have read [URL] lspci | grep Wireless 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02
[Code]...
have read [URL] but still could not issue the problem how should I resolve my wireless isusues?
working to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
how to make intel 3945 to work on RHEL5 ? Apparently that hardware is not officially supported by Red Hat so they do not provide drivers. what happens on my PC is after login I do not have the wireless card led is off and when I try to start the wireless connection I get
SIOCSIFFLAGS: No such file or directory
I'm not a real linux expert but I do use it since long time.
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedI try to update my centos 5.2 to 5.3 but when run
yum update code...
A problem with installing CentOS 5.3 from DVD ...
I downloaded the CentOS-5.3-i386-bin-DVD.iso, after recording an image on DVD
Start the installation, selecting Installation Method, chose Local CDROM - Message on my screen: "CD Not Found"
P.S. md5sum matches with this website developer
What a problems?
How can I install ssh?
I tried following:
yum install openssh
The installation works fine and on the last line appears: Complete!
But openssh is not working:
I tried
ssh root@172.21.35.110
-bash: ssh: command not found
Have you any ideas? The ping works to this maschine.
I checked the rpm (thanks to pSchaff)
rpm -qa *ssh*
openssh-4.3ps-36.e15_4.3
openssh-server-4.3p2-36.e15_4.3
Do I need additional openssh-client?
I tried: yum install openssh-client but without success --> it appers "nothing to do"
One of my colleagues was working on my system (Centos 5.6). He deleted some files from the /tmp directory (he thought he was cleaning up files). Right after that, he rebooted the system. I now can no longer login.
Prior to this, here's what I see following a reboot code...
no matter what I use, I cannot login -- it takes me back to the (none) login: prompt
Any ideas? I know that deleting from the /tmp directory could lead to catastrophic results, but he thinks he only deleted a specific set of files.
I trying to install a webcamera (Genius Messenger 310), but i have can not
View 3 Replies View RelatedI am unable to boot my server and it is erroring with the message "Kernel panic - not syncing: Attempted to kill init!". Here are the details:
I have a brand new Dell PowerEdge T110 server with Quad-Core Xeon CPU and 2GB 1333MHz RAM. I have installed a hard disk (SATA, 7.2rpm) on this machine that I removed from another Dell PowerEdge T100 server with Dual-Core Xeon CPU that was running software RAID 1.
Now when I boot the new T110 server, it displays the following error messages code...
I am running CentOs v5.5 x86-64. If I put the hard disk back into T100, it boots fine. I do not know why it is not working with T110 server.
I am running a CentOS Server (v5.5 x64, with latest CentOS kernel)
The problem is that I cannot enable DMA on my boot drive. My boot drive is an IDE SSD. All my other hard drives are SATA:
/dev/hda = IDE/ATA
dev/sda - /dev/sdf = SATA
---
/dev/sda - /dev/sdd = RAID5 for storage
/dev/sde+/dev/sdf = RAID1 for storage
[Code]....
I'm running CentOS 5.5 with a hardware Areca controller (Raid 10). I initially installed a machine and rsynced the file system to a third machine; I'm then pulling in the file system to new machines and updating grub with a script to make it bootable.
I've done this before with other machines (no raid sets) but with these machines I'm running into errors code...
A couple of weeks ago, I installed kubuntu 10.10 on my laptop and my wireless card has not worked ever since. It was fine under 10.04.lspci:
Code:
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
[code]....
i can't connect to my wireless network (wpa psk) with ubuntu 11.04 and my wifi card Intel 3945 ABG. i've done some search on the forums here and none of the workaround i've found works.
Code:
root@razor:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"
[code].....
fresh install of 10.1 on an older sony laptop wireless icon is on the toolbar, and my router is listed icon has a red exclamation mark my wireless button on the laptop is set to "on" dmesg | ndis reports "wlan0: link is not ready"
View 4 Replies View RelatedWindows crashed yet again so I thought I'd switch to Ubuntu. Install of 9.10 went flawlessly, everything looked great and worked perfectly. Next day after restart the wireless wouldn't connect. I looked around for solutions and used a wired connection to install wicd and suddenly wireless worked again. But next day after restart wireless wouldn't connect again -
I keep getting a popup asking for my WPA key despite the fact that I know the key is entered correctly. I decided to install 10.04, thinking maybe that would help. It didn't look like wireless was working but after a restart it worked and it worked again after another restart! Fantastic! But today, I'm back to square one. Using Windows again.
