Ubuntu Networking :: Error - Vendor Request 0x06 Failed For Offset 0x3040 With Error -110
Feb 12, 2011
Having a problem with my Belkin wireless adapter when trying to stream music to my Pinnacle Soundbridge.The network connection is usually rock steady but drops anywhere between and few second and a few minutes after streaming music. Network manager still shows the connection to my home network as active but it is not. The connection comes back when I unplug the dongle and plug it back in. I found the following message repeated in the syslog
phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110
Only thing I have noticed is that it refers to rt2x00 when I had thought it used the rt73usb driver.Had the PC and the Soundbridge for a number of years without any problems but I did recently have to reinstall Ubuntu from scratch. Currently running Ubuntu 10.10
View 4 Replies
ADVERTISEMENT
Mar 15, 2010
I'm working on a old piece of code on linux, after compiling without porblem at the execution I have this response:
src/xproject/xproject: Ok, a color display! :-)
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 78 (X_CreateColormap)
Serial number of failed request: 7
Current serial number in output stream: 15
looking at the source code I think the problem is related at the depth of my system 24 bit and the depth of this old piece of code 8 bit. Unfortunately also I don't have experience in programming the XVideo and if someone can give me some help in programming the XVideo interface
View 5 Replies
View Related
Jan 15, 2010
I just made a fresh installation of Ubuntu Karmic, but I can't set up my screen resolution correctly. My monitor resolution (1680 x 1050) is not listed in 'Display Preferences' or in my card's proprietary software (ATI Catalyst). The maximum resolution I can select is 1440 x 900.xrandr detects a maximum resolution of 1440 x 1440 and displays the same list of screen resolutions as 'Display Preferences'.
But when I enter the line:
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
I always get this message:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 156 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
[code]....
View 2 Replies
View Related
Jul 10, 2011
During installation at, Select and install software, i had this extra option "Packages to install: rt2x00-source", and answered yes. sources.list has main and contrib sections.
lspci -k
Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: Linksys WMP54G ver 4.1
Kernel driver in use: rt61pci
ifup wlan0 returns this,
SIOCSIFFLAGS: No such file or directory
[Code]...
View 5 Replies
View Related
Jun 15, 2010
I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
View 2 Replies
View Related
Feb 22, 2011
when i ran amcheck DailySet1 as backup user and got these messages:
[Code]....
View 3 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Nov 9, 2010
I use slackware current, and curl and wget give the following errors:
Code:
repo@cannabis ~]$ wget -r http://users.telenet.be/reggersjans
--2010-11-09 13:48:14-- http://users.telenet.be/reggersjans
Resolving users.telenet.be (users.telenet.be)... ::ffff:74.117.221.11, 74.117.221.11
Connecting to users.telenet.be (users.telenet.be)|::ffff:74.117.221.11|:80... connected.
HTTP request sent, awaiting response... 400 Bad Request
[Code]...
View 7 Replies
View Related
Sep 8, 2010
I need a way to find out what my dhcp vendor-class or vendor string is on a device. I want to take a client and based on the vendor string (if I can get what that string is) set up a pool for it.
View 1 Replies
View Related
Nov 12, 2010
Although Win7 is not bad either, I'm really happy using new Ubuntu Maverick Meerkat on my notebook. Since I've been using Linux (SimplyMepis, then Arch) on my desktop, I'm really happy that I found a Linux distro which suits me the best. BTW, I have a Toshiba T130-10g which I love for its long battery life. However, I would like to solve some issues/dilemmas/questions (and I searched for s the solutions of some of them on Google so please don't tell me to use it...)
1) How do I turn off Wifi completely in a comfortable way? I tried sudo iwconfig wlan0 txpower off but it threw: Error for wireless request "Set Tx Power" (8B26): SET failed on device wlan0 ; Operation not supported. I even edited something in interfaces configuration file, but it did nothing. Oh, I forgot, my notebook doesn't have a hardware switch to turn off wifi.
2) Setting brightness doesnt work for my laptop. I can set it by udo setpci -s 00:02.0 F4.B=25 but I'm looking for a more comfortable solution. BTW, editing one GRUB configuration file didn't help and ended in booting into command line (it was something with adding backlight=vendor or something like that...)
3) My touchpad is sometimes too sensitive and clicks somewhere sometimes when I don't want to it. How to make clicks less sensitive? I tried to play with some mouse settings but it didn't help much but perhaps I'm setting a bad parameter.
4) I remember that back in KDE 3.5 times a network manager icon had a setting to switch on net statistics so I could very easily see how much I downloaded every day. But, since KDE 3.5 is not supported anymore, I stopped using it in refusal to update to KDE 4.XX and switched to GNOME. Since for some months I'll have a limited download connection, is there something esay in GNOME to watch my net statistics that wouldn't be deleted after reboot/shutdown?...
View 1 Replies
View Related
Mar 15, 2010
I am dualbooting Karmic, windows 7, and fedora. When I boot, Grub2 will boot everything but Windows 7. Instead it says:
Code:
reloc offset is out of the segment
abort.
I've tried reinstalling and updating grub2 and I also tried grub. It wasn't a problem until I put Lucid on a 4th partition that's always been there. I let lucid install grub2 and after that windows didn't work, but I got the same error when I reinstalled it from karmic. I got a different error from grub (that I don't remember), but I wasn't positive about the configuration so that may have been my fault.
