Since I have upgraded to Ubuntu 10.04 Lucid Lynx, my second graphics card isn't detected by X server. When I do an lspci I get both listed though. I am using NVidia's driver v195.36.24
View 1 RepliesI own an EeePC 701; right now I'm giving 10.04.1 a test run on it, using a live usb.
The EeePC has an Atheros wireless card, but live Lucid doesn't detect it. Here's the output from a ifconfig command:
Code:
Will the card be detected by a properly-installed Lucid? Is there some package I need to install so I can use wireless? Or should I steer clear of installing Lucid on my EeePC?
so, when i first got my laptop it came with vista and the ethernet worked fine, then when I decided to install Karmic about 9 months ago it still worked fine. After a while the update for lucid came out so I upgraded to that and then the ethernet started getting buggy. It would only work about half the time that i wanted it too and the other half of the time it would just stare at me and not move anywhere. So along with a couple other bugs I decided to format my harddrive and downgrade back to karmic and await the 10.10 release. unfortunatly my ethernet woes carried with me and they still would only show up on occasion. then about half way through my time with karmic round 2 it stopped altogether, and with the upgrade back to lucid it hasn't seemed to solve itself.
I ran through ifconfig -a, lspci and sudo ifup -a but they all tell me that the device doesn't exist.
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies View RelatedI just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code]...
I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration
View 2 Replies View RelatedI just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
I installed a sound card but when I go to System->Preferences->Sound and go to Hardware it's not showing anything at all. If I boot from the Live CD then it will show the card and it works. How can I make my Linux installation detect this card? I was thinking that I could somehow copy the necessary files from the Live CD to make this work, but maybe there's an easier way.
View 1 Replies View Related"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
[code].....
I have just install Redhat Enterprise Linux5, 2.6 kernel,Foxconn motherboard,model 45GMX-V but Linux did not detect the Onboard LAN card.Although when i use winxp it detects the card as RTL8139/810x.
View 4 Replies View RelatedI am running Ubuntu 9.1 on my Gateway M305CRV and love it . . HOWEVER:Less I am plugged directly into the internet with Ethernet cable . . I have not internet. I purchased this laptop just prior to when internal wireless cards/ modems were standard . . thus I have an external Dell brand (True Mobile 1300-802.11 b/g PC Card) wireless card.Ubuntu does not seem to automatically detect it and I dont see
View 2 Replies View RelatedWhile installing my redhat distro in VMware 6, its giving an error message that ethernet will be disconnected.
View 1 Replies View RelatedI have Backtrack4r2, and it did not detect my wireless card which is Intelpro 2200. I installed Windows wireless driver, after i installed the regular driver using wine, but it did not work.
module is not detected by linux No wireless extension. how can I install rhe driver where the card is not detected.
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies View RelatedI tried installing lucid puppy(lupu) in my pen drive using Universal-USB-Installer-1.8.4.0 but when i booted up using my flash drive the boot screen displayrd a message:
SYSLINUX 3.86 2010-04-01 CBIOS Copyright (C) 1994-2010 H. Peter et al
No DEFAULT or UI configuration directiove found!
boot:_
I also get similar message message when i try to boot from DSL BUt a few weeks ago when i tried lupu without formatting my flash drive(it had some stuff in it) lupu ran it said 5 seconds to boot an image come but nothing more it hanged up showing a black screen and a blinking under score symbol
I've try ubuntu lucid in DELL Inspiron, but touchscreen utilities is not run.
How can repair it.
I recently downloaded ubuntu 9.10. I have a dell d410 with a built in wireless card. It won't detect it, and I have no access to a wired connection for now.
View 6 Replies View RelatedJust like the title said it won't detect my wireless card. Anybody know what's wrong with it?
View 9 Replies View RelatedEver since I switched from windows I miss the fact that gaming is not all that well on linux. I think that is pretty unfortunate. The games I'd like to play are team fortress 2 and a bit of civilization 4. Luckily for me, these games are known to run good through wine. But the bad thing for me is that I had an old ATI card and I was stuck with the bad driver that caused all these games to crash. So I had it with this. Each time I wanted to play I needed to restart to windows. So I saved some money and yesterday I bought a geforce 640 GTX.
