i can't connect to my wireless network (wpa psk) with ubuntu 11.04 and my wifi card Intel 3945 ABG. i've done some search on the forums here and none of the workaround i've found works.
Code:
root@razor:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"
[code].....
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies View Relatedworking to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
Windows crashed yet again so I thought I'd switch to Ubuntu. Install of 9.10 went flawlessly, everything looked great and worked perfectly. Next day after restart the wireless wouldn't connect. I looked around for solutions and used a wired connection to install wicd and suddenly wireless worked again. But next day after restart wireless wouldn't connect again -
I keep getting a popup asking for my WPA key despite the fact that I know the key is entered correctly. I decided to install 10.04, thinking maybe that would help. It didn't look like wireless was working but after a restart it worked and it worked again after another restart! Fantastic! But today, I'm back to square one. Using Windows again.
TL;DR - Wireless won't connect to the network which it can definitely see - repeatedly presents "Enter WPA key" prompt despite key being correct and wireless working flawlessly under Windows.
1. Machine Brand and Model
Dell M65
2. Wireless Brand, Model and Wireless Chipset
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
[Code]...
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
I have an Intel 3945ABG WiFi card in my Laptop (Dell Inspiron 6400). The problem is that I'm not able to get my card detect the Wireless Network. I'll list the prolem more specifially below. O.S. Fedora 12 x86-64
1. The Network Icon on the Taskbar (is it what it is called here in Linux??) shows Wireless is Disabled under the Wireless Networks. Wired Net works fine.
2. If I goto System->Pref->Network Connection the Network Tab is empty.
3.Under System->Admin->Network Config I can see two Devices; one is eth0 (active) with a checked check box. Second is wlan0 which is Inactive and has a checked Checkbox. The Activate and Deactivate buttons are disabled for both these. If I go and see in the Properties of the wlan0 it says controlled by Network Manager checked but the Network Manager comes up empty.
4. This forces me to remove that "controlled by network manager box" which enables the activate and deactivate buttons. Now I can Activate my wlan0 adapter and the light on the Laptop for WiFi starts up. During startup (activation I get this error in the pop-up box:
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument.). But the popup eventually closes auto. The Network Config box now shows it active but the Taskbar Icon still shows Wireless is disabled. And still the Network Connections has an empty box under Wireless tab. I donno what to do next. The card worked fine with Ubunto 9.04, openSuSE 11.2 (both 32 bit btw) and Fedora 11 again 32 bit.
A couple of weeks ago, I installed kubuntu 10.10 on my laptop and my wireless card has not worked ever since. It was fine under 10.04.lspci:
Code:
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
[code]....
fresh install of 10.1 on an older sony laptop wireless icon is on the toolbar, and my router is listed icon has a red exclamation mark my wireless button on the laptop is set to "on" dmesg | ndis reports "wlan0: link is not ready"
View 4 Replies View RelatedI have installed Ubuntu x86 10.04 LTS onto an old Dell machine which is connected to my broadband modem and Netgear Wireless Router (WGR614 v6). The router is encrypted with 64-bit WEP and allows my System76 Pangolin Performance laptop to connect flawlessly out of the box. However, my sister runs Windows XP Professional 32-Bit on a Dell Latitude D830. This machine's wi-fi card is an Intel PROSet Wireless which recognizes the router but can't access it.
What should I do on her laptop in order for her to access the wi-fi router?
I'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.
iwconfig:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
[Code].....
how to make intel 3945 to work on RHEL5 ? Apparently that hardware is not officially supported by Red Hat so they do not provide drivers. what happens on my PC is after login I do not have the wireless card led is off and when I try to start the wireless connection I get
SIOCSIFFLAGS: No such file or directory
I'm not a real linux expert but I do use it since long time.
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
View 9 Replies View RelatedSorry people if here is not the right place to post this message. I've seen lots of people with problems in the wireless but not exactly mine. Well, the problem is, I can see all the networks around me, but I can't connect to them. when I click on my wireless network to connect, it stops when is getting the ip (from the dhcp server in the modem) and it doesn't connect, doesn't show any message, anything.
But different as I've seen from another posts my K/Ubuntu don't freeze. When I was with Kubuntu 10.08 everything was working but now I am using Kubuntu 11.04 on the same notebook, HP Pavilion dv6 and the wireless not connect. lspci -nnv | grep Wireless 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
I had to send my laptop back for repairs, so I have an older Dell 1720 laptop that I threw the Hard Drive into, similar specs, just the wireless card is different. So what i need to do is somehow activate the driver for the Intel 3945 wireless card in this dell laptop.
View 2 Replies View RelatedI want to inject my card (Intel pro 3945 ABG) by using ipwraw-ng-2.3.4-04022008.tar.But I got a problem during the installation that driver.I want to use the driver in BackTrack4. But I can't connect to internet with BackTrack4, so I download it from Window 7 and copy to my thumb drive, and past to the desktop of BackTrack4.
Then I open terminal, decompress the tar file.
Another folder(ipwraw-ng) is appear on the desktop.
Then I change to the "ipwraw-ng" directory (cd /ipwraw-ng)
Then I compile with command (make) and the error start.
It shows error like below
[Code]...
Alright this is my first post on here and I hope I got sufficient Information for you available. I ran Ubuntu based Distros before but this is the first time under a Debian based Distro for me. I got a newlaptop and this one does not seem to let me get my wireless to work after multiple efforts
My problem: My Intel Centrino N-6300 () does not seem to find any network connections.
