. with cable I'm able to connect.so the funny thing is, if I first establish a connection from my workstation to my notebook (like ssh it or just ping the notebook) I'm able to create a ssh connection from my laptop to the workstation using wireless lan.scanning my workstation from the wireless lan of my notebook with
Code:
nmap -sT -p 22 ventury
says port 22 is closed
scanning it from the notebook with cable lan,it says port 22 is opened
scanning it from the wireless lan of my notebook an have sent a ping from the workstation before says port 22 is opened.ution.
I got a 64bit version of Kubuntu 10.04, up to date, installed on both, my workstation(ventury) and my notebook (defiant).the question is: Do I always have to ping my notebook first if I want to ssh from it to my workstation or is there some other solution? And why does it work fine with cable, but not with WiFi?
View 4 Replies
View Related
Aug 5, 2010
I just removed ubuntu-desktop in favor of kubuntu-desktop. Now I can't create an ad-hoc wifi connection however hard I tried from network-manager. It simply is not visible to other PCs. And when some connection is created on another ubuntu PC, I can't connect to it.. I switched NM off and tried the CLI way.
[Code]
View 1 Replies
View Related
Jan 9, 2011
I'm brand new to Ubuntu, and Linux in general, and honestly don't know what I am doing. I installed Ubuntu 10.04 on my external hard drive and am able to boot fine (other than an issue with my monitor falling asleep because my graphics card needs a different driver. I have a work around for this that i'm currently using but I would like to fix it permanently and thus need an internet connection.)
When trying to connect to the network in my home, I am unable to. I click on the WiFi symbol in the top right corner, and I can see my network. I then click it and a page comes up asking for the key. I put it in but it doesn't sync and usually after a minute or so it pops back up asking for the key again.What can I do to gain internet access? I'm unable to connect my computer via a hard wire Ethernet cord and need to sort out this WiFi issue.
View 9 Replies
View Related
Mar 14, 2011
I bought my MacBook Pro at the beginning of the school year when I went to college. I am now living in a dorm where I do not have access to wired internet connection, so I cannot just plug my computer in to download stuff. If need be I can of course borrow someone else's computer to download something and then just transfer it over with a flash drive.
Anyway, I have a virtually new MacBook Pro that I bought in August. Using refit I have dual-booted OS X and Ubuntu (obviously I am posting this from within OS X) but I cannot manage to get connected wirelessly to the internet. I have tried this many many times with many many distros and have never once been able to connect. I understand that there are various tutorials around but none of them seem to help me at all and I really want this to work. I've been looking around and trying things for about two days now. Can someone give me step by step instructions (or point me toward some simple ones) starting, if need be, from a fresh install as to how to get wifi working on my macbook pro? I am also completely willing to switch versions of Ubuntu if that would help.
Ubuntu 10.10
Hardware-
MacBook Pro 7,1
Intel Core 2 Duo
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 5.100.198.11 )
View 1 Replies
View Related
Oct 24, 2010
Strapping to 2 wifi connections together how would i do this?uld i need a dedicated machine?
View 1 Replies
View Related
Jan 15, 2011
I am new to linux and also new to this forum. I love how light Slax is but it won't let me connect to my wifi. It scans and finds my router but the option to switch to the network is grayed out. How can I fix this problem?
View 1 Replies
View Related
Mar 19, 2010
Using an old (5 year) laptop with XP loaded I installed wubi to save altering partitions etc. It all downloaded fine and connected to the internet by wire. I set up the wireless connection using WPA but could not connect. The wirelsss card does see my network and others. After lurking around the forum and trying various things I found that I could connect without encryption. The more I read the more I became confused.
Anyway what I could glean about my Wireless Card it is a Intersil Prism2 mini usb adapter - but also shows up as an Acer ?? Warplink 802.11.
Using lshw I found this reference to wireless
I became even more confused and got a bit lost using the various codes in the terminal and looking up things about drivers etc but would like to persist.
View 1 Replies
View Related
Apr 21, 2010
I've been having 2 issues with my internet connection on ubuntu for as long as I can remember, I've tried updates but they haven't seemed to work so great and am pretty fed up with this. So I have a Netgear wg111t wireless usb dongle which I got working through ndiswrapper. The 2 issues I am having are:
1. After a random period of time my internet just decides to disconnect, the strange thing is the bars at the top still say I'm connected. The only way to get the internet working again is to turn the pc off and on. Another way I have experienced this happening is usually when I'm downloading something off a torrent.
2. After restarting my pc the wifi usb isn't recognised and I can't connect to the internet.
View 6 Replies
View Related
May 1, 2010
I'm having a really strange problem with my wifi connection on my laptop. The ethernet connection works fine and so does the wifi connection - as long as I sit within one meters range from my router! As soon as I take the laptop further away the connection drops. The router is still being found by network-manager and the signal is just below 100%, but when I try to establish a connection it fails.
I'm sitting here on a fresh Ubuntu 10.04 install, and I had exactly the same problem with 9.10. That time I went through a lot of different procedures, and in some strange way the problem was solved. I haven't been that lucky this time though, I've tried reinstalling network-manager, using ndiswrapper, installing the wireless backports package, tried all kinds of drivers.. nothing works.
