system: centos 5.5 Kernel 2.6.18-194.el5 freshly installed. bind is configured in chroot environment out of the box. placed named.conf in /var/named/chroot/etc and my zone files in /var/named/chroot/var/named.
[Code]...
I have installed CentOS 5.5 final on VM ware 7.0 workstation.... and I was trying to install and configure bind9.. it installed alright but it refused to start because named.conf is not in the /etc/ directory. I have copied the template for /usr/share/doc/named/* to (/etc/ and /var/named/) the appropriate directory but it still fails but on it does not gives me any error message. Oh... least I forgot I was trying to configure it as a cache only server for now.
View 1 Replies View Relatedwhen i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
View 4 Replies View RelatedHere's my current setup:Ubuntu 10.04
When I go to run it via this command:
I get the following error message:
Quote:
This is my /etc/bind/named.conf.options file:
Code:
I've looked at various solutions already:
[url]
[url]
[url]
[url]
[url]
[url]
I have CentOS 5.2 just installed and massively updated with yum -update command. Than I tried to configure firewall. After changes via system_config_securitylevel_tui (open ssh, http, ftp, and 3306:TCP ports) iptables service can't start with message
> /sbin/service iptables start
Flushing firewall rules: [OK]
Setting chains to policy ACCEPT: mangle filter nat [OK]
Unloading iptables modules: [OK]
Applying iptables firewall rules: iptables-restore v1.3.5: Couldn't load match `TCP':/lib64/iptables/libipt_TCP.so: cannot open shared object file: No such file or directory
Error occurred at line: 18
Try `iptables-restore -h' or 'iptables-restore --help' for more information.
[FAILED]
I erased the iptables service and installed it again with yum. How can I make this service work?
Im trying to set up a slave dns to my master, but the problem is that only one of the views is being transferd.
View 1 Replies View RelatedI am running centos 5.3 with the latest bind, i have made some changes in the config and now it wont start.
Fel i named-konfigurationen:/etc/named.conf:27: unexpected end of input (last line)
My named.conf looks like this:
options { directory "/var/named/";
};
view "externt" {
match-clients { any; };
recursion no;
zone "dala.hk" {
type master;
file "dala.hk";
};
zone "0.0.168.192.in-addr.arpa." {
type master;
file "1.0.168.192.in-addr.arpa";
};
};
view "intern" {
match-clients { 192.168.0.0/8;};
zone "intern" {
type master;
file "intern;
};
};
I've been bashing around this for a couple of days, and could not find answer by using google. My debian 8.1.0 jessie runs perfectly fine. To perform SSH chroot jail, I issued an apt-get install makejail.
The ssh chroot environment runs great. I used makejail configuration scripts. The man pages are perfectly available from TTY login. Yet from a SSH session (chroot jailed) the man pages could not be found.
My MANPATH environment variable points at /usr/share/man
Running "mandb -c" from a SSH session as root tells:
0 man subdirectories contained newer manual pages.
0 manual pages were added.
0 stray cats were added.
0 old database entries were purged.
simply copying the contents of the /usr/share/man to /jail/usr/share/man
and running the "mandb -c" command gives lots of "dangling symlink" errors.
Perhaps the /jail directory need some dependent files, or change file permissions somewhere but I just couldn' t figure that out.
I`m running openSUSE Tumbleweed so the first question is: can i run ONLY another openSUSE OS inside the environment ? or can i run any distro i want ?
My second question is how do it set up the environment to act just like my normal OS, with both root and user rights on it? and of course can i run X ?
And finally third question: after googling a bit i did not found a tutorial for openSUSE but i have seen that is says that i have mount and/or bind certain things, how do i make the same thing under openSUSE for the respective chroot environment?
i created a chroot environment for maverick. while installing packages and ubuntu-desktop it says that i need to restart. when i pass the command " sudo shutdown -r 0" my whole system gets restarted. how can i restart that particular environment.