My previous attempts: (Some of which required me to reinstall Suse)
1. I installed new kernels as my first assumption was that the kernel was not supporting it. I know now that it is supported.
2. I installed drivers from http://intellinuxwireless.org/ which was pointless.
3. I installed backports (THat was still under Linux Mint. Same problem there.)
4. I tried NDiswrapper without success.
5. I checked rfkill as you can see further down below.
Alright here are some of my info's I have collected so far. Let me know if anything is missing.
RFkill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code].....
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies View RelatedI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
trying to connect wireless on wlan0 intel pro wireless 4965 AG or AGN
View 1 Replies View RelatedI can't get my card Intel Wireless 5300 AGN to work. I'm running Slackware 13.1 and it's a full, fresh install.I get to show up with lspci -v:Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection...But it will not show up with 'ifconfig' which will only list the local loopback (yes we have have a eth problem as well but one thing at a time).
View 5 Replies View RelatedHow do you set wireless speed in natty? I've tried
Code:
sudo iwconfig wlan0 rate 54M
but nothing happens. I've tried this with wireless enabled and disabled (using network-manager), with and without the module loaded (ath9k) and using the solution provided in some forums (adding the command in /etc/rc.local and in a script in /etc/network/if-up.d) but to no avail... link speed always shows up as 65M.
I just updated my work laptop to Natty: perfect. My home server: perfect. My oldish home laptop: no more wireless. [I use wicd instead of Knetwork (or whatever it's called) because I want a permanent connection no matter the user]
I have a D-Link DWA-645. I get the whole stage: connecting, authenticating, etc... and bad password at the end. The password is correct (hasn't changed during upgrade). I also tried disabling WPA and it still won't connect. That's wlan2.
I also tried with an older PCMCIA card that _used_ to work on ubuntu 9, but stopped on version 10: a D-LinkDWL-G650. It doesn't even show up as wlan0 as it used to. I also tried with a USB-wifi DWL-G122 which has always worked on every version of Ubuntu [I don't normally use it because it's not practical on a laptop]. I see it as wlan1, but same thing: won't connect. Note that like with wlan2 I can scan for networks and see several around. For instance:
Code:
$ iwconfig
IEEE 802.11bg
ESSID: off/any
Mode: managed
Access point: not associated
Tx power: 20 dBm
Retry long limit: 7
[Code]...
[Edit]
Some more info: the access point works fine, I can connect with another device. The driver in use by Ubuntu is ath9k. Using KnetworkManager instead of wicd doesn't change anything.
Got Ubuntu 11.4 installed on my Lenovo Thinkpad X220.Except very very rare cases i'm not able to establish awlan connection.Scanning is possible at all times, monitor mode works as well.Network Controler (lspci)
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
[code]....
I recently upgraded from Maverick Meerkat to (classic) Natty Narwhal Ubuntu Linux. I am running on a Toshiba Satellite A665 (Intel i7). I use a wireless internet connection. Under Maverick, I had no issues. Under the update, I am finding that occasionally things stop working: The indicator Applet looks fine, but from a terminal, I find that I am no longer able to ping my own router (less than 10 feet away.) This behavior occurs after working fine for a few hours. I am unsure if anything in particular triggers it (I will report back if I determine a particular cause). I have a few other computers (2 running Windows, and the other Maverick Meerkat) -- and they are unaffected. Turning wireless off and on resolves the issue for me on Natty. Rebooting also works. Here's some hopefully relevant technical details about my system:
Code:
~$ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]...
I'm using an Atheros ath9k wireless card that has been pretty stable since Ubuntu 9.04. I did a clean install of Natty and ever since my wireless connection has been pretty unstable.
It doesn't actually disconnects but I lose all connectivity. The wifi card continues loaded with a static IP Address assigned to it but I cannot connect to anything. The only way to fix it is restating the network manager and I have to do it at least a couple of times every day.
I tried to whitelist ath_pci on /etc/modprobe.d/blacklist-ath_pci.conf but the problem still persists. Also yesterday I enabled the ubuntu backports on my software sources but so far no kernel updates.
Here are some of the messages filling up the logs:
I added all this info to this bug as well: [url]
Installed Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies View RelatedI recently installed the latest version of Kubuntu in a dual boot system with Windows XP on a Dell laptop. The dell laptop has a broadcom wireless device, and I was able to set up the driver and get wireless working. Then I booted into windows XP to make a whole bunch of updates/driver installations, and when I booted back into Kubuntu it would not connect to the wireless network. I am pretty sure the device is still active, because it picks up on the wireless networks in the area. But KWallet does not open to ask for my password on booting. Something is not set right, but I can't tell what.
View 1 Replies View Relatedjust installed Ubuntu 11.04 x64 on my Samsung R580 and cannot get the wireless to work/detect any networks around me (it looks like its on though at least as far as the indicator lights show on the notebook). I tried search around a bit and wasen't able to find anything...
View 1 Replies View Relatedhave read [URL] lspci | grep Wireless 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02
[Code]...
have read [URL] but still could not issue the problem how should I resolve my wireless isusues?
in short : installed 9.10 on a dell inspiron 600m which has a broadcom bcm4401 ethernet and an intel PRO/Wireless LAN 2100 3B mini PCI. At this point, i'm not too picky about which one works (meaning neither of them currently work). nm-tool seems to pick up on both : the broadcom (eth0) is using the b44 driver, State is unavailable; the intel (eth1) is using the ipw2100 driver, it's State is disconnected.
i have encryption turned off, and the wireless sees a number of AP's (including mine).
i'm jumping off the good ship m$ and determined to make this work!