I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
I installed amanda on a client that uses Red Hat Enterprise Linux 4. When I do an amcheck from the server, I get this:
Amanda Backup Client Hosts Check
--------------------------------
WARNING: 192.168.3.23: selfcheck request failed: recv error: Connection reset by peer
Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ACK error if I switch the client to bsd authentication. I read that I should enter servers adress to hosts file in /etc/ directory?
when i ran amcheck DailySet1 as backup user and got these messages:
[Code]....
When I do an amcheck, I get this Amanda Backup Client Hosts Check WARNING: noname.com: selfcheck request failed: recv error: Connection reset by peer Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ack error if I switch the client to bsd authentication. What should I do, how do I fix it? I read that I should enter servers address to hosts file in /etc/ directory? Here is the log in /var/log/messages:
[Code]....
Amanda Backup System - Error
I have attached the error with amanda system. It is in Amanda is in OpenSuse, I checked for dtimeout in conf file but it is not there.
driver: find_diskspace: time 1641.864: find diskspace: selected /sandata/amanda/hdisk free 159240608 reserved 4633344 dumpers 3
driver: find_diskspace: time 1641.864: want 3185984 K
driver: find_diskspace: time 1641.864: find diskspace: size 3185984 hf 159240608 df 159240576 da 3185984 ha 3186016
driver: find_diskspace: time 1641.864: find diskspace: selected /sansdata/amanda/hdisk free 159240608 reserved 3186016 dumpers 3
driver: state time 1800.609 free kps: 1079613 space: 159240608 taper: idle idle-dumpers: 3 qlen tapeq: 0 runq: 7 roomq: 0 wakeup: 0 driver-idle: client-constrained
driver: interface-state time 1800.609 if default: free 79613 if LOCAL: free 1000000
driver: hdisk-state time 1800.609 hdisk 0: free 159240608 dumpers 3
driver: result time 1800.729 from dumper2: FAILED 02-00003 "[data timeout] .....
I am facing following problem when i want to start the databasewith enterprises manager .I search for the answer but nothing is workingI have install oracle 10g on fedora 12
View 1 Replies View RelatedI tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedI now have a .tar.gz that has been created during my script, and finnaly i need to upload it via ftp to my computer, but i am unable to because i keep getting the "Connection refused" error, despite the fact that all the syntax appears to be right. in a bout of frustration, i have deleted the code and now no longer have what i had written.. so could someone please let me know the syntax to upload a file to a server? I am aware that other threads have been started about this issue but I am trying to ftp from an iPhone to a computer...
View 4 Replies View RelatedI Get message Connection refused when trying to connect to other computer in network. My System Ubuntu:
computer1 ip: 10.0.0.1
computer2 ip: 10.0.0.2
computer1 shell:
$ ftp
ftp> open 10.0.0.2
ftp: connect: Connection refused
I've used fetchmail for quite a while now and never had a problem, until (without having changed anything) today it suddenly quit working, giving me the error message:
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused.
fetchmail: SMTP connect to localhost failed
fetchmail: SMTP transaction error while fetching from stefan%mydomain.com@mail.mydomain.com and delivering to SMTP host localhost
fetchmail: Query status=10 (SMTP)
I googled the error message, but didn't find anything that look promising. I use ubuntu 10.4.
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
Server details :
Red Hat 4.1.1-1
Having a problem with my Belkin wireless adapter when trying to stream music to my Pinnacle Soundbridge.The network connection is usually rock steady but drops anywhere between and few second and a few minutes after streaming music. Network manager still shows the connection to my home network as active but it is not. The connection comes back when I unplug the dongle and plug it back in. I found the following message repeated in the syslog
phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110
Only thing I have noticed is that it refers to rt2x00 when I had thought it used the rt73usb driver.Had the PC and the Soundbridge for a number of years without any problems but I did recently have to reinstall Ubuntu from scratch. Currently running Ubuntu 10.10
when i typed command /usr/sbin/amcheck intra on client side i got following error.(expecting a new tape)
NOTE: info dir /var/log/amanda/intra/curinfo: does not exist
NOTE: it will be created on the next run.
NOTE: index dir /var/log/amanda/intra/index: does not exist
NOTE: it will be created on the next run.
We have a working backup script which gave no problems ever. But recently the backup is failed giving following error messages,
Statement just before the error occured was, /usr/bin/rsh remoteserver1 /tmp/backup/script.scr
1. The system has no more ptys. Ask your system administrator to create more.
2. The system only has a finite number of ptys and you have many of them in use. The usual reason for this is that you forgot (or didn't know) to call "wait" after closing each of them.