View 3 Replies View RelatedI created a chroot environment for lucid. when i log in by executing this command "sudo chroot /var/chroot/lucid" it logged me in as a root user. i created a new account there, when i log in by that account i cant see anything written before $ sign. even if i change directory or anything else i cant see anything.
View 1 Replies View RelatedHow can I use the ping command in a chroot environment?
$ ping 8.8.8.8
ping: icmp open socket: Operation not permitted
Currently I am using CentOs, but ideally there must be a solution that works in all chrooted environments.
How to crete a 64bit chroot environment? Im not able to run Virtualbox.
View 2 Replies View RelatedI have successfully installed a Ubuntu chroot (Maverick) on a running Linux appliance (an old Thecus N5200PRO box) which has been running various services for me quite happily.
When I attempted to add a webcam (for snapshotting) to this mix, I've come up against a problem. Since the chroot by default uses the kernel of the Thecus appliance, there appears to (understandably) be no support for the Logitech UVC webcam in the appliances' kernel; consequently inside or outside the chroot I can't access the UVC webcam.
I think I can get around this in a simple way if I can run a standard Ubuntu Maverick 32-bit kernel in the chroot.
Does anyone know how to chroot with alternative kernels, or quite simply, how to get a UVC webcam accessible on a Thecus N5200PRO?
Other details:
lsmod output
Output of uname -a:
Linux cube 2.6.23N5200 #1 PREEMPT Wed Jul 29 14:13:22 CST 2009 i686 GNU/Linux
lsusb -t output
My script is like this
Code:
How can i make the script do all those command using the script?
ccess to an iso file in chroot environment from my usual root (/) env..
Within the chroot environment I have an iso file placed... In my program I need to access this iso file and perform mount and other operations.. But I cant do this in the chroot environment as I have only basic commands here (ls,cp etc.. and no mount)
So how can I access this iso file from my program ? Is there something like a file-descriptor which I can associate with the file exit from the chroot env and access the file via this fd ?
I followed blindly this how to : [URl].. out of laziness and then for some reason bind9 didn't want to start. So I tried to apt-get remove it, but when I re-install it, it failed because
Code:
chgrp: cannot access `/etc/bind/named.conf*': No such file or directory
so I assume the chrooting stuff I did is in the way, but I know very little about chrooting and permissions ... how can I undo the following things I did :
Code:
/etc/init.d/bind9 stop
[Code]...
i can start applications like Openoffice, firefox and other graphical app inside terminal on gnome.
View 3 Replies View RelatedOn a 64 bit CentOS host I am using script make_chroot_jail.sh to put a user in a jail, not permitting it to see anything expect it's home at /home/jail/home/user1.
I did it typing this:
After, when trying to connect to user1 first i was getting an error like:
I have fixed this by copying some missed libraries:
But now, when trying to connect to user1 typing su user1 and then typing it's password, i am getting this error: could not open session
So the question is how to connect to user1 in this situation?
Here are the permissions of some files, this might be helpful in order to provide a solution:
After some modifications i managed to connect to user1, but the session closes immediately! I guess this a PAM issue, however cant find a way to fix it.
Here the log entry for close action from /val/log/secure:
What makes the session to exit immediately after launching?
I got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
View 7 Replies View RelatedRecently did a clean install (instead of upgrade) of 11.04 from 10.10 and this error bugged me for the first time.
ubuntu@ubuntu:~$ sudo apt-get install grub-pc
Reading package lists... Done
Building dependency tree
[code]....
followed this one too to the letter: ubuntu@ubuntu:~$ sudo chroot /mnt/clean/sda1 apt-get install -y grub-pc chroot: failed to run command `apt-get': No such file or directory tried this one too:
ubuntu@ubuntu:~$ sudo grub-install /dev/sda1/usr/sbin/grub-probe: error: cannot stat `aufs'.and this too which got me a bash something:
ubuntu@ubuntu:~$ sudo mount /dev/sda1 /mnt
ubuntu@ubuntu:~$ sudo mount -o bind /sys /mnt/sys
ubuntu@ubuntu:~$ sudo mount -o bind /sys /mnt/sys
[code]...
