I've been trying to revive my old Acer Aspire 3680, which is supposed to have Acer InviLink 802.11b/g Wi-Fi CERTIFIED solution, supporting Acer SignalUp wireless technology, as shown is in Specification.The system simply doesn't detect Wi-fi and I don't know how to make it work.
View 9 RepliesI've just installed 10.4 and it works like a charm. The only problem I have is that I've plugged my ipod touch 3g in and nothing happens. It seems like the system doesn't detect it. Opening rhythmbox nothing happens either.
Do i need to do any extra thing in order to have my ipod working?
The only thing I can see in the syslog is this message:
I'm new to linux and having a lot of problem, and I would really apprecaite the help. It all started when I connected my laptop to an LCD. Since then, my system doesn't detect its own screen. So I have to escape as the start of reboot and go to a recovery mode and select failsafe screen. Ubuntu then set to lowest graphic mode. It's no way to keep a set up for the long run. I've tried to reinstall Ubuntu from a CD but that doesn't work. .
View 2 Replies View Relatedi'm using a dell n5010 recently i installed ubuntu9.10 in my laptop and it doesn't seem to detect wireless connections, so, i googled it and downloaded a driver from broadcom and tried to install it as per the authors instructions and nothing seems to work well, the broadcom drivers are not detected in the additional drivers and when i try to install linux-wlan-ng tarballs it doesn't seem to work even, though i have gcc(i think thats it), so, i installed my windows driver through nsdgtk but it says that it is "unable to see if hardware is present" but, when i click ok on the error the wireless network applet says the hardware is present and when i click the network configuration tool it gives the error message "could not find a network configuration tool" and after configuring my network with network tools in administration it says "no wireless extensions" when i type 'iwconfig' and there is no ip address when i type "ipconfig".
View 9 Replies View RelatedI can connect to the internet using wvdial but NetworkManager is a no-no. Here is some information that's relevant:
Code:
# lsusb | fgrep Huawei
Bus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
[code]....
I've got Puppy Linux on a USB key, and yesterday, while I was on the internet with it, it hanged. I didn't know what to do, and I rebooted from the button (I now know what to do ). The problem is that, after rebooting, Puppy doesn't recognise the router. I've tried to apply the drivers that are on Puppy, but there aren't any compatible.
My router is a Xavi 7968 and my Network Card is:
NIC Fast Ethernet PCI Familia RTL 8139 from Realtek
(On Realtek's website, there isn't any driver linux-compatible)
I'm trying to configure the following network card to work with a 1000Mbps switch:
Code:
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
I think the problem is the network card module. When I run
ethtool eth0 nothing of 100Mbps is showed:
[Code]....
I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration
View 2 Replies View RelatedI have looked through many different forums and ..... tutorials on how to get Samba to work. I am new to Ubuntu (Linux in general). I am able to access my shared folders on my Windows 7 system with my Ubuntu system. I cannot access the shared files on my Ubuntu though on my Windows 7.
View 1 Replies View RelatedI am trying to use Verizon MIFI mobile broadband and ubuntu jaunty jackalope doesn't detect the connection. Verizon has software for mac and windows but not for linux.
View 1 Replies View RelatedI run a Centos server that quite a few people have access to. I trust every user on the system, but i've had problems before like one user's account gets hacked and someone starts using my box to DDOS. Each user has their own ip.. And I would like to write a script or use an existing solution (if one exists) to monitor number of tcp/udp connections each minute and see if it's unusually high. I don't want it to stop the flooding or anything, I just want to be notified by email or something.
View 1 Replies View RelatedI use slack 13.1 64 bits on my intel i7 machine. That is I can't find a flash-player plugin that works on all browsers. The firefox crashes on open. The release of adobe 64 bits plugin simply doesn't work on any browser. I use slack 13.1 64 plus kde. Anyone knows some that works?
View 6 Replies View RelatedI have a Broadcom Corporation BCM4312 802.11b/g (rev 01) wireless card. I installed these packages:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
akmod-wl-5.10.91.9.3-3.fc12.6.x86_64
kmod-wl-2.6.31.6-145.fc12.x86_64-5.10.91.9.3-3.fc12.8.x86_64
[code]....
uname -a says:
Linux boz.alafkhar 2.6.31.6-145.fc12.x86_64 #1 SMP Sat Nov 21 15:57:45 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
and:
# lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
[code]....
My networkmanager understands that the card is installed. But it can not find any network. Also iwlist scan gives me no result. I did not have this problem on earlier fedora releases. Recently I upgraded to F12 from F11. I should mention that I have another USB DLink wireless card and when I plug it, everything works fine with that card. I also tested wl_apsta driver using fw-cutter. I did not work neither.
I have an ubuntu machine connected to my network which is used as a Minecraft server, storage, and a subsonic server for music. For the most part, the only person using these services, especially during downtime, is just me at home. Which is why I'm surprised that 2-days ago I detected that my network was being slowed to a crawl. There I found that the ip connected to my ubuntu was moving around 170,000 kb on my Netlimiter 3 program.
