fresh install of 10.1 on an older sony laptop wireless icon is on the toolbar, and my router is listed icon has a red exclamation mark my wireless button on the laptop is set to "on" dmesg | ndis reports "wlan0: link is not ready"
View 4 RepliesA couple of weeks ago, I installed kubuntu 10.10 on my laptop and my wireless card has not worked ever since. It was fine under 10.04.lspci:
Code:
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
[code]....
I have an Intel 3945ABG WiFi card in my Laptop (Dell Inspiron 6400). The problem is that I'm not able to get my card detect the Wireless Network. I'll list the prolem more specifially below. O.S. Fedora 12 x86-64
1. The Network Icon on the Taskbar (is it what it is called here in Linux??) shows Wireless is Disabled under the Wireless Networks. Wired Net works fine.
2. If I goto System->Pref->Network Connection the Network Tab is empty.
3.Under System->Admin->Network Config I can see two Devices; one is eth0 (active) with a checked check box. Second is wlan0 which is Inactive and has a checked Checkbox. The Activate and Deactivate buttons are disabled for both these. If I go and see in the Properties of the wlan0 it says controlled by Network Manager checked but the Network Manager comes up empty.
4. This forces me to remove that "controlled by network manager box" which enables the activate and deactivate buttons. Now I can Activate my wlan0 adapter and the light on the Laptop for WiFi starts up. During startup (activation I get this error in the pop-up box:
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument.). But the popup eventually closes auto. The Network Config box now shows it active but the Taskbar Icon still shows Wireless is disabled. And still the Network Connections has an empty box under Wireless tab. I donno what to do next. The card worked fine with Ubunto 9.04, openSuSE 11.2 (both 32 bit btw) and Fedora 11 again 32 bit.
i can't connect to my wireless network (wpa psk) with ubuntu 11.04 and my wifi card Intel 3945 ABG. i've done some search on the forums here and none of the workaround i've found works.
Code:
root@razor:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"
[code].....
working to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
I've got a Dell precision with Kubuntu 9.10. Wifi worked fine on that machine for months, but stopped working last week. I don't know what happened, but I recently did an "apt-get dist-upgrade". That might have something to do with it.
When I boot in Windows, wifi works fine.
Code:
tijl@Smaug:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 82567LM Gigabit Network Connection
[Code]....
Windows crashed yet again so I thought I'd switch to Ubuntu. Install of 9.10 went flawlessly, everything looked great and worked perfectly. Next day after restart the wireless wouldn't connect. I looked around for solutions and used a wired connection to install wicd and suddenly wireless worked again. But next day after restart wireless wouldn't connect again -
I keep getting a popup asking for my WPA key despite the fact that I know the key is entered correctly. I decided to install 10.04, thinking maybe that would help. It didn't look like wireless was working but after a restart it worked and it worked again after another restart! Fantastic! But today, I'm back to square one. Using Windows again.
TL;DR - Wireless won't connect to the network which it can definitely see - repeatedly presents "Enter WPA key" prompt despite key being correct and wireless working flawlessly under Windows.
1. Machine Brand and Model
Dell M65
2. Wireless Brand, Model and Wireless Chipset
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
[Code]...
my platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-9.201.4.1
sudo cp iwlwifi-6050-4.ucode /lib/firmware
sudo chmod 644 /lib/firmware/iwlwifi*
[code]....
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED
description: Wireless interface
product: WiMAX/WiFi Link 6050 Series
vendor: Intel Corporation
[code]....
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
how to make intel 3945 to work on RHEL5 ? Apparently that hardware is not officially supported by Red Hat so they do not provide drivers. what happens on my PC is after login I do not have the wireless card led is off and when I try to start the wireless connection I get
SIOCSIFFLAGS: No such file or directory
I'm not a real linux expert but I do use it since long time.
The past couple days I've been attempting to use ndiswrapper to connect to my home network wirelessly and have run into a slight problem. I'm able to install ndiswrapper (of course), and install the driver. ndiswrapper -l comes up good, showing the driver is in place for my netgear wg311v3 card.
modprobe ndiswrapper I am able to get to work without errors, except, when i type ndiswrapper -ma it writes another file to /etc/modeprobe.d/ndiswrapper causing the deprecation error.
The card scans for networks, and I'm able type in my encryption key.
However it doesn't connect. | grep comes up with the error that the wlan0 link is not ready.
I think I've also been able to determine that the configuration I've put in to the card through the network manager is not actually configured.
Anyone know how I could possibly connect with the card.. It seems it should be able to work. alias wlano is also in place.
I recently got a Tplink TL-WN321G wifi device for my fedora box. It has a Ralink chipset rt2870 in it.After messing it with couple of hours, i got it working with rt2800usb firmware, the LED is blinking on it and the device is listed in available...but its not scanning for available networks..lsusb:
Code:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
My installation has stopped detecting my wired network. Another computer connects fine with the same cable to the same access point. As far as I can tell it is simply behaving as if there was no network available from that cable but obviously there is. It was working a couple of hours ago, and I didn't install or uninstall anything, just shut down and booted up again.
