Ubuntu Networking :: Unable To Install The Usb Modeswitch Program?
Jan 11, 2010
i've recently bought a ZTE MG880+ modem of reliance and since then i'm trying to establish a net connection in 9.10 but failed. As i was searching for a solution i came to know about wvdial and usb modeswitch;i dwnlded both the programs in XP and installed only wvdial because i couldn't install the usb modeswitch program. But still i was able to modeswitch with the following procedure,-
note down the idvendor & idproduct with lsusb
sudo chmod 777 /lib/udev/rules.d/61-mobile-action.rules
sudo gedit /lib/udev/rules.d/61-mobile-action.rules
changed the default idvendor and idproduct with my own e.g 0x19d2:0xfff5
saved the file in downloads folder with name 90-mobile-action.rules
moved the file to /etc/udev/rules.d folder
reboot
After rebooting when i again plugged in the usb modem the lsusb command showed that idvendor:idproduct=0x19d2:0xfffe.So i think that mode switching is done but still i'm unable to connect to internet
View 1 Replies
ADVERTISEMENT
Oct 3, 2010
i'm having problems trying to get ubuntu to recognise my usb modem because its one of those "flip-flop"/"zero-cd" devices.okay so this is what is inside the usb-modeswitch.conf file
Code:
########################################################
# Huawei E169
[code]....
View 9 Replies
View Related
Jun 2, 2011
I have received a new huawei k3770 usb modem but ubuntu 11.04 (32 bit) picks it up as a cd rom but not as a modem. Modeswitch is installed and I have reinstalled it as well. I have googled it but I found nothing.
View 3 Replies
View Related
Feb 10, 2011
How-to install usb-modeswitch under Lenny?I cannot find it using apt-cache search.
View 2 Replies
View Related
Jul 28, 2011
I am having one Huawei EC156 modem for my wireless broadband connection. Everytime when I boot the machine, I have to run the following commands in the terminal. The commands are as follows
Code:
cd /etc/usb_modeswitch.d
followed by
Code:
sudo usb_modeswitch -I -W -c 12d1:1505
I would be very grateful if I can have a launcher which run this script automatically in terminal by clicking on it.
View 3 Replies
View Related
Oct 13, 2010
I use a ZTE 626 USB modem to connect to the internet (and yes, i am in the wilds of nowhere!) which using USB-modeswitch 1.1.0-2 and ubuntu 10.04 works well.
I just upgraded one machine to 10.10 and it included the new modeswitch 1.1.4 which does not work, the modem is never discovered. I searched around and found that this is a bug in the latest modeswitch and apparently if you back down to version 1.1.3 it works.
So, i have two questions,
first, where can i find version 1.1.3 of modeswitch. I have searched and cannot find older version than 1.1.4 as a .DEB file.
second, i do have a really old version of modeswitch (1.1.0-2) on my hard-drive and have been trying to load my older 1.1.0-2 version and am having real problems with it. I remove the 1.1.4 version and its data using the ubuntu software centre and it looks like it properly is removed. I then click on the .DEB file that contains 1.1.0-2 and it opens the software centre and installs it (the data seems to be automatically loaded as i never have to install that). I then search for modeswitch and the version that has been installed is the newer 1.1.4 one, not the older one i clicked on. I am confused as this computer is not attached to the internet but it seems to find the newer version from somewhere, uses it and therefore does not work. I presume the version 1.1.4 is cached somewhere and i am not able to clear it out.
Incidentally, the source of the information that i have so far is here:
[URL]
From reading this, i do understand that there is a problem, After reading this bug fix I tried editing the config file for the modeswitch modems and changing all of them to the format indicated, but no joy.
View 9 Replies
View Related
Jul 10, 2010
I am in the process of moving all my data from Windows to Ubuntu. So far everything has gone well and I am very impressed with Ubuntu and regret not doing this years ago.
One program is giving problems. It is a program called Sharescope and I pay a subscription for it and it runs in my Windows partition. I downloaded Wine and then downloaded Sharescope three times but when I click to install it comes up with the following message;
Archive: /home/johnlaptop/Downloads/SSGoldFull(3).EXE
[/home/johnlaptop/Downloads/SSGoldFull(3).EXE]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /home/johnlaptop/Downloads/SSGoldFull(3).EXE or /home/johnlaptop/Downloads/SSGoldFull(3).EXE.zip, and cannot find /home/johnlaptop/Downloads/SSGoldFull(3).EXE.ZIP, period.
I contacted Sharescope and they said it was a permission issue in Ubuntu. Is there any way to install this program or will I have to work with it in Windows?
View 3 Replies
View Related
Oct 5, 2010
I"m trying to kill some processes that are interfering with airmon-ngWhen I run airmon-ng and tell it to turn on monitor mode on a given interface it says:Code:Found 5 processes that could cause trouble.If airodump-ng, aireplay-ng or airtun-ng stops working aftera short period of time, you may want to kill (some of) them!
