Ubuntu Installation :: Cannot Reinstall - System Doesn't Detect Its Own Screen ?
Jul 12, 2010
I'm new to linux and having a lot of problem, and I would really apprecaite the help. It all started when I connected my laptop to an LCD. Since then, my system doesn't detect its own screen. So I have to escape as the start of reboot and go to a recovery mode and select failsafe screen. Ubuntu then set to lowest graphic mode. It's no way to keep a set up for the long run. I've tried to reinstall Ubuntu from a CD but that doesn't work. .
I've been trying to revive my old Acer Aspire 3680, which is supposed to have Acer InviLink 802.11b/g Wi-Fi CERTIFIED solution, supporting Acer SignalUp wireless technology, as shown is in Specification.The system simply doesn't detect Wi-fi and I don't know how to make it work.
My monitor is the hp pavilion f1703. The 9.10 only offers 2 resolutions 800 x 600 (4:3) and 640 x 480 (4:3)The native screen resolution is 1280 x 1024 @ 60Hz which is obviously not offered. I did my homework and followed this guide found here http://www.ubuntugeek.com/how-to-adj...on-ubuntu.htmlall i got was 'xrandr:cannot find mode 1280x1024' when i try to set the resolution manuallyThe weird thing is ubuntu 8.10 detects my monitor native screen resolution just fine.
I've just installed 10.4 and it works like a charm. The only problem I have is that I've plugged my ipod touch 3g in and nothing happens. It seems like the system doesn't detect it. Opening rhythmbox nothing happens either.
Do i need to do any extra thing in order to have my ipod working?
The only thing I can see in the syslog is this message:
I first installed asterisk using sudo apt-get install asterisk on ubuntu 10.04. After doing this the SIP packages did not install for some odd reason.I uninstalled asterisk using sudo apt-get remove asterisk then reinstalled and now none of the asterisk config files are gone. deleted all files and directories I could find relating to asterisk, rebooted the machine, did a kernal upgrade, and a package update and reinstalled asterisk using sudo apt-get install asterisk, and all the config files are still missing. What am I missing here!
I'm trying to help my dad, who's recently got a computer that had Ubuntu 10.10 preinstalled. After some problems while I wasn't in a position to help out, I think a reinstallation is necessary. But when I make a USB drive to install it from, it only has .exe files, and nothing Ubuntu can use, so it doesn't boot on startup (even though it's set to boot from USB first) and it can't be run later either. This happens when I download the ISO from the main download page on the Ubuntu website, so is there a link to download one without Windows files?
Upgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
I am running Windows XP Pro SP3 and it is currently setup on a system running 2 SCSI drives with an adaptec 2940 UW (non RAID) PCI card both are 18.4 GB. Windows XP is installed on the first one and I am trying to install Ubuntu 11.04 onto the second, but the installation doesn't recognize that windows is installed on the first drive and only gives me that drive as an option to install... Gparted recognizes both, one as an NTFS file system (sdb) and the second as a unpartitioned drive (sdc) and for some reason is placing the usb drive as sda which i'm assuming might cause some issues with grub boot loader later on after the drive is removed. what might be causing this issue and how i would go about fixing it... should i just go to 10.04 and upgrade to 11.04 after?
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
I have recently found out (also in this forum), that my motherboard is simply put: "junk" (as it fails to see the 8Gigs of ram i have). So i will buy another mobo and would like to hear from you if I should reinstall my ubuntu from scratch or try to just run the same OS as i have now (I know, in the MS world this would mean utter chaos and mobo/processor/ram/everything damage - smoke from the machine etc. So: How safe is it to "hot swap" hardware under Ubuntu?
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
I have just suscribed into this forum. I have a problem: my notebook (NOTEBOOK SATELLITE L300-SP5917A - INTEL CORE 2 DUO T6400 (2.00 GHZ - 2 MB L2 - 800MHZ FSB) - 15.4 WIDESCREEN TRUBRITE TFT LCD - 400 GB SATA 2 .5 5400 RPM - 3GB PC2-6400 DDR2) doesn't boot ubuntu after the last security upgrade. I have wubi installed.I have Windows Vista and Ubuntu in the boot menu. I select "Ubuntu" and that leads me to the GRUB shell. I'm new in linux. It seems that GRUB doesn't detect the kernel. Maybe the file menu.lst has been deleted, or something similar, but I can't make my ubuntu to boot.
