Ubuntu Networking :: HP 2740p 3G Module Un2420?
Dec 23, 2010I have a problem with 3G module un2420.Once loaded system lsusb does not show Qualcomm module.What is a problem?My system is Ubuntu 10.10 with Kernel 2.6.35-24.
View 9 Replies
ADVERTISEMENT
Fedora Networking :: Getting A Gobi Un2420 Internal 3g Modem Working In FC13?
Jun 25, 2010getting a gobi un2420 internal 3g modem working in FC13?
View 8 Replies View RelatedNetworking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?
Jun 1, 2009When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Ubuntu Servers :: Enable The Rewrite Module In Apache To Enabled The Module?
Jan 28, 2010I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
Ubuntu :: Error While Hash Checking Of Torrent - The Sha Module Is Deprecated - Use The Hashlib Module Instead From Sha Import Sha
Jun 8, 2010Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
Hardware :: Partport Module Is Seeing Parallel Port But Lp Module Doesn't Found Any Device
Mar 3, 2011I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedGeneral :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedGeneral :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27
Jan 30, 2011I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
Ubuntu Networking :: How To Add A Wireless Module
May 8, 2010I have a Toshiba Satellite 505D, and because of ACPI issues I had to compile a custom kernel. [URL] Everything works except the wireless is broken. My network card is a RTL8101E/RTL8102E. The driver is r8169. The new kernel does not load the wireless driver at boot up.At the terminal, I typed sudo modprobe r8169 to load the driver. Then I typed dmesg | grep -i r8169, and I got back the response
bob@bob-desktop:~$ lsmod | grep -i r8169
r8169 39454 0
mii 5237 1 r8169
This, I think, tells me the driver is there. However, when I type iwconfig, I get the response "no wireless connection"
Ubuntu Networking :: Old Module In Newer Kernel?
Aug 23, 2010I got a engineering sample wifi card - Intel wimax 5350. This card work well with kernel 2.6.28-15-generic and earlier kernels.
However after kernel 2.6.28-16 , this card no longer support by newer kernel.
the error is "Unsupported EEPROM VER=0x21b < 0x21e CALIB=0x4 < 0x4"
I knew the reason is that card is a Engineering sample .. it should not get support in newer version kernels.
What i try to think is that "is it possible to replace old wifi module into the new wifi module in new kernel " and the system can also get works !?
Below is message of dmesg.
------------------ Kernel version : vmlinuz-2.6.28-15-generic
[ 11.683885] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 11.683888] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[Code]....
Ubuntu Networking :: Wireless And Lan Driver Kernel Module?
May 1, 2010what is name of modules in kernel for wireless and lan driver ?
View 1 Replies View RelatedUbuntu Networking :: Bcm4318 And 10.04 Lucid / B43 Module Working Instead Of Ndiswrapper?
Jun 17, 2010I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?
View 2 Replies View RelatedUbuntu Networking :: Rt2860 Kismet Power Always Says 0 How To Load Module?
Jun 26, 2010I have a WS- something or other by gigabyte, it has the "ralink rt2860" chipset according to lspci.
It works well the only problem is in kismet or airodump-ng the power always shows as 0.
In the kismet.conf i had to set the source to rt2500, it does not seem to like rt2860 or rt2x00.
In airodump-ng it always says "chipset: ralink 2560pci" and "driver:rt2500"
Is there any way i can use the rt2x00 drivers, would they allow for more things ?
Whats funny is that network manager can see the signal strenght of all the sources.
Ubuntu Networking :: PCIe-WiFi Module Doesn't Work?
Jul 9, 2010Got notebook HP 6530b with Intel 5100AGN PCIe WiFi module in and desktop ubuntu 10.04 from [URL].
Can i make this one works any way exclude ndiswrapper.
lshw -c network
http://img695.imageshack.us/img695/1...eenshot2th.jpg
lspci
http://img819.imageshack.us/img819/1...reenshothy.jpg
uname -r
2.6.32-23-generic
Ubuntu Networking :: Compatibility Between Routers And Built-in Wireless Module?