TL;DR - Wireless won't connect to the network which it can definitely see - repeatedly presents "Enter WPA key" prompt despite key being correct and wireless working flawlessly under Windows.
1. Machine Brand and Model
Dell M65
2. Wireless Brand, Model and Wireless Chipset
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
[Code]...
I had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:
# yum --enablerepo=elrepo install kmod-r8168
The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).
First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):
# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up
Once I do this, I have network connectivity.
I have recently installed 11.04 on my ASUS EEEPC 900 and am having problems with getting the wifi enabled and able to pick up any signal. It has a broadcom device in there and although I have downloaded the patch that should be able to fix it Im unable to install it.
View 4 Replies View RelatedI am running 3 guest machines in KVM and also I have bridged the host machine so that I would be able to get the network access on the guest machines and I am getting it also, but the problem is that I am not able to ssh one guest machine from another guest machine moreover I am able to ssh the host machine from any of the guest machine.
View 1 Replies View RelatedI am using a Linksys WMP11 V27 pci card that supposed to be talking to a Linksys BEFW11S4 wireless router (802.11B) ...I am able to connect directly to internet (ethernet cable hooked to this wireless router) ... but for indepedence I need to go wireless.I defined the configuration using the Network Connections ... also through ndisgtk .. can't seem to get this two to consolidate.On /var/log syslog I see ....
an 22 14:27:10 ubucomputer NetworkManager: <info> Sleeping...
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): now unmanaged
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): device state change: 2 -> 1
[code]...
I'm trying to establish a connection to my ISP which uses PPTP protocol and a VPN server. The deivce I got from my ISP is a modem, not a router. The problem is my computer is unable to communicate with the ISP VPN server.
P.S Here are the instructions for Windows XP which work: http://portal.bnet.hr/ZG/windows-xp.htm
Here's what I have done so far code...
I have dual boot system and on windows I am able to connect to wireless but on Ubuntu I am not able to connect to wireless.
I desire to learn to trouble shoot the problem my self hence I would appreciate if some one guides me How to look for the problem.
and how to find what is wrong and right
That is why I am not posting any output here but rather would like to learn to solve the problem by myself
I reported recently that I have a problem connecting to a Windows network, and someone suggested upgrading to Ubuntu 10.4 I have done, and still have the problem.
The error message I get is: "Unable to mount location. Failed to retrieve share list from server".
I have setup an OpenVPN server on my server box, it had been working perfectly until today. It operates on port 1194 which I am now unable to connect to (tried telnet). I have checked all the firewall rules and they still allow the port and I have also checked to ensure that OpenVPN is still listening to the port, which it's not but I have tried restarting the service and the box which dosent make any difference. The only thing that has changed is that yesterday I installed Openfire, could this have broken something?
View 1 Replies View RelatedThe wireless on this computer has worked with Ubuntu just yesterday so I know all the drivers work. The trouble is that now the wireless is turned off and the hardware switch has no effect. Is there a way to force enable it through the terminal?
View 1 Replies View RelatedI can't connect to the Internet through my wireless card. Plus, it's disabled and I can't enable it. It's grayed-out in the Network Manager on the top panel.I ran this code in a terminal:
Code:
*****@ubuntu:~$ sudo lshw -C network
[sudo] password for ******:
[code]...
I am unable to connect to my wireless network. When I click on Network manager it says under wireless "device not managed".
View 9 Replies View RelatedI am using centos with two physical LAN cards. Some times one of our internet link goes down so the entire network stop. Now there are two different ISP internet lines coming into a single computer in their respactive lan cards for load balancing.
Kindly guide me that how can I enable Load Balancing in my Linux Box.
If one ISP goes down the load balancing server will use teh second one and vice virsa.
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
I have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?