I am using Ubuntu Server version 10.4, and am trying to connect to the internet via an ethernet cable. This may and probably is incredibly simple, however, I could not find anything that pertains to it.
I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
I cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect.
If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully.
This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home.
My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8
I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc. Results were no fix or solution. I feel like I'm headed down the wrong road. Would someone set me straight? I have a feeling this is simpler than I think.
Do I have to actually reset my own or someone's cable modem to get this to work? I don't want to do that unless there's no other way. Is there? Let me know what commands I can or should run.
I've recently bought a recycled computer for my office. The plan was to get an old cheap computer and use it to write LaTex documents but nothing else. However, I can't seem to get the thing to connect to the internet. I'm on a University network which has a funny setup but I don't think that's the problem.So here's the deal. I have tried this with 9.04, 10.04 and 10.10 and it hasn't worked. The computer recognizes the ethernet cable. If I issue the command "sudo mii-tool eth0" and get back "eth0: negotiated 100baseTx-FD, link ok". However, click on the networking logo on the top right, and click auto eth0, it tries to connect for about 30 seconds, then gives up. Unfortunately I'm pretty clueless when it comes to networking so I have no idea what to do to try to fix this.
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
I'm having trouble connecting to the internet... I'm using Ubuntu 10.04 on a PC with Windows XP installed. When I click the little network icon at the top there's an option called "auto eth1" but when I click it, it just says "Wired Connection: Disconnected - you are now offline."
I have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
I just built my first pc, installed ubuntu 9.10 and tried connecting to the net through my ethernet cable and all that happens is it says cannot find server. Do I need to install network settings & if so what & where,or should it automatically detect them? As this is my first build I am a novice but am willing to listen & learn.
I recently moved to a student dorm in my university (RWTH Aachen) and I have an ethernet connection from my room. The thing is that I can't connect to the internet, I don't get any IP through DHCP. I tried using wicd instead of network-manager, and doing it manually with dhclient. None of those worked (actually I don't know much about how networking works so maybe I didn't do it well with dhclient). The weird thing is that Windows 7 gets the IP instantly and I can connect to the internet from windows. But I don't know why Ubuntu refuses to get an IP. Info from lshw, lspci:
My WiFi can connect to internet without any problem, until I plug my ethernet cable ...then I lose internet.
So the question is : how do I configure my ip/dns and stuff to still have internet when I'm plugged by cable at the same time! it was working on windows ;-)
how to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
I am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
My laptop was on windows xp and when I installed ubuntu linux my NIC Card driver was gone (I think) and now I can't connect to the internet using an ethernet. I have the driver on the desktop of my Linux laptop but I don't know how to add it using terminal or any other options.
My router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
i have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
I have been using my laptop as a development machine for a few months now, developing php/mysql applications, and testing them offline via the same laptop by pointing the browser to url.
But a few days ago, my url stopped working and I discovered that it will now only work if I have an active internet connection plugged in. Why has this happened and how to I fix my test server so localhost works with or without an internet connection via an ethernet cable.
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial [sudo] password for chitra: --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATE0 --> Sending: ATQ0 OK --> Re-Sending: ATE0 OK --> Cannot get information for serial port ..... --> Initializing modem.