Ubuntu Installation :: 11.04 Doesn't Detect Windows Xp?
Jul 6, 2011
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
I installed Ubuntu using Wubi, and the boot loader does not detect my keyboard. Does the windows boot loader only support PS2 keyboards? Would there be a workaround... like install DOS drivers for it? I have a logitech s520 keyboard.
When in Windows, I can select what OS to use, but is there a way I can select which OS to use while booted into Ubuntu? Is there a program that will let me modify the windows boot loader from within Ubuntu?
I've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
Upgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
I'm new to linux and having a lot of problem, and I would really apprecaite the help. It all started when I connected my laptop to an LCD. Since then, my system doesn't detect its own screen. So I have to escape as the start of reboot and go to a recovery mode and select failsafe screen. Ubuntu then set to lowest graphic mode. It's no way to keep a set up for the long run. I've tried to reinstall Ubuntu from a CD but that doesn't work. .
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
I have just suscribed into this forum. I have a problem: my notebook (NOTEBOOK SATELLITE L300-SP5917A - INTEL CORE 2 DUO T6400 (2.00 GHZ - 2 MB L2 - 800MHZ FSB) - 15.4 WIDESCREEN TRUBRITE TFT LCD - 400 GB SATA 2 .5 5400 RPM - 3GB PC2-6400 DDR2) doesn't boot ubuntu after the last security upgrade. I have wubi installed.I have Windows Vista and Ubuntu in the boot menu. I select "Ubuntu" and that leads me to the GRUB shell. I'm new in linux. It seems that GRUB doesn't detect the kernel. Maybe the file menu.lst has been deleted, or something similar, but I can't make my ubuntu to boot.
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
Using install disc burned from ubuntu-9.10-desktop-amd64.iso ; disc verified. Could not install because installation hung during partman. Booted into LiveCD (using same disc), and GParted works, but partman does not.
I've searched Google and this Forum with no luck; but perhaps I'm just not asking correctly. Any help - even a workaround Is there a way to use something other than partman, or to mount the root, home, and swap in a way that makes partman skip it during install?
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I'd like to have a dual-boot system with WIN7 and Ubuntu. I already have Windows 7 installed. I tried the 9.10 installation but the partitioner says i don't have any Operating Systems installed. I read a few threads about this type of issue and i didn't find any solution. Then i found a discussion saying that there is a problem with GRUB2 in 9.10 and that the problem is not present in 9.04. Then i tried the installation with 9.04 but got exactly the same problem: the partitioner does not detect Windows 7. Basically i have this system:
- Windows 7 Professional x64 - 1 TB HDD with 4 partitions with 100Gb each (NTFS) - ~600 GB unpartitioned free space - Processor Intel Core 2 Quad Q8200 - ASUS P5Q MOBO - ATI Radeon HD 4550
I tried both the x32 (i386) and x64 (AMD) versions of 9.10 and the x64 version of 9.04. I don't have the WIN7 partition that some installations seem to have, at least i don't see it under Disk Management (Computer Management).
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
I installed maverick meerkat but for some reason there was no install to free space option so I installed onto 32gb of my 170gb windows vista installation. I NEED THAT INSTALLATION. Maverick Meerkat cannot detect my windows installation!
I've installed the last year ubuntu 8.10 on dual boot with winodows XP, but then I had to format the XP so I lost the dual boot and access to ubuntu and I used only XP...Now, I downloaded Xubuntu 9.10, when I was trying to install it, when preparing the disks a message tell me that the PC has no operating system, then when I choose to manually partion the disk, xubuntu does not read the different partition I'm having and just display the hole disk as free space
i did a fresh install of 10.04 on my asus 1005ha netbook (first-gen 1005ha, if it matters), and it works great. However, grub does NOT detect my windows partition. In gparted, the partition is recognized as "unknown". I can't mount it in ubuntu.
This is what fdisk gives me:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
My windows 7 is not corrupted. it is also not virus-infected. I know what i am doing, and i know my windows is fine. it has been running fine prior to installing ubuntu. I'm just saying this becuz i noticed that viruses are a common response to similar problems like this.
I'm trying to install Ubuntu 11.04 alongside Windows 7, but when I boot from the CD, Ubuntu refuses to detect the presence of Windows 7. I tried unplugging all my external hard drives to see if that made a difference, but Ubuntu still can't tell that I have Windows 7 on there.
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this: - is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or - did I do something wrong in the install process? or - is this some weird bug manifesting itself?
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
I had vista installed, then I installed Win7 on a dif. partition. Then I installed Ubuntu 11.4 over the vista partition (formatted first), and now I can't get into Win7. I'm really at a loss. I've tried the Win7 disk, and it doesn't detect the Win7 installation. I've also tried sudo update-grub, and it doesn't seem to detect the win7 install either. I've tried making the Win7 partition bootable using gpart as well. I'd like to dual boot Win7 and Ubuntu, however I need to do that.
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
I have a little problem. As soon as I boot my computer, Grub gives me an error 17. It happened after I tried to resize my Windows partition with a program. I have a dual boot between Windows 7 and Ubuntu 9.04.I've tried everything I could find on this forum and on the rest of the internet, but nothing was working. Most of them require a Windows CD (god knows where it is) or reinstalling grub and all that stuff, but it's all not working.I'm currently on a Ubuntu Live CD. Gparted doesn't detect any of my partitions, but just says 232 GB unallocated space. Palimpsest Disk Utility and the Explorer see all my partitions though EXCEPT my Windows 7 partition I tried to resize.
"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc. Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
I have several RHEL 5 installed on ProLiant DL380, they all can't detect the CD/DVD hard dirve when i insert the CD. Do you now why is that, how can i fix it?
Since I have upgraded to Ubuntu 10.04 Lucid Lynx, my second graphics card isn't detected by X server. When I do an lspci I get both listed though. I am using NVidia's driver v195.36.24