Sep 2, 2010I was going to buy a TP-link wireless router (802.11b/g/n) but while I was reading the consumer's reviews I saw some people were saying that they couldn't make it work with ubuntu. So, I'm starting wandering if there is somewhere any compatibility list? I mean if for instance TP-link or D-link would work with broadcom's chip. I would like to use my laptop's built-in wireless module which is HP Broadcom corp. BCM4306 802.11b/g. My laptop is a HP Pavilion zv6000.
View 2 Replies View RelatedUbuntu Networking :: Download The Proper Driver For Wifi Module?
May 22, 2011where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
Ubuntu Networking :: HP Dm 1-3025dx \ Compile A Module To Get The Wireless To Work?
Jul 24, 2011This is solved go to page #2 for instructionshis link will help show my netbook wireless situation:http://wontek.com/laptops/laptops/hp...-3025dx-reviewA quick read of the article says I need to compile a module to get the wireless to work... ??? Now I'm lost... can anyone point me in the right direction to compile a module?? and what exactly would that be doing???I believe I need this wireless driver: Ralink 2011 802.11 b/g/n WiFi Adaptercomputer: HP dm 1-3025dxOS: Ubuntu 10.04 Netbook
View 9 Replies View RelatedFedora Networking :: Iwlagn Module Seems To Be Crashing / Fix It?
Jul 10, 2009I have an Intel 4965 Wireless NIC and from time to time it crashes. I have been looking in my log and found these messages code...
View 1 Replies View RelatedNetworking :: IPtables And Rate Limit Module
Apr 8, 2010I'm a newbie in the world of netfilter/iptables. I've read an article about iptables and rate limit module:
Code: iptables -A INPUT -p ICMP --icmp-type echo-request -m limit --limit 1/minute --limit-burst 5 -j ACCEPT The firewall will let the first 5 packets in in the first minute, -limit-burst 5; this means, however, that the packets/minute now is 5, so any further packets are blocked until packets/minute = 1, i.e. 5 minutes later. In the sixth minute, packets/minute will be 5/6 < 1, so another ping request will be let in. When the extra ping request is admitted, the ratio becomes 6/6 = 1 again, and packets are DROPped again until the next minute.
Now I have some problems in understanding how it works.
For example: I want ping google.com in this way: the kernel firewall permits to send the first 5 packet to google.com (--limit-burst 5) and then it blocks the remaining packets for 5 minutes. At sixth minute (because I wish a limit rate equal to 1/minute: --limit 1/minute) one packet can send to google again. And so on.
So my rule should be:
Code: iptables -A OUTPUT -d url_of_google -p icmp --icmp-type echo-request -m limit --limit 1/minute --limit-burst 5 -j ACCEPT In this way, if i digit
Code: ping -f url_of_gogle I expect that the first 5 packets are accepted (and so zero '.' will print on the screen) and then for the remaining 5 minutes no one packets will be accepted (and so a long string of '.' will print). But it doesn't work...
In man pages of ping we read (about -f option):
-f Flood ping. Outputs packets as fast as they come back or one hundred times per second, whichever is more. For every ECHO_REQUEST sent a period ``.'' is printed, while for every ECHO_REPLY received a backspace is printed. This provides a rapid display of how many packets are being dropped.
Networking :: Any Way To Load Ndiswrapper Module At Boot?
Jan 9, 2010I'm running Fedora 12 LXDE spin on a netbook (Asus EeePC) and have successfully installed a wireless driver using ndiswrapper. The only problem is that every time I reboot, I need to use the "modprobe ndiswrapper" command to load the module.
Is there a way to load the ndiswrapper module during the boot process?
Networking :: Install Nf_conntrack Module In RHEL?
Apr 6, 2011I tried installing nf_conntrack module in RHEL , it fails
[root@boot]# modprobe nf_conntrack_ipv6
FATAL: Module nf_conntrack_ipv6 not found.
