Fedora Networking :: Network Manager Doesn't Detect WiFi Card?

Dec 22, 2009

I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration

View 2 Replies


ADVERTISEMENT

Fedora Networking :: No Wifi Option In Network Manager

Feb 22, 2011

I just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.

PHP Code:

View 7 Replies View Related

Fedora Networking :: Orinoco Silver PCMCIA Wifi Card Doesn't Find Any Networks In F11

Sep 21, 2009

I have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.

My laptop is HP nx6110 if that matters.

Here is the situation:

When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.

If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).

In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:

It seems that the card is detected right.

Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.

I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.

No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.

Tried to find (and reinstall) drivers:

Code:

No Matches found

Code:

Here is the output of lspci. The output is the same if the wifi card is connected or not.

Code:

LAN connection is working just fine.

View 3 Replies View Related

Fedora Networking :: 3G Dongle Doesn't Appear In Network Manager?

Jan 20, 2009

I have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.

I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.

I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.

View 14 Replies View Related

Fedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work

Nov 22, 2009

I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:

pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type

Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.

View 2 Replies View Related

Ubuntu Networking :: Way To Ban A Wifi Network In Network Manager

Oct 26, 2010

My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?

View 4 Replies View Related

Fedora Hardware :: Wireless - Network Manager Does Not Indicate Any Wifi Network

Oct 20, 2010

I happened to Fedora 13 that the network manager does not indicate any wifi network and I had to turn off the notebook for a while and then recover, this also happened to me 2 or 3 times on ubuntu 10.04 too. my card is an Atheros AR5007EG.

View 2 Replies View Related

Ubuntu Networking :: Can't Connect To Wifi Using Any Network Manager

Dec 26, 2010

i was fed up after i can't connect to wifi using ubuntu. the problem happened after my router is being replaced to a new one because the old one got struck by lightning. good thing i dual-boot my laptop so i can access the internet using Windows 7 now.

i use the default network manager to connect to wifi before, but it all seem to be failed after the replacement of router. i also used Wicd but it failed to connect either. it says in the notification "disconnected: bad password" but the password was right. my wifi used WEP password with open authentication.

i even remove the WEP password and try to connect, but it failed. all i can do is to boot in windows 7 and surf internet there. what could cause this problem? is it the router, the telephone line? i can set the router settings if i want, but i don't know what causes the problem.

View 1 Replies View Related

Ubuntu Networking :: Network Manager Keeps Dropping The Wifi Signal?

Dec 12, 2010

I've got a Belkin F5D8055 v1 wifi usb adapter. I use the rt2800usb driver for it. Strangely it uses only 54 Mbit/s instead of 300 Mbit/s. I thought it was ok, since I use the wifi only for accessing the internet. However, the network manager keeps dropping the signal, and I can't understand why. I'm close enough to the router.

iwconfig:
wlan0 IEEE 802.11bgn ESSID:"MyHomeRouter"
Mode:Managed Frequency:2.447 GHz Access Point: 00:22:2D:06:2C:50

[code]....

View 2 Replies View Related

Ubuntu Networking :: Get The Asus N13 WiFi To Be Controlled By The Network Manager App

Mar 11, 2011

I have eventually (a week's work) got my Ubuntu 10.04 to recognise my Asus N13 WiFi dongle (had to compile the source from Ralink with the "y" against the two things it tells you to if you want network manager to work (source that came with dongle wouldn't compile) and then set up rules (for some reason the driver - rt2870sta - wouldn't recognise the dongle until the rule about the vendor and product ID was in place; and the drivers that come with Ubuntu wouldn't recognise it even with the rule in place)).

Big thank you to chilli555 for all of the posts that got me this far.I would like to use the Network Manager app that comes with Ubuntu, to control the dongle. At the moment it will aknowledge when the driver has been loaded (have to do a modprobe), but does not "see" any of the many WiFi routers around my house, so I can't click on one to select one.

My only guess on this is that, to get the dongle to work I copied the config file that is part of the driver source files into /etc/Wireless/RT2870, and this is getting in the way. However, I have tried removing it and the network manager still doesn't work. Or is it because the network manager needs the dongle to be called "wlan0" and it's called "ra0"? If so, can you aliase this?

View 3 Replies View Related

Ubuntu Networking :: Gets Internet Connection Via WIFI Using WICD As Network Manager?

Jul 7, 2011

I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?

View 3 Replies View Related

Ubuntu Networking :: 10.04 Can't Find Network Manager To Enable Wifi Adaptor?

Jul 19, 2011

I just installed 10.04, just migrating to linux. I can't see the network manager anywhere. I have the applet installed. I can't get the wifi adapter enabled. The chipset iwl8345 shows on the output when I run config. It seems to me that I need to get the NM up and that should doit. here is ishw:

ubuntu@ubuntu:~$ sudo lshw -C network
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation

[Code]....

View 9 Replies View Related

Ubuntu Networking :: 10.10 - In Network Manager Can View Wifi Networks Fine But Cannot Connect

Apr 28, 2011

I have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.

lspci

Code:

Code:

Code:

I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it.
I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.

I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.

View 2 Replies View Related

Ubuntu Networking :: Broadcom Network Card - WiFi Light Stays On All The Time ?

