Fedora Networking :: F12: Broadcom Wireless Does Not Detect Any Network On X86_64 System
Dec 8, 2009
I have a Broadcom Corporation BCM4312 802.11b/g (rev 01) wireless card. I installed these packages:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
akmod-wl-5.10.91.9.3-3.fc12.6.x86_64
kmod-wl-2.6.31.6-145.fc12.x86_64-5.10.91.9.3-3.fc12.8.x86_64
[code]....
uname -a says:
Linux boz.alafkhar 2.6.31.6-145.fc12.x86_64 #1 SMP Sat Nov 21 15:57:45 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
and:
# lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
[code]....
My networkmanager understands that the card is installed. But it can not find any network. Also iwlist scan gives me no result. I did not have this problem on earlier fedora releases. Recently I upgraded to F12 from F11. I should mention that I have another USB DLink wireless card and when I plug it, everything works fine with that card. I also tested wl_apsta driver using fw-cutter. I did not work neither.
View 6 Replies
ADVERTISEMENT
Apr 17, 2010
I recently installed Fedora on an old computer of mine that I pulled out of storage, and I can not get it to detect my wireless network. Previously it was running Windows XP and I was able to get it to connect, but now that I'm on Fedora it doesn't even detect my network. I tried lspci and lsusb but I didn't find anything under network, only Ethernet showing my linksys. I know I must have a wireless chipset, but nothing will show.
I also attempted to yum install ndiswrapper because another thread with a similar problem suggested this, and when it prompted me for my password it wouldn't let me type. How would I go about fixing this?
View 14 Replies
View Related
Feb 11, 2010
I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:
Code:
$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Here is information about the PCI devices available on the system:
Code:
$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
[code].....
View 7 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Nov 28, 2010
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
View 1 Replies
View Related
Jul 1, 2011
sent the following email to Broadcom [URL]. I'll post an update if I receive a response. The current Linux STA 802.11 driver causes my system to crash.I've verified this under Ubuntu 11.04 and Linux Mint 11(an ubuntu derivative). Oddly enough, everything worked find under Ubuntu 10.10. My chipset is the 4321, my CPU is an AMD Phenom II 920, and the motherboard is an ASUS M3A78-EM. I tried the STA driver that ships with Ubuntu as well as compiling the one at [URL], including the patch for kernel versions > 2.6.37.
I am confident that the linux driver is the problem. If I connect my machine to my router using an ethernet cable, everything works fine. Also, the wifi adapter works fine under Windows. The symptoms are that the wifi adapter appears to connect to my network correctly and works fine for short transfers. But when I try a larger transfer, such as a speed test or streaming an mp3, one of three things happens after about 5 to 10 seconds:
1) The screen remains in graphics mode but locks up, including the mouse pointer. No keyboard input has any effect.
2) The screen goes into text mode and repeats the following over and over: [435.610002] ehci_hcd 0000:00:13.2CI-DMA:Out of IOMMU space for 18 bytes.
3) The screen goes into text mode and prints what appear to be CPU register contents. I took a picture of this with my phone if it will help, but obviously the text is kind of hard to make out.
View 5 Replies
View Related
Aug 1, 2011
I've got a Broadcom 4311 card and since upgrading I can't connect to wireless. I went through the solutions in the sticky and I still can't connect, when I type lshw -C network I get:Quote:
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
[code]....
View 6 Replies
View Related
Mar 26, 2010
In my toshiba m900 with realtek wireless lan. i canot detect any network. should i see any network? i setup my access point using wpa2 in windows. how about the ubuntu 10.04? i mean do they support wpa2 and wireless issues?
View 9 Replies
View Related
Apr 6, 2010
I'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
View 8 Replies
View Related
Mar 31, 2011
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
View 4 Replies
View Related
Jul 9, 2010
I just got a new AZiO AWU212N 802.11n wireless usb adapter (linked below). One of the product reviews said that it works with Ubuntu if you upgrade to the .34 kernel so I thought it would be a good buy. I updated my kernel and Ubuntu detects that there is a wireless adapter, but doesn't detect any networks. My old wireless-g adapter can connect just fine, so I don't know what the problem is.
http://www.newegg.com/Product/Produc...82E16833340018
View 3 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
Feb 9, 2010
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system. I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
View 1 Replies
View Related
Feb 8, 2010
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system.
I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
View 4 Replies
View Related
Sep 12, 2010
I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
View 5 Replies
View Related
Mar 29, 2010
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
[code]....
View 2 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Apr 20, 2010
I am using fedora core 2. I used the oldest version of fedora just because im running only 1 system, my specification is: HP compaq PC,pentuim4, 512mb memory, 40gig hdd, Intel board. I have two units same spec..windows xp and the other one is fedora 2. The windows xp normally detect the lan card, but when I try to fedora2, I try to active it and seems no lan card detecting,. How to detect broadcom nextreme gigabit ethernet to my fedora 2 OS???
View 7 Replies
View Related
Sep 1, 2009
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
View 14 Replies
View Related
Sep 20, 2009
I installed broadcom 4322AG to my HP mini 2140, I restart the netbook but the wireless is not working.
[Code]...
View 14 Replies
View Related
Jul 26, 2011
I am using f15 in dell l502x and it cannot detect any wireless.
Code:
lspci|grep network
17:03:00.0 Network controller: Intel Corporation Device 008a (rev 34)
Code:
uname -r
2.6.38.8-35.fc15.x86_64
Code:
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0408:2fb1 Quanta Computer, Inc.
Bus 002 Device 003: ID 8086:0189 Intel Corp.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
I have installed broadcom-wl and (a)kmod-wl and my mobile broadband is detected and working (and also the wired connection).
View 6 Replies
View Related
Aug 7, 2009
sometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.
all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.
to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.
it may not be the most elegent way, but it worked for me.
hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)
View 4 Replies
View Related
Sep 19, 2009
This is my first post! I am a brand new Linux fan and am determined to understand how this system works! I am running Fedora 11. My wired NIC works just fine. I am having problems with wireless. I ran lspci -v to find my driver details, found it online and got it working so it would show up in the network configuration. I am having problems getting it to work from there. I am used to getting windows to install the driver and then being able to search for wireless networks. When I try to activate it i get:
02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. WL-138G V2 802.11g WLAN PCI Card
Flags: bus master, fast devsel, latency 64, IRQ 21
[code]....
View 2 Replies
View Related
Oct 30, 2010
So basically, complete linux noob here, dual-booted fedora 13 with windows 7, and fedora can't seem to detect either my wired or wireless, however i don't really care about the wired. After spending a few hours browsing forums and tutorials and the like, seems as if it is a driver issue, as in there is none. I have managed to find the files :
HTML Code:
broadcom-wl-5.60.48.36-1.fc13.noarch.rpm
kmod-wl-5.60.48.36-1.fc13.5.x86_64.rpm
[code]...
View 6 Replies
View Related
Jul 17, 2011
I just installed Fedora (15) for the first time. However I do not have a wired internet connection, and have the infernal BCM4312 and I understand the STA works with this (It has worked for me with other distros). In another thread, I read that I can download the relevant files (using another computer) from FedoraFusion, transfer them to the wireless computer and install.
View 9 Replies
View Related
Aug 25, 2011
This is my first time here and I'm very much a beginner to Linux. I installed Fedora 14 and found out I didn't have wireless. I found this beautiful guide online posted by Stoat:
[URL]
but unfortunately, I live in an apartment and can only get access to wireless internet. I hope I'm posting in the correct place. Anyways, this is my setup:
$ uname -r
2.6.35.14-95.fc14.x86_64
$lspci
Network Controller: Broadcom Corporation BCM43225 802.11b/g/n
View 2 Replies
View Related
Jan 29, 2010
How to detect a wireless LAN MAC address spoofing?
I am in an institution where we've got a wired and a wireless network, and almost every day i found a new and a strange MAC addresses in my network.
I know that because i've recorded all the MAC addresses which belongs to my network. More over, all the boxes have a fixed IP address.
So, how to detect the spoofing BOX(s) ?
View 8 Replies
View Related
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Sep 11, 2009
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
View 12 Replies
View Related
Dec 22, 2009
I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration
View 2 Replies
View Related