[root@boot]# modprobe nf_conntrack
FATAL: Module nf_conntrack not found.
[root@boot]# lsmod | grep -i nf
nfnetlink_queue 16129 2
nfnetlink 10713 4 nfnetlink_queue,ip_conntrack
[Code]....
Networking :: Insert Module In System Run On AT91SAM9261EK?
Mar 7, 2011When I tried to insert module in my linux system run on AT91SAM9261EK , I've got something like :
[Code]...
I suspect I have missed some kernel settings when I compiled my kernel so that the kernel cannot recognize those functions ..
Ubuntu Networking :: IPtables NAT Rule Setup - Unknown Symbol In Module
Nov 16, 2010Trying to setup my box as a router on Ubuntu 10.04. When trying to setup a NAT rule in iptables 1.4.4 like so:
Code:
sudo iptables --table NAT --append POSTROUTING -o eth0 -j MASQUERADE
I keep getting:
Code:
Can't initialize iptables table 'NAT': Table does not exist (do you need to insmod?)
Looking at lsmod, it doesn't look like I have anything NAT related loaded ( I just have iptable_filter, ip_tables, and x_table ). Doing a locate nat, I find a module that looks like it should work. I'm running 10.04.1 LTS - Kernel is 2.6.32-25-generic #45-Ubuntu SMP and it is pretty much stock - haven't done anything fancy... this module looks promising:
Code:
/lib/modules/2.6.32-25-generic/kernel/net/ipv4/netfilter/iptable_nat.ko
but loading it and I get:
Code:
-1 Unknown symbol in module
OpenSUSE :: "canberra-gtk-module" Error Failed To Load Module "canberra-gtk-module"
Jan 28, 2010OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
Fedora Networking :: F12 2.6.32.14-127 Kernel Update Has No Rt2870 Module?
Jun 16, 2010since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies View RelatedNetworking :: Close A Kernel Module Network Socket?
Feb 10, 2010I opened a socket with sock_create()... bind() listen() accept().
Then, the far end closes the connection.
I want to close the near end, so I can re-open for the next connection.
But there is no close(), and sock_release() crashes the kernel.
Networking :: Wifi Rt8192e Not Loading Module On Startup?
Feb 18, 2011download new driver compiled and installed boot it is not loading. uname=Linux Kev 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
lsusb=
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
CentOS 5 Networking :: IPtables Module Load Fail
Apr 10, 2010I'm encountering a known problem with IPtables. I set up rules and apply them, restarting firewall, then I get this message:
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: raw nat mangle filter [ OK ]
Applying iptables firewall rules: [ OK ]
Loading iptables additional modules: ip_conntrack_ftp ip_conntrack_netbios_ns [FAILED]
Programming :: Load Fortran Module For Matio Libraries Using Gfortran - Can't Open Module File 'matio.mod' For Reading
Jun 27, 2010I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
Ubuntu Networking :: Unable To Use Zonet ZEW2500P Module - NetworkManager Won't Start On Booting
May 2, 2010After upgrading to Lucid said adapter is nonfunctional - NetworkManager won't start on booting (I'm using 2870sta module) and it finds no networks - neither does WICD. The device itself is identified: "lsusb" gives a line "Bus 001 Device 005: ID 148f:3070 Ralink Technology Corp." "iwconfig" gives nothing under lo and eth0 and this under wlan0:
Code:
RTxx70 Wireless ESSID:""
Mode:Auto Frequency=2.412GHz
Link Quality=10/100 Signal level:0 dbBm Noise level:-143 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
And a "lsmod | grep -e rt2 -e rt3" gives:
Code:
rt2870sta 525366 0
(Note: I had a similar problem going from Jaunty to Karmic, but blacklisting rt2800usb in my blacklist.conf fixed it. No such luck this time.)Using a Zonet ZEW2500P.x86-64 Lucid.