how to make intel 3945 to work on RHEL5 ? Apparently that hardware is not officially supported by Red Hat so they do not provide drivers. what happens on my PC is after login I do not have the wireless card led is off and when I try to start the wireless connection I get
SIOCSIFFLAGS: No such file or directory
I'm not a real linux expert but I do use it since long time.
i wanted to learn linux, so i just installed Centos on a thinkpad x200. my wireless will not work. when i try to activate it i get this error:
Determining IP information for wlan0...SIOCSIFFLAGS: No such file or directory
SIOCSIFFLAGS: No such file or directory
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]....
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies View RelatedA couple of weeks ago, I installed kubuntu 10.10 on my laptop and my wireless card has not worked ever since. It was fine under 10.04.lspci:
Code:
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
[code]....
i can't connect to my wireless network (wpa psk) with ubuntu 11.04 and my wifi card Intel 3945 ABG. i've done some search on the forums here and none of the workaround i've found works.
Code:
root@razor:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"
[code].....
working to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
fresh install of 10.1 on an older sony laptop wireless icon is on the toolbar, and my router is listed icon has a red exclamation mark my wireless button on the laptop is set to "on" dmesg | ndis reports "wlan0: link is not ready"
View 4 Replies View RelatedWindows crashed yet again so I thought I'd switch to Ubuntu. Install of 9.10 went flawlessly, everything looked great and worked perfectly. Next day after restart the wireless wouldn't connect. I looked around for solutions and used a wired connection to install wicd and suddenly wireless worked again. But next day after restart wireless wouldn't connect again -
I keep getting a popup asking for my WPA key despite the fact that I know the key is entered correctly. I decided to install 10.04, thinking maybe that would help. It didn't look like wireless was working but after a restart it worked and it worked again after another restart! Fantastic! But today, I'm back to square one. Using Windows again.
TL;DR - Wireless won't connect to the network which it can definitely see - repeatedly presents "Enter WPA key" prompt despite key being correct and wireless working flawlessly under Windows.
1. Machine Brand and Model
Dell M65
2. Wireless Brand, Model and Wireless Chipset
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
[Code]...
I have a problem when a try start my wireless card broadcon 4303, i receive this message.
SIOCSIFFLAGS - no such directory
I use centos 5.2
kernel 2.6.18
I am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.
Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.
Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).
Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.
have read [URL] lspci | grep Wireless 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02
[Code]...
have read [URL] but still could not issue the problem how should I resolve my wireless isusues?
I'm trying to start using Debian Squeeze 64b on my laptop, which is Dell Latitude D830 with Intel i965GM.
After Debian installation, when system should display some nice background and window which please me to log in, I see my screen gets blank, fuzzy, blank again, ...and after several times finaly all hangs. Surprisingly mouse pointer is displayed nicely and works. I can't use network on Debian becouse of windows authorization program which i can run in wine on KDE. This works on Kubuntu.
What I did already:
I installed KUBUNTU 10.04 LTS and it's doing job well.
I installed Debian Squeeze with options:
- enabled:base system, laptop
- disabled:graphical environment
After instalation I logged in on root account and did:
1. aptitude install xserver-xorg xbase-clients xfonts-base xterm
2. aptitude install kdebase kde-i18n-pl
3. aptitude install kdm
4. reboot
5. problem occurs
@2: Googling everywhere i found several installation guides pointing to instal pure KDE by installing kde-core package, but it seems Squeeze does not have it.
@3: Unfortunately this command did not install nor update anything.
All I want to do is to install pure Debian with xorg and kde core (not full kde package) for later customization.
I tried to:
- generate xorg.conf (X -configure) and place it at /etc/X11/
- use xorg.conf working for other people in web.
- dpkg-reconfigure xserver-xorg
- googling & forum search for my specific problem and for errors found in syslog; with no working solution.
I have an Intel 3945ABG WiFi card in my Laptop (Dell Inspiron 6400). The problem is that I'm not able to get my card detect the Wireless Network. I'll list the prolem more specifially below. O.S. Fedora 12 x86-64
1. The Network Icon on the Taskbar (is it what it is called here in Linux??) shows Wireless is Disabled under the Wireless Networks. Wired Net works fine.
2. If I goto System->Pref->Network Connection the Network Tab is empty.
3.Under System->Admin->Network Config I can see two Devices; one is eth0 (active) with a checked check box. Second is wlan0 which is Inactive and has a checked Checkbox. The Activate and Deactivate buttons are disabled for both these. If I go and see in the Properties of the wlan0 it says controlled by Network Manager checked but the Network Manager comes up empty.