When I boot up the computer for the first time with my card it all seems to work well. It just did not detect my new card automatically. And now I have to confess I'm not all that experienced with ubuntu and getting some things done. But I thought, ah well.. 10.10 is coming up, lets update to the release candidate and see how things are going from there. A new card and new version of ubuntu, woohoo! Now after the update it did detect the driver and it seems to run pretty well, but I do have a few problems.
I have a small second screen to extend my primary desktop. In the NVIDIA X Server Settings and under the tab 'X Server Display Configuration' I have the second screen in 'TwinView' and it seems to work well. Untill I restart my screen that is. After a restart I have to keep activating my second screen. I was kind of hoping it'd save the settings.
The other problem is what I get when playing team fortress 2. I'm not sure this is the right place to ask here, or I should better head to the wine forums or something, but I do hope to fix this. When I have the second screen enabled, and I'd like to start team fortress 2 it gives a warning: 'Failed to create D3D devide'. Doing some googling, it seems to be a resolution problem. After I disable the second screen, it works again.
Then with the second screen disabled it seems to finally run. But unfortunately after 5/10 min the I get kicked out of the server with the message 'Disconnected: Client timed out'. I did some googling arond and there's not much results relating to wine/ubuntu, but most windows users seem to have this problem because of a firewall. Now, I'm using ubuntu and not using a firewall as far as I know (there's probably some build in, I just take that as it is ). But maybe anyone here knows how to fix this and I do get to finally play team fortress 2 on ubuntu?
I installed Ubuntu 10.4 some time ago but it does not detect any audio card. I checked via terminal with the aplay -l command. how to install the audio card?
View 1 Replies View RelatedUbuntu doesnt detect my graphics card. Ita an pciE card.
View 8 Replies View RelatedI've got a TV card installed on my machine, an Intel Celeron wht a 2.4GHz processor, 1,5GB RAM, 80GBx2 Seagate hard drives and two DVD writers, an LG and a BENQ.
I'm currently watching TV using the TV card on Windows. It's working well. I DO NOT LIKE WINDOWS!! I've been on Ubuntu Linux for the past 3 and a half years! Beautiful! My TV card name is:
OCEAN TV MAGICIAN PT218 TV Card.
My Ubuntu 9.04 cannot see it. I kindly ask for advice on how I can configure it to work on Ubuntu 9.04.
what will i do? so that i can install ubuntu on that partition?
View 2 Replies View RelatedI'm on an HP Pavillion dv4-1125nr with a Broadcom BCM 4312 network card.
I only have Ubuntu 10.04 installed on this computer.
ifconfig reports:
Code:
eth0 Link encap:Ethernet HWaddr 00:1e:ec:b5:b4:85
inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21e:ecff:feb5:b485/64 Scope:Link
[Code]....
It isn't even detecting the wireless card, and the network manager will only let me connect to wired networks (I'm connected to my router via ethernet cable right now).
I've pressed the LED killswitch but it does nothing (doesn't change from orange to blue nor does it have any noticeable effect on the network manager or the reports of the above 2 commands).
I own a ubuntu-server (2.6.35-22-server x64) - a home router / NAS / etc assembled at the mini-itx motherboard with no attached keyboard / display.The problem is that the system does not detect the occurrence of SD-card in a USB-card reader. Card reader is normally detected and visible in the system.When I insert SD-card in cardreader, in "dmesg" and, accordingly, "udevadm monitor" does not display any events.If reboot with connected SD, everything works fine, but, of course, there is no event when removing SD.On the forum topics if problems arise, it is only with automounting. But it's not. I do not have events from kernel, that he discovered the SD-card.In the desktop version there is no problem.I installed the generic kernel; comparing kernels configurations for desktop/server versions, comparing the output "udevadm monitor" at the time when I inserted the SD-card on desktop/server, etc. - useless.I don't have more ideas. I don't understand something. Probably there is no package.Almost ready to give up, put the desktop version and delete unnecessary.On desktop versions missing events displayed as follows (the output "udevadm monitor" when inserting SD-card):
Code:
KERNEL[985153522.094479] change /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host4/target4:0:0/4:0:0:3/block/sdf (block)
[code]....
I have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies View RelatedUpgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
[Code]...
I installed sun-java6-plugin and copied the symlink of /usr/lib/jvm/java-6-sun/jre/plugin/i386/ns7
[Code]...
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
View 2 Replies View Related