Networking :: Puppy Doesn't Detect Wired Ethernet?
Jul 2, 2011
I've got Puppy Linux on a USB key, and yesterday, while I was on the internet with it, it hanged. I didn't know what to do, and I rebooted from the button (I now know what to do ). The problem is that, after rebooting, Puppy doesn't recognise the router. I've tried to apply the drivers that are on Puppy, but there aren't any compatible.
My router is a Xavi 7968 and my Network Card is:
NIC Fast Ethernet PCI Familia RTL 8139 from Realtek
(On Realtek's website, there isn't any driver linux-compatible)
View 7 Replies
ADVERTISEMENT
Jul 25, 2011
I have installed Ubuntu 11.04 using Wubi through Windows 7. It seems to be working but it will not connect to my wired internet connection. It tells me there is no wired connection, when there is. I used sysinfo and its not showing any network adapter or controller. I have a board with nvidia nforce go 430, could it be a driver issue. It works fine in windows though. Tried using a wireless adapter and all is working. But why doesn't the wired ethernet connection work.
View 9 Replies
View Related
Dec 19, 2010
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies
View Related
Mar 4, 2011
Just installed Scientific Linux 6. Does anyone know how to get it to connect to wired ethernet network?
View 3 Replies
View Related
Dec 2, 2010
I run Ubuntu 10.04 on a PackardBell laptop, with an Orange Livebox 2 providing ADSL. I am connected to the Livebox via WiFi, but I can't connect using the ethernet cable. I think that in making changes to the system some time ago I must have ruined something, but I can't work out what.
View 8 Replies
View Related
Jun 13, 2010
laptop: averatec 6200 series
ethernet driver: SiS 900
wirless lan driver: rt2500
I got 10.04 installed and running pretty well.I cant get the wired ethernet to work but the wireless works. i did the the command line
[Code]...
also, dont know if i matters but ive got 8mbps/1.5mbps cable (motorala surfboard cable modem) and a linksys wrt54g wireless router.
View 4 Replies
View Related
Jul 24, 2010
I have a HP Mini running Ubuntu Desktop 10.04, and I cannot get a wired connection to work. My network card is "Broadcom Corporation BCM4312 802.11b/g (rev 01)", and I have the restricted drivers for the card installed. Wireless works fine, though.
My /etc/network/interfaces:
View 4 Replies
View Related
Jan 3, 2010
Ubuntu and Xubuntu read my Motorola Surfboard SBV5120 cable modem via USB "out of the box"; Puppy LInux doesn't. The computer I've run them on doesn't support ethernet, so it has to be via USB. what can I do to get Puppy online?
Computer: Systemax
Processor: AMD athlon
Memory: 189 Mb
Hard drive: 40 Gb
View 1 Replies
View Related
Nov 30, 2010
Just noticed that auto connection to my wired ethernet is not being established after restarts I'm making. Never recall this in the past. I do get an auto connect when I shutdown and restart. I'm using 10.04 LTS Lucid Lynx.
Also have noticed that nearly every upgrade over the past week or so is calling for restart to complete the upgrade. Can there be any unwanted problems in doing several upgrades over a period of several days before doing the restart? I'd like to think not.
As you can imagine these two issues together are causing some lost time.
View 5 Replies
View Related
Jul 24, 2011
I have two laptops (Dell & Lenovo), both have wifi.
I am having one wired Ethernet connection.
I want to share this Internet connection among two system , to access Internet from both the system.
I had tried by creating a wireless network, but was not able to do so.
View 3 Replies
View Related
Jan 22, 2011
I have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.
View 5 Replies
View Related
Sep 7, 2010
I had windows and 8.10 earlier and now have single boot 10.04 !
1.) I can see wireless networks only after I am connected to the router through wired ! I guess its some thing to do with me activating ifup and ifdown, when my wired connection stopped working as i was trying to install wireless drivers.
2.) Even when I see wireless networks, i cannot connect to any of them.
I tried various things for a whole day trying to fix it and i doubt if i screwed up some thing that was running good.
