Ubuntu :: 10.10 Installation Doesn't Detect Hard Drive?
Oct 28, 2010
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies
ADVERTISEMENT
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
Aug 4, 2010
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
View 1 Replies
View Related
Apr 29, 2011
I am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies
View Related
Aug 3, 2010
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
View 2 Replies
View Related
Apr 21, 2010
I got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.
I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.
View 4 Replies
View Related
May 26, 2011
I am installing Fedora 15 for the first time - Fedora-15-x86_64-Live-KDE.iso. I used LiveUSBCreator to copy to a memory stick.
I boot OK and start the install process and choose "Basic Devices" but it does not appear to detect my only hard drive (SSD). All it detects is the USB memory stick that I booted from.
I have Windows 7 on my disk. There is about 50GB free space which I planned to use for Fedora.
View 2 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Dec 10, 2010
I've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
View 9 Replies
View Related
May 20, 2010
When I try to install 10.4 on my hard drive, I get all the way to the "Prepare Partitions" menu and there are no disks listed and all button are grayed out. I am installing on an EVGA X58 motherboard with Intel ICH10 and I have AHCI enabled. Does Ubuntu support AHCI? Do I need drivers to install?
View 3 Replies
View Related
Nov 3, 2010
When I try to install it gets to the partition manager screen but does not see the hard drive.
Hardware Specs:
AMDX64 3800+ Socket 939 duel core
Asus a8n32-sli motherboard nforce 4 chipset
Nvidia 8600gts
2 GB Mushkin Memory DDR 400
Samsung 80GB Model: HD080HJ/P Hard Drive
Things I've tried:
I tried a different hard drive Western Digital Model:WD1600bevs - That Works Fine.
I tried Different Versions of Ubuntu 9.10X86 9.10X64 9.04X86 - None Detect Hard Drive.
I Tried Jumping the Samsung Drive from 3.0 Sata 2 to 1.5 - No difference
I tried th Samsung drive in an External USB 2.0 Encloser - Drive Works Fine.
I also tried installing Windows XP on the Samsung drive, Windows Detects the drive.
I deleted all partitions with acronis and repartitioned for Linux ext3 Filesystem.
At this point I determined that the drive works fine, The bios detects it no problem. Windows detects it no problem. My ubuntu CD's all pas integrity checks and will see a Western Digital Hard Drive No Problem. In my opinion it is like Ubuntu just doesn't support that perticular drive for some reason. Maybe Firmware?
View 3 Replies
View Related
Sep 10, 2010
I have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
View 1 Replies
View Related
Jan 22, 2010
Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
View 9 Replies
View Related
Feb 28, 2010
I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies
View Related
Sep 15, 2010
I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies
View Related
Jan 3, 2010
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies
View Related
May 12, 2010
I installed Debian on a old hard drive (quantum 5gb) and ran with it for a couple of days.. BUT all my data (including windows) is on my other hard drive.. so my question is What do I have to do to make grub detect windows and linux when I attach the 2-nd hard drive?
View 2 Replies
View Related
Dec 31, 2009
I just installed Fedora 12 from a DVD . The process completed without incident.
I then inserted a DVD into my internal drive and nothing happened.
I then logged out and logged in again as root, and tried again-same result; nothing!
Could it have something to do with the new PolicyKit? I didn't have this problem with Fedora 11.
View 2 Replies
View Related
May 18, 2010
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
May 28, 2010
The other day a power outage affected an SSH server I have running 9.04 (32-bit desktop ed.). I have two external USB hard drives used for cron-scheduled backups (one for rsync, one for an incremental) that are connected at all times. When I reboot, they no longer mount automatically until I login to the gnome desktop. As far as I can remember, they always mounted automatically before as disk-1 and disk-2, but now I have to login to the gnome desktop and then log back out.
I never had them listed in the fstab before since they just worked, & hope to avoid doing it this way since the drives sometimes get their paths (sdd and sde) interchanged. However, is the best way to fix this to use UUIDs in fstab vs. using sde or sdd? (such as in this post: 4highlight=external+hard+drives+don't+mount+boot Or maybeust remembering incorrectly & ubuntu doesn't mount them automatically until login? Sometimes I have to reboot remotely, & this problem would cause the rsync to fill up my system drive.
View 2 Replies
View Related
Feb 26, 2011
I have a fully operational PXE boot server, the client boots up and begins the setup process however, fails to detect the hard disk, I have tried with ubuntu 8.10, 9.10 and 10.10 and none of them will see my hard disk, I boot to the cd and it sees the hard disks with no problem, so apparently the pxe boot server isnt serving up the neccesary drivers or something to detect my hard disks properly. They are just IDE drives and like I said, regular cd install detects my drives just fine.So if anyone here has any information that may help shed some light on this issue I would be so grateful
View 1 Replies
View Related
Jan 18, 2010
Upgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
[Code]...
View 7 Replies
View Related
Feb 20, 2010
I installed sun-java6-plugin and copied the symlink of /usr/lib/jvm/java-6-sun/jre/plugin/i386/ns7
[Code]...
View 2 Replies
View Related
Jul 6, 2011
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
View 2 Replies
View Related
Oct 12, 2010
I have a ssd cosair harddisk with both usb and sata connecters. If I connect it with sata anything is working fine, and I managed to install Fedora core 13.
But I also want to be able to use the harddisk when it is connected with usb and that causes problems.
When I boot the Fedora Core 13 dvd It can't detect my usb harddisk.
When booting in install mode it just don't detect the harddisk.
When booting the dvd in rescue mode it don't detect the harddisk, and it don't create any entries in /dev/ for the harddisk. It is like there is no disk at all.
I have tested this on 3 different computers, so it is not a problem with my specific motherboard. So either it is a problem between my harddisk and Fedora Core 13, or there is some problems with the usb drivers in the boot image used by the Fedora core 13 dvd.
The disk is working fine if I connect it via usb to an existing Windows install, so the usb connection is working.
I installed Fedora core 13 with the harddisk connected to sata and then re-connected the harddisk to usb. It then boot up, but complain about missing root filesystem. Most likely caused by missing usb driver in my kernel.
But anyway, what I really want is the ability to boot from both sata and usb, so I can take the harddisk with me and boot it on other computers with usb.
So is there a command which allows me to build an kernel image which can boot from usb or am I trying to do something which is not really supported?
I did update my fstab to use LABEL=myroot
There is 1 Windows partition(NTFS) and 1 linux partition on the disk. (No seperate /boot partition and no swap)
View 1 Replies
View Related
Jun 14, 2010
i installed quake 4 with id software's run file and copied the pk4 files to the folder but anyways, when i deleted the game, the free hard drive space didn't come back. i had 20 gig free before install and when i installed it, i had 18 gig free but then i deleted it and i still have about 18 gig free. it didn't free up any space when i deleted it.
View 2 Replies
View Related
Feb 24, 2011
I recently bumped the power cable on my debian server at home. The computer shutdown, and since then hasn't been feeling like going past grub. When I boot the computer it gets to the "Welcome to Grub!" screen, but doesn't load my menu. I booted into a live cd and the hard drive seems intact and accessible. I re-installed grub without any problems, but the same problem is happening. I tried running fsck, but it says that the "device or resource is busy while trying to open /dev/sda". I am kind of stumped and would prefer not to reinstall debian to get this box running.
View 2 Replies
View Related
