OpenSUSE Wireless :: Sager 8120 Intel Centrino N-6300 Not Connecting
Mar 5, 2011
Alright this is my first post on here and I hope I got sufficient Information for you available. I ran Ubuntu based Distros before but this is the first time under a Debian based Distro for me. I got a newlaptop and this one does not seem to let me get my wireless to work after multiple efforts
My problem: My Intel Centrino N-6300 () does not seem to find any network connections.
My previous attempts: (Some of which required me to reinstall Suse)
1. I installed new kernels as my first assumption was that the kernel was not supporting it. I know now that it is supported.
2. I installed drivers from http://intellinuxwireless.org/ which was pointless.
3. I installed backports (THat was still under Linux Mint. Same problem there.)
4. I tried NDiswrapper without success.
5. I checked rfkill as you can see further down below.
Alright here are some of my info's I have collected so far. Let me know if anything is missing.
RFkill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code].....
View 9 Replies
ADVERTISEMENT
Mar 3, 2010
To make Intel Centrino Ultimate-N 6300 wireless card work on ubuntu, you just need to download the firmware from here decompress it and copy the ucode in /lib/firmware. This works in jaunty. My laptop is a HP Elitebook 8440p.
View 2 Replies
View Related
Dec 30, 2010
I want to connect to a 300mbit network (802.11n). With Windows (the same Computer) I am able to connect with full speed, but with Ubuntu Maverick (64bit), and a lot of other distros I tested, I am only able to connect with 54mbit. The builtin wireless network card is an Intel Corporation Centrino Ultimate-N 6300 (rev 35). Is this a driver Problem? I updated to kernel version 2.6.37-rc2 via ppa sources, but with no luck. I tried to extract the windows driver and started it with ndiswrapper, but i properbly made somethng wrong, because the card did not show up, though ndiswrapper said adapter available... oO?
View 2 Replies
View Related
Jul 12, 2011
I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
View 3 Replies
View Related
Mar 9, 2015
I just installed jessie testing however the wireless card was not recognized, lspci says it's Intel Centrino Ultimate-N 6300.
View 3 Replies
View Related
Aug 11, 2010
I upgraded the wireless card in my laptop (sony VAIO CW) due to the original Atheros being incurably slow.The new card is an Intel 6300 ultimate n. In Windows 7, after installing the relevant drivers everything worked without a hitch.In my Ubuntu 10.04 installation, however, I have been unable to get it working.Initially I had the compat-wireless modules installed (linux-backports-modules-wireless-generic), as I had done so to try and get the Atheros card working better. I tried removing all of these, and that made the difference that iwconfig now (instead of nothing) listed
Code:
wlan1 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm
[code]....
View 1 Replies
View Related
Jul 17, 2011
I just got a new laptop equipped with some weird (at the present) hardware.
=> Intel Corporation Centrino Wireless-N100
=> Atheros Communication Device 1083
During the squeeze install no network harware was detected. (no wired, no wireless) On the net I read the wireless-N100 should be supported from the kernel 2.6.37 At last I tried Ubuntu 11.04 (LIVE) and the wifi was working. I also tried Fedora 15 (LIVE) and the wifi was also working. (kernel 2.6.38)But I want to stick to Debian (I am using it since Potato) What could I do to get at least the Wireless-N100 working ?
View 8 Replies
View Related
Feb 23, 2011
I have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
[Code]...
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
View 1 Replies
View Related
Feb 18, 2011
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
View 1 Replies
View Related
Dec 23, 2010
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies
View Related
May 6, 2010
I'm totally new in solaris and I want to hit it, can I install it in my laptop intel centrino core 2 duo (x86-32bit)
View 4 Replies
View Related
Aug 12, 2011
I just received a laptop hp Elitebook 8560p, i installed fedora 14 on it. Archi : Linux 2.6.35.13-92.fc14.x86_64. So I installed without probleme the ethernet driver e1000e, but the wifi become a problem ! The wifi card is an intel centrino advanced-n 6205 agn. So I google it like other people and i found this :
http://intellinuxwireless.org/?n=downloads I downloaded the iwlwifi-6000g2a-ucode-17.168.5.3.tgz and i copied the ucode in /lib/firmware and reload the iwagn with rmmod iwagn and modprobe iwagn as the link say.
It doesn't work, i tried with compat-wireless too, not succeed.I have any problem message in dmesg.
View 3 Replies
View Related
Jan 11, 2011
I had a problem with my laptop which is dell studio 1569 wireless card is as shown above intel centrino advanced n-6200. I had ubuntu before and it worked very well but with centos and oracle enterprise linux (not unbreakable) it does not work at all? And also the graphics card not fully configured I knew that when I tried an opengl apps?
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Dec 15, 2010
I have installed Ubuntu x86 10.04 LTS onto an old Dell machine which is connected to my broadband modem and Netgear Wireless Router (WGR614 v6). The router is encrypted with 64-bit WEP and allows my System76 Pangolin Performance laptop to connect flawlessly out of the box. However, my sister runs Windows XP Professional 32-Bit on a Dell Latitude D830. This machine's wi-fi card is an Intel PROSet Wireless which recognizes the router but can't access it.
What should I do on her laptop in order for her to access the wi-fi router?
View 1 Replies
View Related
Jul 6, 2011
i can't connect to my wireless network (wpa psk) with ubuntu 11.04 and my wifi card Intel 3945 ABG. i've done some search on the forums here and none of the workaround i've found works.
Code:
root@razor:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"
[code].....
View 1 Replies
View Related
Sep 27, 2015
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
Code: Select alluname -a:
Linux latitudeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Code: Select allip l:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
  link/ether 5c:26:0a:2e:c4:86 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
  link/ether 58:94:6b:b0:6a:2c brd ff:ff:ff:ff:ff:ff
[Code] ....
View 3 Replies
View Related
Apr 1, 2010
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies
View Related
Aug 9, 2011
My wireless card is:
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0083]
On Fedora 15, when I boot kernel 2.6.40, my laptop is unable to connect to my wireless-G AP. dmesg shows the following:
Code:
[ 43.866090] wlan0: direct probe to 00:27:19:14:c2:ca (try 1/3)
[Code].....
It works fine, however, when I boot using kernel 2.6.38 (from which I am posting) and in Windows. Also, I found some emails from the linux-wireless mailing list which appear to be talking about the same problem.
The system is fully updated. I've tried the 11n_disable=1 hint I came across on the ThinkPad wiki, but it didn't help. (I'm on an Asus K42Ja, in case it's relevant)
Although I'm fine with staying at 2.6.38 for now, are there workarounds/fixes for this?
View 7 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Feb 17, 2011
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
View 3 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Jul 3, 2011
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
View 1 Replies
View Related
Jun 6, 2010
The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Kernel driver in use: iwlagn
In terms of installed apps:
Code:
rpm -qa '*wireless*'
wireless-tools-30.pre8-5.1.x86_64
wireless-regdb-2009.09.08-2.2.noarch
[code]....
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
View 9 Replies
View Related
Feb 15, 2010
I made some tests with a router without security and my internet connexion worked without any problem. But if I activated the wep security (or wpa it is the same behaviour) suse 11.1 won't connect in any way.
I used knetwork manager and traditional ifup method, both failed to connect.
I saw, using iwconfig that in both cases (wpa or wep) I was associated with the AP but dhclient won't work in any way, I was always in the APIPA...
I checked if there weren't any access control (mac address filtering, ...) and all the settings in the router were off to give me full access. Including the firewall set to off. The DHCP feature was on in both cases.
I noticed that the firewall must be on in suse 11.1 otherwise I couldn't have any connections even if I disabled wep or wpa...
View 2 Replies
View Related
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Jan 24, 2011
I am facing issues in connecting to wifi after upgrading to 11.3 from 11.2. My laptop has Intel 5100 wireless. I had searched through the forum and did find some workarounds(like updating options.conf, removing /etc/NetworkManager directory, using ifup instead of network manager) but all those are not working for me. It will disconnect within a few mins after restaring network service. Has anyone heard about any fix from Intel guys for this and if yes then where can I get that? I had faced hell lot of difficulties while upgrading coz of many unresolved dependencies and don't want to go back to 11.2
View 4 Replies
View Related
Jan 30, 2011
I've tried really hard to avoid posting on here, but nothing that I've tried has worked. I just installed openSUSE 11.3 GNOME Desktop. It's my first time using openSUSE, but I do have a little bit of Linux experience. I have the following wireless network card:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) c:00.0 0280: 14e4:4315 (rev 01)
I switched control of network setup to YaST (Traditional Method with ifup). It installed the firmware automatically for me. I set up connection configurations as follows:
- Dynamic Address: DHCP
- Operating Mode: Managed
- Network Name: Hetts (I was able to scan and it found my ESSID)
- Authentication Mode: No Encryption (I was using WPA2 and having trouble so for now I've switched my router to use no encryption just to try and get something working)
After setting this up and clicking OK, it should automatically configure and connect, right? I've tried a bunch of things including rebooting and deleting the wireless card configuration and starting over by reinstalling the firmware. I've also tried setting up the connection using NetworkManager and still have the same problem. I have my laptop setup to dual boot, and when I boot in Windows, wireless works perfectly fine, so there is nothing wrong with my hardware or router. Here are some of the outputs I'm getting:
[Code]...
I tried adding the IP address manually too using "ip addr add ...", but still no connection. I can't even ping the access point at 192.168.1.1. Sorry for such a long post, but it seemed to be common for people to not post enough information, so I put as much as I could think of.
View 5 Replies
View Related
May 23, 2011
I just converted over from Ubuntu, and so am quite new to this new system architecture. Please give me just a little patience I just installed 11.4 on my EEEPC 901. All works great, except the RT2860 wireless, which will search and attempt to connect, but does not ever manage to connect. All updates were installed through Ethernet, and multiple access points have been tried. I also have tried open connection with no encryption.
View 9 Replies
View Related
Jan 20, 2010
on kde4 with knetworkmanager I cannot get past the wep security key on my home router. Every other wlan works, ethernet works, settings are definitely correct because it works with windows, other computers.And on the same computer even with gnome networkmanager! Also it used to work fine earlier. Behavior the same with different users including root, regardless of using kwallet or not. Networkamanager tries to connect and after one or two minutes throws the setting window back at me. I uninstalled and re-installed and deleted all related files I could think of. I even tried a complete fresh installation of opensuse only keeping the /home partition, so the problem must be lying there I guess. But then why all users?
PS opensuse 11.2
kde networkmanager 0.9.svn1043876-1.1.1
View 1 Replies
View Related
