Red Hat :: RHEL 5 Doesn't Detect CD/DVD
Feb 24, 2010I have several RHEL 5 installed on ProLiant DL380, they all can't detect the CD/DVD hard dirve when i insert the CD. Do you now why is that, how can i fix it?
View 1 RepliesI have several RHEL 5 installed on ProLiant DL380, they all can't detect the CD/DVD hard dirve when i insert the CD. Do you now why is that, how can i fix it?
View 1 RepliesI have a rocketraid 2640x4 with 2 500gb HDDs configured in my system. I also have a 3.5" usb floppy disk plugged in with the SCSI drivers When I boot the RHEL 5.5 x86 32 bit installer, i type in "linux dd" at the first screen. Then it asks me to load my drivers via the floppy disk which i do. When i get to the installation page of Linux after entering my serial key, it is not able to detect my HDD so i am unable to proceed. I have tried using drivers for RHEL 5, 5.1 and 5.2. There are no drivers for 5.5.
View 9 Replies View RelatedMy little 40 GiBs hdd is kind of small by current standards. When I start running out of space, I always wondered what else I could do with those hundreds of music videos? Put 'em on dvd!
But 11.3 doesn't detect the dvd-rom, much less the disc. 11.4 did and the sound was much better than with my other Linux os. How can we fix this?
what will i do? so that i can install ubuntu on that partition?
View 2 Replies View RelatedI just purchased a Logitech ClearChat Comfort USB Headset. It works fine in Windows but unfortunately the same can't be said for Linux. It doesn't even seem to be detected as when I use the command cat /proc/bus/input/devices I get
I: Bus=0003 Vendor=0b38 Product=0003 Version=0110
N: Name="USB-compliant keyboard"
P: Phys=usb-0000:00:1d.2-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input0
U: Uniq=
[Code]....
I checked Volume control and I have Headphone checked, and in switched Headphone is also checked. Actually... Maybe it is being detected... In the Device dropdown menu in Volume control I see "Logitech USB Headset". I checked that and the volume is turned up, speaker and microphone are selected in preferences... Sound is still coming out of my monitor's speakers though.
Debian Jessie does not detect one of my monitors (I have two) when I use the default drivers (nouveau) for my NVIDIA graphics card. It does work when I install the proprietary drivers, but then, after a couple of reboots, I get many problems (when I log in, it does not manage to load the desktop environment). I've tried this a couple of times unsuccessfully.
How to make the machine recognize the dual screen with the default drivers?
Upgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
[Code]...
I installed sun-java6-plugin and copied the symlink of /usr/lib/jvm/java-6-sun/jre/plugin/i386/ns7
[Code]...
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
View 2 Replies View RelatedI have a little problem. As soon as I boot my computer, Grub gives me an error 17. It happened after I tried to resize my Windows partition with a program. I have a dual boot between Windows 7 and Ubuntu 9.04.I've tried everything I could find on this forum and on the rest of the internet, but nothing was working. Most of them require a Windows CD (god knows where it is) or reinstalling grub and all that stuff, but it's all not working.I'm currently on a Ubuntu Live CD. Gparted doesn't detect any of my partitions, but just says 232 GB unallocated space. Palimpsest Disk Utility and the Explorer see all my partitions though EXCEPT my Windows 7 partition I tried to resize.
View 1 Replies View RelatedI can connect to the internet using wvdial but NetworkManager is a no-no. Here is some information that's relevant:
Code:
# lsusb | fgrep Huawei
Bus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
[code]....
"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
[code].....
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies View RelatedI tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
View 5 Replies View RelatedI just installed gtkpod in order to access my ipod through fedora. The problem I face is that sometimes gtkpod detects the ipod and works fine. But sometimes it doesn't detect it at all. And in spite of clicking lots of times on Load iPod(s) button, it doesn't load the iPod. How can I get this working?
View 1 Replies View RelatedI am running Fedora 13 with the nvidia blob for OpenGL hw acceleration, everything x86_64. I have spent a couple of days trying to get either Morrowing (TES3) or Oblivion (TES4) working under wine, unfortunately without success.
I have tried several flavors of wine: 64-bit wine from the fedora 13 repo, 32-bit wine from the fedora 13 repos, 32-bit wine 1.3.2 built from source. In all cases, running either of the games I get the same error (using WINEDEBUG=+d3d): "Direct3D requires OpenGL support." Appareantly wine d3d layer can't access to the nvidia OpenGL driver, and therefore d3d is disabled within wine -- making the two games not to start up.
I have tried looking around for a solution, but in all cases I found the root of the problem was missing OpenGL support / missing drivers. This is not my case; I use OpenGL everyday, and hardware acceleration is clearly supported in my configuration (confirmed with `glxinfo | grep direct`).