PIDName
20875wpa_supplicant
20879NetworkManager
[code]...
View 2 Replies
View Related
Apr 12, 2010
Whenever I try to install a program by Synaptic Package Manager, it downloads packages but it doesn't install those.It tries to connect to downloads.openwrt.org but unables to connect because of connection time out. I have attached a screenshot of it.
View 7 Replies
View Related
Apr 25, 2010
I get this message when attempting to copy file from usb drive to directory in system: missing destination file operand after `/usb0/Applications/Server/AirSync/Application/linux/airsync.bin'
View 3 Replies
View Related
Oct 29, 2010
I downloaded some application for Linux (program microcontroller LPCXpresso). When I trying to install it some error appears
Code:
Can't find a usable init.tcl in the following directories:
/installkitvfs/lib/tcl /installkitvfs/lib/tcl8.6 /home/damon/src/installkit-1.3.0/out/lib/tcl8.6 /media/lib/tcl8.6 /lib/tcl8.6 /media/library /library /tcl8.6b1.2/library /tcl8.6b1.2/library
This probably means that Tcl wasn't installed properly.I think Tcl is installed, maybe I need to reinstall it if so, how? What I need to do?
View 8 Replies
View Related
Mar 23, 2011
I installed via APT GET Modeswitch form my ZTE USB wireless modem. I need to know which modeswitch option is correct, and how to get Ubuntu 10.10 Studio to detect the modem in the my computer option. It only seems to detect a storage device.Using a Dell Inspiron Laptop.The modem glows green as it should, but no detection and connection.
View 3 Replies
View Related
Jul 13, 2011
I have use ubuntu for about 1 year.And i want to learn slackware.so I install slackware 13.1 in to my laptop.Then i try to connect to internet using my Huawei HSDPA mobile 3g dongle.Then i install usb modeswitch after reading several documentation in the internet.I follow the instruction in following documentation and try to configure etc/usb-modeswitch.conf using vi. But my usb-modeswitch.conf file is as follow and don't now how to configure.
# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
# This file is evaluated by the wrapper script "usb_modeswitch_dispatcher"
[code]....
View 11 Replies
View Related
Jan 6, 2010
Is it possible for two computers to access the same program from 1 system at the same time using remote x apps? In other words can a system have two instances of a program running and being utilized by two different computers remotely?
For example lets say I install Program X on Computer 1. I ssh into Computer 1 from Computer 2 and use remote x apps to use Program X. Is it possible for Computer 3 to ssh into Computer 1 and use Program X at the same time using it for a completely different task?
View 3 Replies
View Related
Dec 27, 2010
I downloaded the usb-modeswitch and usb-modeswitch-data as suggested by one of the users from [URL] but whenever I try to install after going to the folder using sudo make install, none of the packages get inatalled. I am a new user and I am using ubuntu 9.10. I want to use my MICROMAX 300G USB modem to surf internet but can not do.
View 2 Replies
View Related
Aug 9, 2010
Im currently unable to install a wireless USB network adapter because it requires an installation which can only be done with a cd and im not sure how to install the software to run the wireless adapter.
View 1 Replies
View Related
Nov 24, 2010
I am not able to install anything but stuff from fedora repositories. Let me show you:
Code:
[Vitaliy@localhost ~]$ su -c 'yum install gnome-commander'
Password:
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
[Code].....
View 1 Replies
View Related
Aug 14, 2011
I'm traying to remove several program, sucha as transmission, bunshee and other, I can't unistall them from the console by typing sudo apt-get remove ***, neither trhough synaptic, neither thru ubuntu softare center... each time I try to unistall I got the message that its being unistall but after it I open the softare just if like its properly installed.
View 2 Replies
View Related
May 6, 2011
I installed Fedora fc14.i686 in a VMware player. I have been able to install many packages off the web.
First of all, I'm having this issue: I am having trouble with GIT, it keeps timing out on me. github.com[0: 207.97.227.239]: errno=Connection timed out fatal: unable to connect a socket (Connection timed out). This is happening over a 24hr period so I think its something on my end.
Also, my apache directory is not visible on my local LAN to other machines. I can browse in Fedora, however. Even the machine hosting the VM can't see my var/www/http directory. I set permissions but I have a feeling its a network issue somwhere. BTW, I can ping the Fedora VM (192.168.0.17) from other machines.
View 1 Replies
View Related
May 14, 2010
I am trying to install ultamonkey and i have problem ipvsadm command. Whenever i run this command i got
IP Virtual Server version 1.2.1 (size=4096)
Module is wrong version
Can anyone give any solution for that.