View 6 Replies
View Related
Sep 1, 2011
my ubuntu can not detect my wired and wireless mini netbook is HP 100e and impressive is that in any way I can be connected
View 1 Replies
View Related
Apr 20, 2010
I am using fedora core 2. I used the oldest version of fedora just because im running only 1 system, my specification is: HP compaq PC,pentuim4, 512mb memory, 40gig hdd, Intel board. I have two units same spec..windows xp and the other one is fedora 2. The windows xp normally detect the lan card, but when I try to fedora2, I try to active it and seems no lan card detecting,. How to detect broadcom nextreme gigabit ethernet to my fedora 2 OS???
View 7 Replies
View Related
Jun 5, 2010
I have a Zotac Ionitx A-U. I can't get it to establish an internet connection with the wired ethernet within Ubuntu. The chip is detected, but trying to bring up the connection stalls out at trying to obtain a DHCP lease, like this:
DHCP DISCOVER ...
DHCP DISCOVER ...
No DHCPOFFERS received
Specs:
Ionitx A-U
Ubuntu 10.04 x64 kernel 2.6.32-22 (also didn't work in 9.10)
[Code]...
View 3 Replies
View Related
Jun 13, 2010
I acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.
View 2 Replies
View Related
Apr 16, 2011
I recently did some troubleshooting on a USB wireless dongle hooked up to my Mint distro. I need the USB wireless to access a home DSL wireless modem out to the Internet. The wireless DSL is on 192.168.0.1
I also have a 10/100 ethernet NIC in the computer, for non-wireless connections. The wired ethernet is all 192.168.1.1. I noticed in /var/log/syslog that there are numerous "DHCPDISCOVER on eth0 to 255.255.255.255 port 67" messages.
Since eth0 has a hard-coded IP, I dunno why DHCP is trying deal with it. Can I turn off DHCP activity against eth0? How to do that?
View 2 Replies
View Related
Aug 3, 2011
I've recently purchased a new laptop of ACER(aspire 5750). I've installed two OS(win-7 & ubuntu 10.04 LTS). Till now, on my ubuntu every things working fine except i can't able to access my cable model broadband.
I open up the "Network connections" section & at there i saw it can't able to detect any WIRED connection.
I've checked my all my ethernet jack & all rest of connection. All r perfect. But, don't know why it can't able to detect my broadband. But, in windows section, broadband is working fine.
NOTE: ACER aspire 5750 using Broadcom netlink 57785 gigabit ethernet PCIe
View 1 Replies
View Related
Nov 15, 2010
so, when i first got my laptop it came with vista and the ethernet worked fine, then when I decided to install Karmic about 9 months ago it still worked fine. After a while the update for lucid came out so I upgraded to that and then the ethernet started getting buggy. It would only work about half the time that i wanted it too and the other half of the time it would just stare at me and not move anywhere. So along with a couple other bugs I decided to format my harddrive and downgrade back to karmic and await the 10.10 release. unfortunatly my ethernet woes carried with me and they still would only show up on occasion. then about half way through my time with karmic round 2 it stopped altogether, and with the upgrade back to lucid it hasn't seemed to solve itself.
I ran through ifconfig -a, lspci and sudo ifup -a but they all tell me that the device doesn't exist.
View 6 Replies
View Related
Aug 1, 2010
I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
View 5 Replies
View Related
Oct 6, 2010
while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.
View 9 Replies
View Related
Dec 5, 2010
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies
View Related
May 1, 2010
After upgrading from karmic to lucid yesterday made my RTL 8111 -network card die. It's integrated on Intel D510mo mini-itx board.
dmesg:
Code:
After some googling I found out a lot of forumposts about the same problem from year 2007, but the troubles seem to disappear on the newer versions and seem to be back now? With those posts I managed to get the link up by using ethtool by setting autoneg off and setting speed to be 10mbps and half duplex. Any other speed/duplex combination fails.
One suggestion I found was to install r8168-driver from Realtek instead of the r8169. It didn't help, result was very much the same.
I booted to 9.10 live-cd and there the network worked as intended (100Mbps, I dont have a gigabit switch)
I really wouldn't like to fall back to 9.10, but my file server is not very usable with 10mbps.