Dec 13, 2010

I installed Ubuntu 10.10 amd64 online today. I was using 10.04 32-bit before, and the network drivers were easy to find and install. Ubuntu did the job for me and they worked flawlessly. It was a relief I didn't need to search around.

Even though 10.10 (64bit) found the drivers for me, both ethernet and wireless, they do not seem to be working alright. I installed both, made a restart. I found that the WiFi light on my laptop stays on, even if the wireless network is turned off using either the key combination (Fn+F2), or manually turning it off.

Issues with the ethernet? I am right now using ethernet but it does not care to detect the connection. Empathy won't connect automatically as a result- says no network connection. But here I am, posting this. Evidently, there is a connection, right?

Issues with the wireless? The WiFi light stays on all the time, and it isn't able to get hang of the connection I have at home. It just won't show any wireless connections available. When I tried to connect by giving it the SSID and the encryption type and password, it didn't work. Just kept asking for the password again and again (I have checked with the router- the password is correct).

View 2 Replies View Related

Ubuntu Networking :: Network Manager Running Only It Doesn't Now?

Apr 22, 2010

I had network manager running on my netbook karma install, but when I installed VNC as another display, logged into that other display and accidentally clicked on not to run network manager on startup cause there is already one running, it screwed up the network manager auto startup on my normal netbook display.I tried adding it back into auto start in settings but that has not worked.As always, thanks for any help you can give me getting this to auto start again on login, without deleting my kde cache(cos it is setup the way I want it).

View 3 Replies View Related

Debian :: WICD Network Manager Does Not Detect Any Network / Resolve This?

Jan 16, 2011

I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.

View 4 Replies View Related

General :: Ubuntu Lucid Doesn't Detect My Second GPU Card ?

Aug 31, 2010

Since I have upgraded to Ubuntu 10.04 Lucid Lynx, my second graphics card isn't detected by X server. When I do an lspci I get both listed though. I am using NVidia's driver v195.36.24

View 1 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Seem To Be Able To Use Modem To Connect To Internet

Feb 9, 2010

I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.

View 9 Replies View Related

Ubuntu Networking :: Network Manager Icon Doesn't Show Wireless APs?

Feb 10, 2010

I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected

View 1 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Show Up In Notification Area

Jun 8, 2010

im just getting the hang of ubuntu 9.10, and then all of a sudden 10.04 comes over and screws everything up with the upgrade. i did the upgrade, and now the network manager wont show up in notification areas. any clue as to why? help is greatly appreciated. also, my machine does register that the drivers for wireless card is installed, and when i run lshw -c net command with sudo priveleges, it says it can detect networks, so im confused as hell.

View 9 Replies View Related

Ubuntu Networking :: NFS Doesn't Mount Correctly - Network Manager And Upstart

Sep 25, 2010

I have the following problem: There are three NFS mounts in /etc/fstab, which are automatically mounted. The network connection runs over NetworkManager. Since NWM brings up the network asynchronously, NFS doesn't mount correctly on the first try, but is loaded soon enough since mount automatically retries until it works.

I can live with the fact that I have an error in my boot messages, since everything is up in time for the user. But, I need a (selfmade) upstart script which depends on the NFS mount being up. Even using "remote-filesystems" as the trigger doesn't help, because the trigger is apparently sent after the first failed try (I checked with cat /proc/mounts in my script, the nfs mounts are clearly not up.) Can I somehow force the remote mounts to wait until NWM is up, or make the NFS mount emit an event when the mounts really get mounted?

View 6 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Recognize Nas0 Interface?

Dec 23, 2010

Network manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).

View 1 Replies View Related

Ubuntu Networking :: IPhone Tether And Network Manager - Doesn't Connect

Apr 2, 2011

This is on Lucid, using a Dell Mini. I installed the required packages for a USB tether to my iPhone. Network Manager recognized it immediately as wwan0, but it doesn't connect. Also, it never asks me for the password to connect to the Personal Hotspot (as it does when I can connect from Windows).

View 3 Replies View Related

Fedora Networking :: F14 Does Not Detect Onboard LAN Card (DH67BL Intel Mother Board)

Apr 24, 2011

I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.

View 5 Replies View Related

Debian Installation :: Installer Doesn't Detect Ethernet Card

Dec 19, 2010

I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?

View 14 Replies View Related

Ubuntu :: Live Lucid Doesn't Detect Wireless Card ?

Sep 10, 2010

I own an EeePC 701; right now I'm giving 10.04.1 a test run on it, using a live usb.

The EeePC has an Atheros wireless card, but live Lucid doesn't detect it. Here's the output from a ifconfig command:

Code:

Will the card be detected by a properly-installed Lucid? Is there some package I need to install so I can use wireless? Or should I steer clear of installing Lucid on my EeePC?

View 4 Replies View Related

Debian :: BCMxx - NetworkManager Doesn't Detect Wireless Card

Jul 14, 2010

I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.

[Code]...

View 8 Replies View Related

Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies View Related

Ubuntu Networking :: Wireless Network Doesn't Work With A TPLink PCI Card?

Jun 26, 2010

I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:

Code:
$ sudo iwconfig wlan0 essid "apoint" key s:my_key_8
this error is returned:
Code:
Error for wireless request "Set Encode" (8B2A) :

SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.

View 2 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet With Reliance Netconnect Data Card Using Network Manager

Jan 22, 2010

I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved