Networking :: Fedora 13 Will Not Connect To Internet - Modem Is Visible With Dns Shown
Jan 4, 2011
I have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
i have 3 comps(running ubuntu 10.04) and a laptop(running vista sp2). i have installed samba on all ubuntu comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet.the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.all the systems have a static ip.
how to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
I am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
My router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
i have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
I am unable to connect to internet using my cell phone(sony ericsson X1i xperia). When i connect from wired internet it connects without a problem. What settings should i change/ programmes to execute? Thank u in unticipation
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial [sudo] password for chitra: --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATE0 --> Sending: ATQ0 OK --> Re-Sending: ATE0 OK --> Cannot get information for serial port ..... --> Initializing modem.
My internet is provided by a 3g modem usb. I am sharing the internet connection through my desktop into a router and then to the rest of my Ubunut machines. Currently if I want to file share I have to go into the network manager and change the eth0 settings from shared to dchp automatic and then unplug the cable from the internet port on the router to one of the network ports. Is it possible to add another network card to the main machine and use that exclusively for either internet or file sharing.
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
I just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
I have a USB Tata Docomo (USB Modem to connect internet) lsusb shows
Code:
Did a lot of Googling etc on forums and seems a few people have been able to use it. 1) [url] 2) [url]
Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.
I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)
Quote:
Shows
Quote:
Quote:
My kernel is
Quote:
Quote:
Like this it keeps on repeating above steps. My service provider does not give a user name and password.
I'm running F12 on a Toshiba Satellite laptop. I don't have any problems connecting to eth0 or wlan0 when I'm at work or when connecting to a variety of cable modems, but for some reason I can't connect to AT&T/Bellsouth's dsl modem at my house (can't connect directly, much less through my DI-524 D-Link wifi).Does anyone have any idea why? I've been through every setting I can think of and I've stayed on the phone with techsupport for AT&T and physically watched as they've pinged and reset my modem, so signal into the house/modem is good....and I can hit the modem's IP and go through all of the configuration settings and everything from Bellsouth says that I'm connected and online, but when I attempt to go to another website like google or yahoo or fedora.com, I get a message telling me "Server at ******** not found."After spending 2.5 hours on the phone last night with tech support, I came into the office tonight and hooked right up to TruVista's (cable) network.
I have a huawei e230 modem that used to work pretty good until this week. It has always been much slower on linux than windows but I am not complaining because windows keep disconnecting ever hour or so, while linux can stay connected over night without problem. The modem is still recognized but when I try to connect it suddenly disappears.
Is it possible to use connect to the Internet using my internal modem which i have in my laptop using debian.. Please do help.Ofcourse i can do this with the windows 7 which is also installed in my lap.. I have a MSI laptop with model no. vr440..[color=#404040][/color]
Can I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