View 9 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Oct 16, 2010
I bought a switch, connected it to our router,and moved the patch cords to the switch. All but one of the workstations connect & work fine. If I plug the non-connecting wire into my laptop it connects. If I plug the non-connecting wire back into the router,the workstation connects.So...it seems that this particular workstation will only see the address of the old router. It's stuck in there & won't refresh. Two of the PC's & the laptop are running 10.04 (Mint 9 Actually), and one has Windows XP on it.e problem is with one of the 3 10.04 boxesI have tried removing the power cord & MB battery and leaving them out over night.Also cleared the bios. Same results. Connects fine to the old router but will not connect to the new switch.
View 9 Replies
View Related
Apr 10, 2011
I've been struggling with this a bit now, and I'm not sure what the problem is. I have a laptop with a BCM4401 Ethernet card as well as a BCM4311 Wireless card. The wireless card works great out of the box, I'm able to connect with it perfectly. The problem is the ethernet card. Here is the situation: The NetworkManager menu doesn't list "Wired Networks" at all (ie. it doesn't say "not managed", it just only lists Wireless networks) Going into Network Connections, there is an "Auto eth0" entry ifconfig shows eth0 (which I assume means NetworkManager isn't managing eth0) I have edited /etc/NetworkManager/nm-system-settings.conf to say managed=true I have edited /etc/network/interfaces to remove any mention of eth0 (all that's left is the "lo" lines) So I'm not sure why eth0 is still showing up when I run ifconfig, and why Network Manager is not managing it. Any ideas?
Edit: Not sure what I did but now ifconfig spits out this:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:26:2c:60:75
inet addr:10.0.1.12 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:26ff:fe2c:6075/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
The MAC address of the "Auto eth0" entry is 00:1C:23:8F:D4:39, the same as the eth1 entry that ifconfig spits out.
View 5 Replies
View Related
Jan 31, 2010
I recently got a cable modem from Comcast, and connected a Belkin F5D7230-4 wireless router to it, then connected my computer and an Xbox 360 to the router with ethernet cables.
My computer dual-boots Ubuntu 9.10 and Windows 7. In either operating system, the wireless connection is flawless. In Windows, so is the wired connection. But in Ubuntu, there's a lot of trouble with the wired connection -- specifically, while I can connect to the router and to the Internet, and while I can use ping, dig, traceroute, etc., to verify connections to remote hosts, Web browsing, or anything else that uses http, works only for a few Websites, and then only erratically.
I don't believe it is a DNS problem -- testing with ping, dig, etc., demonstrates that, and I have also tried using alternate nameservers. I also don't believe that it is an issue with IPv6, as I've tried the fixes usually suggested, including editing the grub configuration to disable IPv6 support in the kernel and verifying that IPv6 was inactive. I've also tried using local dns servers such as pdns-recursor. None of these things seemed to help.
Also, perhaps unrelated, but disturbing: my computer has locked up a few times while testing the wired connection, and I had to use a hard reset to restart the computer.
View 1 Replies
View Related
May 4, 2010
I installed Ubuntu10.04, It cannot driver Wired network and wireless. Later I installed linuxMint9, wireless is ok, but wired network doesn't work. I am sure the lan cable is ok. It works in Windows.
View 3 Replies
View Related
Sep 18, 2010
I recently tried out OpenDNS on my wired connection, however after it was slower than faster, I tried going back to the original settings that the connection had (so basically to Automatic DHCP).
For some reason the connection wouldn't connect again. So I thought I'd try deleting that connection and creating a new one, but this still doesn't work. When I try to connect using NetworkManager it just does the 'loading' icon for 30ish seconds then says disconnected.
My wireless still works fine however.
I'd very grateful as i'm worried i've messed up the ethernet port and I need it for when I got University in a couple of weeks
View 1 Replies
View Related
Jan 9, 2011
I just finished installing Ubuntu 10.10 64bit. During installation Ubuntu was connected to the network and was downloading updates. After rebooting though, it cannot connect to the network.
View 1 Replies
View Related