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
Using install disc burned from ubuntu-9.10-desktop-amd64.iso ; disc verified. Could not install because installation hung during partman. Booted into LiveCD (using same disc), and GParted works, but partman does not.
I've searched Google and this Forum with no luck; but perhaps I'm just not asking correctly. Any help - even a workaround Is there a way to use something other than partman, or to mount the root, home, and swap in a way that makes partman skip it during install?
Don't know if there's going to be much anyone can do but I just installed UNR to my Acer and did an update, restarted it and it went blank screen for ages, and the hard drive light went on, I assumed this was a crash so re-started the computerTried turning it back on and it again had a blank screen, no HD light, tried again same, took battery out and did the same (this has worked previously with Limpus) and no luckI don't even get to the BIOS menu.
I can't get Ubuntu to reinstall on my computer... I recently reformatted and re-installed windows and I think that might be the problem because I was running Ubuntu 64-bit before I reformatted... Now the problem I am getting is when I go to boot up Ubuntu to finish the install it loads on the purple screen with the Ubuntu logo then goes into a black screen with white letters. Its the screen that tells you to reboot and go into windows a run 'chkdsk /r' and reboot again, the problem is I have followed those directions 3 times and it didn't work, I don't think the operating system really knows what the problem is.
i use Fluxbox (Mint in Karmic, but after few tweaks and updates i have to reinstall system-but i couldn't even make with gparted and usb-creator startup disk, so i used virtual machine in Mac OS to make some older version (Mint 7 XFCE).BUT, then i discovered that i can not even load the system from USB-although it was all set in bios to startup with USB Stick. How can i persuade my dell mini 10v to start up from live USB Stick.
I am starting to have lots of unusual problems show up on my Ubuntu 10.04 install, missing Icons for the Volume Slider, Email Icon, and a Error mounting Static on startup (because I plugged in my Smartdisk FDUSB-TM2 Mitsumi Model #: D353FUE) and it is trying to mount as SDC instead of as a USB Floppy Drive.....and it DOES NOT work as a USB Floppy Drive on 10.04.REF:[URL] I have my system set up as follows:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
If I boot from the LiveCD again, and Install again from the LiveCD, will all my installed software still be functional, or will I have to re-install, and repeat everything I have done to build my system to date since my system is on / and is a separate partition?
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
My computer is a netbook with no optical drive. I had a friend bring over an external CD drive to burn the live CD, but I don't have that now. Since then, I've messed up my install beyond easy repair, so I was wondering if there was a simple (or perhaps not so simple) command that would reinstall every package from the software repositories (I do have access to the Internet, just no GUI). I'm talking about a clean install here.
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
The program tripwire suggest a reinstall in single user mode before you set up its database. So you can be sure there is nothing scary on the computer to start with.I've tried doing this by a rather crude and direct method
Code: for i in `cat /home/lugo/listOfInstalled.txt`; do apt-get install --reinstall --yes "$i"; done
I am running Ubuntu 10.10 and I have been keeping it updated via update manager.Last night the update manager popped up and I selected to update all required updates without checking what the updates were.While shutting down I noticed that I needed to reboot to complete the update, so I rebooted.After reboot the wireless network card disappeared. So I moved the PC and plugged in the ethernet cable. Oddly sometimes it shows disconnected for no reason and I have to reboot.What's even worst is that Ubuntu now locks up completely within 15 minutes of a reboot.None of the alt+sysrq commands do anything!How do I find out what the updates were and is there any way to I revert my system back to pre updates without having to reinstall?
Ubuntu wont detect my screen (mag bf22) correctly..that causes poor resolution (1152*864 max) my screen is able to at least a 1600*1200 resolution (witch i use in my windows boot ) is there anything i can do in order to fix or increase the resolution ?.. i have already installed the drivers correctly
asus p7p55d intel core i5 750 nvidia geforce 9500gt wd640GB black caviar
I installed Ubuntu a while ago now and I like it but when I installed it I removed windows and now its starting to annoy me. I cannot sync my ipod touch, I can't play some of my games because they are all meant for windows and wine does not work for then so what I want to do is uninstall ubuntu and reinstall windows xp, then I will reinstall ubuntu and this time around I will make a dual boot. Only one problem, I don't know how to uninstall ubuntu.
My Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this: title System Restore root (hd0,2) chainloader +1 boot
This points to a partition which, when mounted, has this stuff in it: bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says: Boot Error Is there a log or something that might give me more info about the error?
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this: - is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or - did I do something wrong in the install process? or - is this some weird bug manifesting itself?