View 1 Replies
View Related
Mar 31, 2010
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
View 4 Replies
View Related
Jan 10, 2011
I have had a strange experience in upgrading to Ubuntu 10.10 on a Dell Inspiron 1545 also running Vista. I was upgrading from a Ubuntu 8.04 that I thought would be worth reporting/sharing in case others have had a similar experience. last week I upgraded to Ubuntu 10.10 using the live cd. Everything seems have gone smoothly. I could log in and out of ubuntu. After logging into Vista and logging out, the next time I tried to start the machine, there was a 'segment offset error' with the boot loader and there was no way of rebooting into anything except to use the Ubuntu live CD and go to a terminal and reinstall the bootloader. The same thing happened after logging in to Vista- this seemed to mess with the boot loader. Logging in first time was not a problem.
Yesterday I started again, wiped out 10.10 and re-installed ubuntu but version 10.04. Logging in and out of Vista is so far ok and I have not had any problems. I do not have an obvious logical explanation to the sequence of events unless there is a problem with the boot loader in version 10.10.
View 1 Replies
View Related
Aug 1, 2009
Since installing F11, my Canon LIDE 50 scanner refuses to work. xsane 0.996 produces an error message: Failed to start scanner: Error during device I/O.
sane-find-scanner says it is there: found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841?) at libusb:001:006 But scanimage -L claims: No scanners were identified.except once when it admitted: device `genesys:libusb:001:006' is a Canon LiDE 35/40/50 flatbed scanner
I reluctantly tested the scanner on a Windoze machine and it works perfectly. And it worked perfectly under F10.
View 9 Replies
View Related
Nov 2, 2010
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies
View Related
May 1, 2010
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies
View Related
Dec 25, 2010
yesterday i update my ubuntu 10.04 lts, and began the problens. i am using 2.6.32-24-generic, in a HP DV6 2145es do we know?
syslog saidme: wpa_supplicant[1093]: Association request to the driver failed search in google i founded that the problem is possible that it is in wpa_supplicant.conf. my fiel is in : /etc/dbus-1/system.d/wpa_supplicant.conf and i think that is necesary be in /etc . it is truh? when i check my fiel, i founded this:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
[code]....
View 7 Replies
View Related
Aug 26, 2009
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies
View Related
May 17, 2011
I upgraded a system from 10.3 to 11.4 and I get the following error when trying to run mysql:
Will update MySQL now, if you encounter any problems, please read following file:
/usr/share/doc/packages/mysql-community-server/README.SuSE
Log files inconsistency, please merge following files manually:
/var/lib/mysql/mysqld.log
/var/log/mysqld.log
How can I correct this? Mysql will not start so I can not run any of the utilities.
View 2 Replies
View Related
Jun 14, 2010
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
View 5 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Nov 1, 2010
I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:
image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?
View 4 Replies
View Related
Feb 26, 2010
Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed
php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed
patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[Code]...
View 6 Replies
View Related
Jan 28, 2011
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies
View Related
Sep 1, 2011
i've installed nagios just from a while and after i installed centreon, since this when i try to log in the web interface of nagios it shows up this message: Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.17 (Ubuntu) Server at localhost Port 80
View 1 Replies
View Related
Feb 4, 2010
I have successfully connected to my ubuntu server from XP using VNC over SSH from within my internal network.But when I try from an external network I can SSH but VNC times out. Using netstat I see vino server listening on 5900. Using ps -ef I see vnc and vino-server and vino. In auth.log I see :
Feb 4 17:07:25 DellD600 sshd[8754]: error: connect_to 123.243.**.** port 5900: failed.
Feb 4 17:11:14 DellD600 sshd[8754]: error: connect_to 123.243.**.** port 5900: failed.
These entries coincide with when vnc times out, after a minute or so. I have tried realVNC and TightVNC with similar results. Im connecting specifying localhost in VNC and port 5900 in and out in putty - same as I do when connecting locally. The error messages dont give me a lot to go on. Im assuming the problem must be on the ubuntu server itself since Im getting in through SSH and hitting the logs ?
View 9 Replies
View Related
Mar 2, 2010
I can not install files RPM, says there is error in the request.
View 1 Replies
View Related
Aug 10, 2010
End_request: I/O error, dev sds, sector 420656157
EXT3-fs error (device sda2) : ext3_find_entry : reading directory # 52527153 offset
What is this Above Error which I am getting , on my server
View 3 Replies
View Related
Jan 24, 2011
i set up openvpn on server and configure it then create license file for client and done the rest but when the client want to connect i got the following error :
TLS Error: TLS key negotiation failed to occur within 60 seconds
and now the strange part is if i connect my pptpd connection ( which runs on another server ) and then connect openvpn again i connect instantly without any problem or error in my country im sure there is heavy firewall on all outgoing traffic but currently i do not understand what can cause this problem
i ran tcpcump and seems server receive packets and send it back to client ( though im not sure if client can get the response ) this is my server.conf
Code:
local myserver ip #Replace with your server IP address
port 443 #Replace with the desired port
proto udp #Choose between tcp and udp (remove instructions in bold)
[code]...
View 2 Replies
View Related
Jan 16, 2010
I have been working on this for a while now and am absolutely stumped. Basically, what i am attempting to do is make my ubuntu box into a gateway for my network. I have everything working thru hard wire, but I simply cant get the wireless to work. No matter what I do, I cannot get my wireless card to transmit an essid and allow nodes to connect. I have tried assigning it in the interfaces file (shown below), and I have also tried manually modifying it using the iwconfig command. Here is the topology:
eth1: internet WAN
eth2: ethernet out to LAN
ra0: wireless out to LAN
Here is a copy of my /etc/network/interfaces file:
[CODE]
auto lo
[Code]...
View 2 Replies
View Related