I have no idea why that is, I closed my ports that were forward for the ubuntu servers, but the bandwidth keeps leaking. Disconnecting the network from the ubuntu computer or turning off the computer stops the odd downloading and uploading. If anybody would have any information of what I can check or shut down in Ubuntu, please let me know. I'm fairly a beginner to the OS, but haven't been able to find a similar problem on this forum.
I have a linux desktop with two connections - fast eth0 and slow modem ppp0. Most of traffic (e-mail, DNS, NTP) can be routed simply by IP/mask. But how about http and p2p (torrents, DC++)? Routing by IP is unacceptable, because there is very huge amount of routing rules. I need route http packets (80 port) through ppp0, p2p through eth0 (10000:65535 ports). I've found that splitting traffic by port is possible with marking packets for different gateways. For begin I cleared all tables and bringed up connections.
Code:
# iptables -F -t mangle
# iptables -F -t filter
# iptables -L -t filter
Chain INPUT (policy ACCEPT)
[Code].....
what will i do? so that i can install ubuntu on that partition?
View 2 Replies View RelatedUpgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
[Code]...
I installed sun-java6-plugin and copied the symlink of /usr/lib/jvm/java-6-sun/jre/plugin/i386/ns7
[Code]...
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
View 2 Replies View RelatedI have a little problem. As soon as I boot my computer, Grub gives me an error 17. It happened after I tried to resize my Windows partition with a program. I have a dual boot between Windows 7 and Ubuntu 9.04.I've tried everything I could find on this forum and on the rest of the internet, but nothing was working. Most of them require a Windows CD (god knows where it is) or reinstalling grub and all that stuff, but it's all not working.I'm currently on a Ubuntu Live CD. Gparted doesn't detect any of my partitions, but just says 232 GB unallocated space. Palimpsest Disk Utility and the Explorer see all my partitions though EXCEPT my Windows 7 partition I tried to resize.
View 1 Replies View Related"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
[code].....
I have several RHEL 5 installed on ProLiant DL380, they all can't detect the CD/DVD hard dirve when i insert the CD. Do you now why is that, how can i fix it?
View 1 Replies View RelatedSince I have upgraded to Ubuntu 10.04 Lucid Lynx, my second graphics card isn't detected by X server. When I do an lspci I get both listed though. I am using NVidia's driver v195.36.24
View 1 Replies View RelatedI'm trying to hook up my TV to my MacBook1,1 laptop running the Lucid Lynx Beta. The TV is connected to the laptop via a mini-DVI to DVI-I adaptor, which is connected to a DVI-I to video adaptor, and this is connected to the TV via a component cable.
Under OS X, after plugging in the mini-DVI cable, the TV automatically becomes a secondary display for the laptop (extending the current screen), so from a hardware perspective everything seems ok. Under Ubuntu, plugging in the mini-DVI cable elicits no response from XRandR whatsoever (xrandr -q reports DVI1 disconnected both before and after). URandR and the regular "Detect Displays" button in the "Monitors" preference app do nothing. The laptop has an Intel GMA 950 chipset, and the Intel driver is running successfully (Compiz works fine). I have a clean xorg.conf (generated by X -configure), except for the addition of "Virtual 2048 2048" in one of the SubSections of the Screen section. I'd be happy to post the full xorg.conf if it would be useful.
So far I have tried xorg.conf tweaks, and I have followed instructions to manually tell xrandr to output to DVI1 as described in the comment by Marko Mikulicic here.
I'm running 10.04 on a Radeon HD 4650 card with fglrx. The driver installation went without a hitch, and the log file contained no errors.
When I try to run
Code:
aticonfig --initial
i get the response
Code:
Found fglrx primary device section
Unable to find any supported Screen sections
Running
[Code]....
My best guess is that I have to write an Xorg.conf file, in which I say what type of monitor I have.
I cannot do that, as I need to shut down the Xserver in order to make it generate my xorg.conf file. When I shut it down I get the black screen.
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies View RelatedI am running 10.04 and don't know how to "add" my Motorola razor cell phone so I can download my pictures to my p.c.
View 1 Replies View RelatedMy little 40 GiBs hdd is kind of small by current standards. When I start running out of space, I always wondered what else I could do with those hundreds of music videos? Put 'em on dvd!
But 11.3 doesn't detect the dvd-rom, much less the disc. 11.4 did and the sound was much better than with my other Linux os. How can we fix this?
I installed Ubuntu using Wubi, and the boot loader does not detect my keyboard. Does the windows boot loader only support PS2 keyboards? Would there be a workaround... like install DOS drivers for it? I have a logitech s520 keyboard.
When in Windows, I can select what OS to use, but is there a way I can select which OS to use while booted into Ubuntu? Is there a program that will let me modify the windows boot loader from within Ubuntu?
I own an EeePC 701; right now I'm giving 10.04.1 a test run on it, using a live usb.
The EeePC has an Atheros wireless card, but live Lucid doesn't detect it. Here's the output from a ifconfig command:
Code:
Will the card be detected by a properly-installed Lucid? Is there some package I need to install so I can use wireless? Or should I steer clear of installing Lucid on my EeePC?