View 1 Replies
View Related
May 5, 2011
I am using squid as a proxy server in my cent os 5 machine. I have downloaded and install squidGuard-1.4 using ./configure which it successfully do.THe problem is when I use make command it give me an error beacuse may it it is not compatible with BerkeleyDB. For
Code:
[root@localhost squidGuard-1.4]# make
making all in squidGuard-1.4
make[1]: Entering directory `/home/squidGuard-1.4/src'
[code]....
I am sure that it is due to patch missing .For that purpose I have download the patch "squidGuard-1.4-patch-20091015" and then extraxt it (untar) it. THe patch shows only these two files
Code:
[root@localhost squidGuard-1.4-patch-20091015]# ls
Readme.Patch-20091015 sgLog.c
I does not know how to apply the patch with currect squidGuard ?
View 9 Replies
View Related
Aug 2, 2010
I have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 2 Replies
View Related
Jan 23, 2010
I am running firefox, and when I minimize a programme I "lose" it completely in the bottom right hand corner of my screen and unable to re-call. Have i fiddled with something to create this stupid error.
View 2 Replies
View Related
Oct 2, 2010
I'm attempting to install a command-line version of Maverick, from the alternate CD. I'm using the 64-bit version. The installation has gone fine - however, I'm having troubles getting the wireless to work. I've installed wireless-tools by carting the *.deb archive over from another computer - this seemed to go fine, and iwconfig shows my wireless card as "wlan0". However, even after setting the essid and the WEP key I can't connect to the internet (tested this using apt-get). I know that this wireless card requires the "rtl8187se" module, which automatically loads with the desktop version of Maverick - however, it isn't working on the command-line. Running "sudo modprobe rtl8187se" pings back an error message saying that the module can't be found. Is there a way for me to manually install it or "find" it?
View 1 Replies
View Related
Oct 12, 2010
When I download the drivers for my Broadcom card (BCM-4312), I get this error message:
Quote:
SystemError: installArchives() failed
Is there any way to fix it, or should I post to launchpad about a bug? I have 10.10. Update: When I install from the Ubuntu Software Center, it completes successfully, but I get this error message: installArchives() failed: Selecting previously deselected package glines.
Quote:
(Reading database ...
<snip>
(Reading database ... 100%
(Reading database ... 131362 files and directories currently installed.)
[code].....
View 3 Replies
View Related
May 2, 2011
I installed natty finally on my laptop (T410 Lenovo) via an upgrade from maverick. I tested maverick thoroughly first, since I had to perform the upgrade over the network, due to issues with natty booting from DVD. The upgrade went fine to natty, the system came up and I was able to get on locally and install other packages, though I did notice from time to time a lag in network performance. I installed VNC server and started it, as well as other network related services. However, I am noticing a definite issue with the network support and I suspect the natty kernel. The configuration looks sound, ifconfig, netstat and other functions appear to display the correct information, at least what I had with maverick (which worked).
Has anyone else seen issues with natty and networking? The glass looks okay, though I am using xfce and frankly there is nothing new there to really force me to upgrade, its just that this is a new LT and if I can cold install natty right now, it will save me an upgrade later.
System configuration (lshw) is below, ipaddress removed to protect the guilty..:
description: Notebook
product: 2522AP1 ()
vendor: LENOVO
version: ThinkPad T410
serial: R8M9B2Z
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
[Code]...
View 4 Replies
View Related
Jun 3, 2010
I have downloaded the jdk-6u20-linux-i586.bin from their website. I also read the instruction given to install jdk manually but i was not able to run a single program. Can someone give a step by step instruction to install jdk and also tell me how to set the path so i can easily execute the programs.
View 9 Replies
View Related
Jul 14, 2010
I was running 9.04 and could, through some magical sequence of toggling options that I was unable to figure out, occasionally get recording from the mic to work in audacity. Ardour worked more reliably, but is kind of over-featured. Audacity is simpler and I know how to get things done. For a while, I was doing basic recording in Ardour, saving it to wav then editing in audacity.
Well, I noticed a howto on getting audacity working in 9.10... so I upgraded ("what could possibly go wrong?"). I still can't record audio in audacity and ardour is now ALSO unable to record audio. They start recording samples but nothing comes in but silence. I've got audacity set to ALSA/default/default and when I click monitor, the stream appears in the pavucontrol app. I've moved it to the input device and that doesn't seem to affect the results at all. Everything looks like it should be working fine except there's some invisible mute button, or something. Under alsamixer's Capture section, Mic has a red "CAPTUR" with no bar to adjust.
View 9 Replies
View Related
May 5, 2010
we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
View 9 Replies
View Related
Mar 7, 2010
However i am unable to find the Run program. It was easy to find on the other Distro's i have tried but i have been unable to locate to in Fedora 12.
View 3 Replies
View Related