Before to describe my problem I want to say that I searched a lot on the internet and I think I tried all the solutions provided by other users to similar problems.
I've got an IBM xSeries 346 server running CentOS 5.5 with all updates applied with yum.
The video card is an ATI Radeon (lspci says: 01:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]).
Everything worked fine until a bad day where there was an environmental power failure and the server crashed.
I turned it on, I manually check the file system, some files went lost and after the reboot the X server didn't start.
After the first boot I had problem with /etc/rc.d/rc.sysinit, sbin/multipath.static and /dev/cpu/microcode, I solved them and now the message it shows is:
"Failed to start the X server (your graphical interface) It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?"
I choose OK and it appears an empty log, if I go in /var/log/gdm and I do an ls -al:
total 0
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.4
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.3
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.2
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.1
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log
So a lot of empty log files.
I press enter on the OK that appears at the bottom of the screen and it says: Would you like to try to configure the X server?
I choose Yes, I enter the root password and appears the following messages:
Couldn't start X server on card 0
Couldn't start X server with old config, trying with a fresh configuration
Then another messages:
Trying to restart the X server, I press enter on OK and it loops the initial message ("Failed to start the X server...)
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies View RelatedI installed CentOS 5.6 (kernel: 2.6.18-238.12.1.el5) with X Window on my HP Compaq 6710b. I also downloaded the firmware iwl3945 for my Intel Pro Wireless 3945 and manually installed it, reloaded the iwl3945 module and enabled NetworkManager. I could then get the wireless network connection worked on my graphical environment. I installed additional software manually by using the terminal window (Applications --> Accessories --> Terminal) and everything worked perfectly.
However, when I switched to text-based environment by issuing the commend "sudo init 3" (changing the user level) and logging in as root, I could not get any internet connection. I tried to use lynx and I got the error message: "Unable to connect to remote host". I am a complete newbie in Linux and I tried to google and search for solution within centos.org but I could not find.
I just started setting up a linux box in the office...I have some experience with ssh commands but not setting up a linux system and stuff.The box is connected to our network but I have no clue how to make windows & osx talk with it. How can I go by doing that and also setting up an apache server to be able to connect through network. Right now I have apache/linux/mysql running it works when i go to localhost, but I would also like to let all the computers in office to access it. I would guess that will deal with virtual host which I know how to setup. I just need to setup an IP.
View 19 Replies View Relatedrecently we decided to make our own panel (like Plesk or cPanel) but for Ubuntu and it will be licenced under GPL (like any other professional sofware).want to make a panel not only that fits our needs but also the needs of other system administrators and domain owners. We researched other panels and found out that non of them has security/look/ease of use in one package. Bad codig is another problem found in other panels.I made a short overwiev of what I think we have to have in the beginning.I Security :1. Completely chroot enviornoment where every single service is in chroot mode (bind,mysql, postfix, .... )2. Easily managed IPtables trough web-based interface. 3. Coding rules has to be strict.
II Software selection :
1. MTA - Postfix
2. POP - dovecot
[code]....
Just completed the upgrade to 10.04 from 8.04, and ironing out the wrinkles. Since the upgrade, I'm not able to establish a VPN connection to my institute (a problem since outgoing mail REQUIRES a VPN connection) The pull down menu shows the connection as an option, but clicking on it brings up a separate window that simply says "The VPN connection CfA failed because the VPN Service failed to start." Never had this issue under Hardy, so not sure what's going on. Under "Configure VPN" the settings look the same as they always did.
View 7 Replies View RelatedI configured vpn successfully as per [URL]
when I start it i get a message "The VPN connection bestfreevpn.com failed because the vpn service failed to start'
What needs to be done. My net is working normal. Just wanted to try VPN.
ive created user in my server for vsftp and they are chroot when they use the ftp but not when they use the shell. How to chroot them into the shell?
View 3 Replies View Related