There shouldn't be any problem with the connection itself; I've had a perfect connection downstairs but now I can't even connect if I stand two metres from the router! Has anyone experienced anything like this and managed to fix it? My wireless card is Atheros AR2413. This is an example from daemon.log
Quote:
Apr 30 00:45:51 petter-laptop NetworkManager: <info> Activation (wlan0) starting connection 'Auto Wester'
Apr 30 00:45:51 petter-laptop NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code]...
View 9 Replies
View Related
Jun 7, 2010
I have a Dell Inspiron 1525 running Jaunty Jackalope. I have a good working wireless connection.
My daughter has a lot of iPod tunes stored on an old white chiclet Macintosh, which she needs to download to her iPod. Because the iPod is "corrupt" (meaning it was last connected to Windows!), we need to connect to internet.
Simplest way to do that would SEEM to be to plug an Ethernet cord between the two machines and let her Mac access internet via this Dell.
My experience with ethernet is, either it works out of the box, or it doesn't. If it doesn't, I have no idea how to make the connection work.
What do I have to do on BOTH the Jaunty and OSX sides to make the connection?
View 4 Replies
View Related
Aug 22, 2010
I have installed ubuntu 10.04 on a new laptop siemens xi3650. I have Vista installed on it, and it works perfectly. On Ubuntu the wifi connection stops after a few seconds, and it wont reconnect until I restart the pc. The only mean I have to connect to internet is vie ethernet on ubuntu, or ethernet or wifi with vista. here is the results of the OS information:
Code:
genni@genni-laptop:~$ uname -r -m
2.6.32-21-generic x86_64
and the result of commands related to the network manager and the wifi connection. lsusb
Code:
genni@genni-laptop:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 9 Replies
View Related
Feb 17, 2011
What would be the commands I'd use to connect to aWireless access point, enter the password and delete the wireless name I am connected to through terminal.I do know that the command nm-tool lists all wifi connection ports even my IP address field, just want to take it a step further...
View 2 Replies
View Related
Jan 13, 2009
I have been using Linux via my Acer Aspire One for a few weeks now without any problem. Suddenly I find I can get a WiFi connection but consistently it fails to load the pages. I have tried 2 connections so I know it's my machine. And probably something I have touched. How to reset the the internet settings or better still can I reset the computer back a few days (like in Windows) to resolve this problem?
View 1 Replies
View Related
Jan 23, 2011
I switched to the b43xx (lp-phy) driver, as opposed to the broadcom STA driver which I previously had. I have dell 8312b/g lp-phy(mini) wireless card.
I have the wireless detection, but when I attempt to connect to Fios WiFi it continuously asks for my WEP (I have the correct WEP and I have typed it in correctly) and fails to connect.
I've read about the driver and firmware on linuxwireless and kernel.wireless. org.
http://pastebin.com/w44Xbgw3 (lspci -nnk output)
http://pastebin.com/C5BDhgZ9 (iwconfig output - this printed while trying to access the network)
Why is this happening? How can I fix this?
View 1 Replies
View Related
May 24, 2010
Is it possible to monitor WiFi connections and identify who are connected through OpenLDAP? If so, how will authentication be possible? By the way, I'm open if OpenLDAP is inappropriate for such authentication purposes and scenario.
View 2 Replies
View Related
Jan 5, 2010
Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present
View 1 Replies
View Related
Jan 25, 2010
I have an Asus laptop with a BCM4318 wifi chipset. result of lspsci command about wifi cards:
Code:
00:09.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) For some reason, I often get disconnected. Once it's disconnected, I cannot connect anymore and I need to reboot my laptop in order to get the connection back! I didn't have this problem when I was on Ubuntu 8.04. I checked in /var/log/syslog and I found this when the network is disconnected:
[Code].....
View 9 Replies
View Related
Feb 19, 2010
I face in getting my wireless connection work. I am able to establish connection with my router and browse router configuration pages successfully. However, trying to access any other internet address (through browser or ping etc) results in intolerable poor performance (70% to 100% packet loss in ping). Ethernet connection (eth0) works perfectly though. Am furnishing the details below:
Netbook: HP Mini 311
Product No: VM257UA#ABA
Model No:311-1000NR
Ubuntu Netbook Remix:
[Code]...
View 9 Replies
View Related
Mar 20, 2010
I want to share my internet connexion via ad-hoc WiFi. If it's unsecured, it works fine, but when I use WPA encryption, it doesn't work anymore! I can connect from my iPod touch, but no internet. I connect to the internet from my laptop, via eth0 I want to share my internet connection via wlan0 I have no idea what's wrong
View 1 Replies
View Related
Jul 6, 2010
I have been using windows 7 for awhile now, and i was using connectify (an internet connection sharing program that turns your laptop into a wireless router), and i'm planning on completely switching to Linux from a dual boot, and i was wandering if there is a way to share an internet connection (mainly to my PS3) on Ubuntu 10.04 x64, and wirelessly if possible, though i wouldn't mind if it was through Ethernet.
View 1 Replies
View Related