I think that wine might have problems accessing the 64-bit ogl drivers, but I don't know how to confirm it, and even less how to solve it. Clearly, installing Windows is not an option
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
Since I have upgraded to Ubuntu 10.04 Lucid Lynx, my second graphics card isn't detected by X server. When I do an lspci I get both listed though. I am using NVidia's driver v195.36.24
View 1 Replies View RelatedI'm trying to hook up my TV to my MacBook1,1 laptop running the Lucid Lynx Beta. The TV is connected to the laptop via a mini-DVI to DVI-I adaptor, which is connected to a DVI-I to video adaptor, and this is connected to the TV via a component cable.
Under OS X, after plugging in the mini-DVI cable, the TV automatically becomes a secondary display for the laptop (extending the current screen), so from a hardware perspective everything seems ok. Under Ubuntu, plugging in the mini-DVI cable elicits no response from XRandR whatsoever (xrandr -q reports DVI1 disconnected both before and after). URandR and the regular "Detect Displays" button in the "Monitors" preference app do nothing. The laptop has an Intel GMA 950 chipset, and the Intel driver is running successfully (Compiz works fine). I have a clean xorg.conf (generated by X -configure), except for the addition of "Virtual 2048 2048" in one of the SubSections of the Screen section. I'd be happy to post the full xorg.conf if it would be useful.
So far I have tried xorg.conf tweaks, and I have followed instructions to manually tell xrandr to output to DVI1 as described in the comment by Marko Mikulicic here.
I'm running 10.04 on a Radeon HD 4650 card with fglrx. The driver installation went without a hitch, and the log file contained no errors.
When I try to run
Code:
aticonfig --initial
i get the response
Code:
Found fglrx primary device section
Unable to find any supported Screen sections
Running
[Code]....
My best guess is that I have to write an Xorg.conf file, in which I say what type of monitor I have.
I cannot do that, as I need to shut down the Xserver in order to make it generate my xorg.conf file. When I shut it down I get the black screen.
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies View Relatedi'm using a dell n5010 recently i installed ubuntu9.10 in my laptop and it doesn't seem to detect wireless connections, so, i googled it and downloaded a driver from broadcom and tried to install it as per the authors instructions and nothing seems to work well, the broadcom drivers are not detected in the additional drivers and when i try to install linux-wlan-ng tarballs it doesn't seem to work even, though i have gcc(i think thats it), so, i installed my windows driver through nsdgtk but it says that it is "unable to see if hardware is present" but, when i click ok on the error the wireless network applet says the hardware is present and when i click the network configuration tool it gives the error message "could not find a network configuration tool" and after configuring my network with network tools in administration it says "no wireless extensions" when i type 'iwconfig' and there is no ip address when i type "ipconfig".
View 9 Replies View RelatedI've been trying to revive my old Acer Aspire 3680, which is supposed to have Acer InviLink 802.11b/g Wi-Fi CERTIFIED solution, supporting Acer SignalUp wireless technology, as shown is in Specification.The system simply doesn't detect Wi-fi and I don't know how to make it work.
View 9 Replies View RelatedI just installed Fedora 12 from a DVD . The process completed without incident.
I then inserted a DVD into my internal drive and nothing happened.
I then logged out and logged in again as root, and tried again-same result; nothing!
Could it have something to do with the new PolicyKit? I didn't have this problem with Fedora 11.
I am running 10.04 and don't know how to "add" my Motorola razor cell phone so I can download my pictures to my p.c.
View 1 Replies View RelatedI've got Puppy Linux on a USB key, and yesterday, while I was on the internet with it, it hanged. I didn't know what to do, and I rebooted from the button (I now know what to do ). The problem is that, after rebooting, Puppy doesn't recognise the router. I've tried to apply the drivers that are on Puppy, but there aren't any compatible.
My router is a Xavi 7968 and my Network Card is:
NIC Fast Ethernet PCI Familia RTL 8139 from Realtek
(On Realtek's website, there isn't any driver linux-compatible)
I've got a problem on Slackware64 13.37, my sound is way to loud even on minimum settings, it just jumps from off to quite loud, this is not a hardware problem as when I use sound from my debian rescue partition I have full control, I have tried using alsamixer as well as the graphical volume control (I'm using xfce but a quick test on kde gives the same results), alsaconf doesn't seem to detect any sound cards, alsa mixer correctly identifies my sound card ( NVIDA ), been googling and searching these forums but all the sound problems seem to be about sound being to low or nonexistent.
View 14 Replies View RelatedI am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies View RelatedI am absolutely new to linux env. I have installed opensuse 11.2 with KDE desktop on my HP pavilion dv9700 Laptop. But I am having problem configuring my webcam. I have skype installed on my laptop and webcam is working OK with skype but when I run Opensuse program Digikam, it doesnt detect any camera.
View 2 Replies View RelatedI installed Ubuntu using Wubi, and the boot loader does not detect my keyboard. Does the windows boot loader only support PS2 keyboards? Would there be a workaround... like install DOS drivers for it? I have a logitech s520 keyboard.
When in Windows, I can select what OS to use, but is there a way I can select which OS to use while booted into Ubuntu? Is there a program that will let me modify the windows boot loader from within Ubuntu?