LAN is enabled in the BIOS ifconfig does display eth0 ifup eth0 returns "Ignoring unknown interface eth0=eth0" in the output from dmesg:
"ADDRCONF(NETDEV_UP): eth0: link is not ready"
network appears in lshw and is not listed as disabled
I had to send my laptop back for repairs, so I have an older Dell 1720 laptop that I threw the Hard Drive into, similar specs, just the wireless card is different. So what i need to do is somehow activate the driver for the Intel 3945 wireless card in this dell laptop.
View 2 Replies View RelatedI want to inject my card (Intel pro 3945 ABG) by using ipwraw-ng-2.3.4-04022008.tar.But I got a problem during the installation that driver.I want to use the driver in BackTrack4. But I can't connect to internet with BackTrack4, so I download it from Window 7 and copy to my thumb drive, and past to the desktop of BackTrack4.
Then I open terminal, decompress the tar file.
Another folder(ipwraw-ng) is appear on the desktop.
Then I change to the "ipwraw-ng" directory (cd /ipwraw-ng)
Then I compile with command (make) and the error start.
It shows error like below
[Code]...
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies View RelatedI've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
[code]....
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
View 9 Replies View RelatedHave been using Ubuntu Desktop Amd64 for 6months, on a dual boot alongside Vista64. Since first installing the OS, I have switched over to Ubuntu & use Windows only for heavy multimedia edition & the occasional gaming.I just bought a netbook and installed Ubuntu 10.04 LTS NBR. Works great, except for wlan. No propriety drivers available for my Intel Wifi Link 1000BGN.
I've spent hours trying to install iwlwifi, but the process is somewhat complicted for a noob such as myself.After much reading and trying, I've managed to download and install iwlwifi-1000-ucode-128.50.3.1.tgz, (following the http://intellinuxwireless.org/?p=iwl...=howto-iwlwifi instructions)and am now working on installing the mac80211 subsystem (following the http://intellinuxwireless.org/?p=mac...howto-mac80211 instructions)When running
Code:
% wget
intellinuxwireless.org/mac80211/downloads/mac80211-10.0.4.tgz[/url]
[code]....
I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
as per pytheas22, i'm attaching few details here. my download speed would starts at 470 kB/s and gradually decreases until it reaches 116 kB/s. Loading web pages seems to be fine.
[Code]...
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
Intel wifi link 5100 not found on sony vaio backtrack 4 vmware I use vmware to load backtrack I have a sony vaio with 5100 AGN wifi card installed in it. I had tried anything to make my wifi work but always show no interface no wireless. I googled it for help for weeks and all i get was download the iwlwifi things and i already installed in it. i even tried many other thing
/etc/init.d/wicd start
/etc/init.d/networking start
and everytime i type ifconfig it just show eth and lo and no wlan0 in it everytime i type airmon-ng there are no chipset interface and ...........thing (forgot) I could find my wireless card name when i type ilg... something i forgot The problem is,i think my linux doesn't reconize the card even i have installed the driver Anything that i can do to make my linux reconize wifi link 5100 agn wireless card?
I have an IBM ThinkPad W700 running 64 bit Ubuntu 9.10 Karmic Koala. At the office I normally connect it to the Ethernet since it's never connected very reliably to the wifi there (drops out 2 or 3 times per day, usually at the worst possible time, of course), but it always worked just fine with Netgear WGR614v5 at home... until a week or two ago.
I used to be able to come home, take the laptop out of suspend mode, and it would connect to the wifi. Occasionally there'd be some hitch and I'd have to restart the network manager (sudo /etc/init.d/network-manager restart) but this was only sometimes, and when I did, it'd always work. But now, when I get home from work, I need to restart the entire system to get it to connect properly again. Without restarting the whole system, it either doesn't scan for wifi networks, it doesn't find any wifi networks, it keeps stuffing up my wifi password, or it connects and gets 0% signal.
Presumably, some driver was updated recently and it doesn't work so well. What's the easiest way to find out what drivers have been updated lately, and revert to a previous version? And what else can I try restarting so I don't have to restart the entire system? I've tried /etc/init.d/network-manager restart, /etc/init.d/networking restart, /etc/init.d/network-interface restart, and restart network-manager. I've also tried turning the wireless switch at the front of the laptop off and on, many times.
Code:
$ lspci -nn
[...]
03:00.0 Network controller [0280]: Intel Corporation Wireless Wifi Link 5300 [8086:4236]
[...]
$ ifconfig wlan0
[Code]...
The info above is when I've taken my laptop out of suspend mode and it won't connect to the network. lsmod doesn't say anything about wifi nor wireless; iwlist does see my network, which my older Januty laptop is connected to without drama.
I'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.
iwconfig:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
[Code].....
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?
View 5 Replies View RelatedI have a D-Link Air DWL-520 wireless card on my desktop computer. It runs well with Windows, but doesn't seem to work with Ubuntu. I am using Lucid Beta 2. I have tried googling, but have not come across any clear solutions on how to make it work.
View 1 Replies View RelatedIt worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.
View 1 Replies View Related