4. This forces me to remove that "controlled by network manager box" which enables the activate and deactivate buttons. Now I can Activate my wlan0 adapter and the light on the Laptop for WiFi starts up. During startup (activation I get this error in the pop-up box:
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument.). But the popup eventually closes auto. The Network Config box now shows it active but the Taskbar Icon still shows Wireless is disabled. And still the Network Connections has an empty box under Wireless tab. I donno what to do next. The card worked fine with Ubunto 9.04, openSuSE 11.2 (both 32 bit btw) and Fedora 11 again 32 bit.
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I had to send my laptop back for repairs, so I have an older Dell 1720 laptop that I threw the Hard Drive into, similar specs, just the wireless card is different. So what i need to do is somehow activate the driver for the Intel 3945 wireless card in this dell laptop.
View 2 Replies View RelatedI want to inject my card (Intel pro 3945 ABG) by using ipwraw-ng-2.3.4-04022008.tar.But I got a problem during the installation that driver.I want to use the driver in BackTrack4. But I can't connect to internet with BackTrack4, so I download it from Window 7 and copy to my thumb drive, and past to the desktop of BackTrack4.
Then I open terminal, decompress the tar file.
Another folder(ipwraw-ng) is appear on the desktop.
Then I change to the "ipwraw-ng" directory (cd /ipwraw-ng)
Then I compile with command (make) and the error start.
It shows error like below
[Code]...
I am trying to use JACK for some audio applications, but I have had no success until now I'am using Ubuntu 10.04 on my Dell Inspiron 6400. Kernel 2.6.32-33.
The following is the QjackCtl log:
p, li { white-space: pre-wrap; } 14:38:48.196 Steckfeld deaktiviert.
14:38:48.377 Statistik zurckgesetzt.
[code]....
my squid show like this when i try create swap directory
[Code]....
I cant install or do to work the compiz...
my driver is Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
what can i do to have all effects and working fine?
How to make the mics work on a Dell XPX M1330 laptop. This seems to be a common problem with built in mics on laptops. I've tried all the obvious things with alsamixer and pulseaudio.
View 1 Replies View RelatedI swapped the wireless card in my m6400 from a Dell 1510 (Broadcom) to an Intel 5300 and I am trying to get it working. Right now it's not coming up at all. This is a running install of Ubuntu, not a new install, prior to the HW swap the Broadcom worked OK. I've searched all over, but nothing seems to address the specific problem of getting this started.
The laptop is a Dell m6400 with T9800 CPU and 4GB of RAM running 10.10 (2.6.35-22-generic x86_64).
lspci:
Code:
wprecht@LWP-laptop:$ lspci
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
ifconfig and iwconfig
[Code].....
Devices are paired, sending files from laptop to phone no problem. I think, there is a problem with permissions to write into a public dir. Picture 1. Permissions settled for shared 'Public' dir. Picture 2. Grey-out options in Bluetooth 'receive file' dialog. What to install into system to resolve that issue? Or, is there another solution?
View 1 Replies View RelatedWireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
Ive been trying everything possible, and cant get this Intel card to connect. Here are the details Centos 5.5 Kernel 2.6.18-194.el5 Intel 82577LM Gigabit on dell laptop e6410 Broadband router with gateway 10.54.7.1 My network is 10.54.7.* linux sees the exact card in the configuration utility. If I choose dhcp, and try to bring up teh device, I get "no network, cable unplugged?" error If I configure static ip for eth0 like
10.54.7.2
255.255.0.0
gw 10.54.7.1
The interface will come up (seen in ifconfig) but cant ping the gateway. At one point it did work... I just cant get it back - Ive reinstalled like 4 times... in hopes Id catch something different, no luck. My network serices about 10 pcs many of them centos linux - no problem using static or dhcp with my router- I just got this new laptop and cant get ths card to work.
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running
rfkill list all
shows dell-wifi hard blocked no soft blocked no.
The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
i brought a new dell inspirion n4010 model..and i installed centos 5.5 but i cant connect to network..it showing like.
determining ip information for
etho...SIOCSIFADDR:no such device
etho:unknown interface:no such device
etho:unknown interface:no such device
failed.
have Unix and Windows experience. So will need some hand-holding.Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth
View 2 Replies View RelatedI have no wired or wireless internet after installing 10.04 on a dell e1505 laptop.
View 2 Replies View RelatedCan't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.