So it looks like the system is falling short of the /dev/pty ...atleast I think so. Dont know the real reason.
Whenever I try to take backup from webmin I get following error message.
Starting backup of module configuration files to /Applications/backup.tar.gz ..
.. failed! TAR failed :
I don't understand meaning of this error.
I'm working on a old piece of code on linux, after compiling without porblem at the execution I have this response:
src/xproject/xproject: Ok, a color display! :-)
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 78 (X_CreateColormap)
Serial number of failed request: 7
Current serial number in output stream: 15
looking at the source code I think the problem is related at the depth of my system 24 bit and the depth of this old piece of code 8 bit. Unfortunately also I don't have experience in programming the XVideo and if someone can give me some help in programming the XVideo interface
I'm currently trying to install TSM backup client 5.5.2 and getting dependency errors when i do the following rpm -i TIVsm-API.i386.rpm
[Code]...
linux version : Linux version 2.4.9-e.27smp (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-118.7.2))
I've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?
View 2 Replies View RelatedERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies View RelatedI need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.
I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.
Here's what I tried:
Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)
Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.
I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.
In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.
Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.
I am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies View RelatedSince last Friday I get the following error when trying to upgrade packages with yum: [URL]: [Errno 4] IOError: <urlopen error (111, 'Connection refused')> Trying other mirror." The content of dag.repo:
[Code]..
During installation at, Select and install software, i had this extra option "Packages to install: rt2x00-source", and answered yes. sources.list has main and contrib sections.
lspci -k
Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: Linksys WMP54G ver 4.1
Kernel driver in use: rt61pci
ifup wlan0 returns this,
SIOCSIFFLAGS: No such file or directory
[Code]...
I'm fairly competent with Linux at this stage and as we have just installed a new Red Hat 5.5 Server to host our DB at work it has basically fallen to me to sort everything out. The only thing I'm not 100% on is a backup strategy at the moment. Basically, the server / DB is not that big and as such we will be doing a full backup every night of the whole file system.
As it is there are several LVM partitions across several disks (these are all virtual both on the SAN and as a virtual machine). My question is what would be the best way to create a full backup overnight of the whole server including all the partitions (or a backup of each partition I'm guessing is more feasible). This doesn't seem to be too difficult to do, but my main problem is restoring the backup.
Is it a simple matter of basically .tar'ing the whole / filesystem? and if so, to restore can I just use a live CD to restore the partition that is needed? How does LVM affect the restoration process? I have looked at Amanda as a backup solution, though we wont be backing up directly to tape (backup to a share location then copy to the tape drive).
I am facing connection refused error 111 in TCP client server program, in android native code which in C , but if code is in JAVA it works fine, but i want to continue in C only, in manifest file i have given permission and ip, port is correct .What am doing wrong?? or is their any network setting?? am using UBUNTU 10.04and If both client server Linux pc it works fine. only if android emulator becomes client then am getting connection refused
View 1 Replies View RelatedI have configured a Nagios server which is working well with all king of clients. But when I added a new windows machine to monitor, it gives a error message "connection refused". I have set everything as prior machines.
Now, I just wanted to know the process by which we can check if server is able to communicate with the client's NSclient daemon. In Linux, we simply issue "./check_nrpe -H hostname" and if ok, it gives the NRPE version which indicates the status ok.
I just made a fresh installation of Ubuntu Karmic, but I can't set up my screen resolution correctly. My monitor resolution (1680 x 1050) is not listed in 'Display Preferences' or in my card's proprietary software (ATI Catalyst). The maximum resolution I can select is 1440 x 900.xrandr detects a maximum resolution of 1440 x 1440 and displays the same list of screen resolutions as 'Display Preferences'.
But when I enter the line:
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
I always get this message:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 156 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
[code]....
I'm try to setup a database server using mysql, the server starts fine, and I can access it using the built in mysql client via console (adding databases and tables works fine), but the problem is... I always get a connection refused error whenever I access the database outside the built in mysql client (example, if I write a code that connects to mysql). So, I tried execute an nmap command and the only ports open are these ports:
[Code]....
there's no 3306 for mysql... I'm thinking that the firewall is just blocking the port that mysql is using, but my question is, how could the built in client connect to the server if there's no open port for mysql server? Don't clients usually access a servers through ports?
Please help me figure out what's wrong. Other nagios check for the same host is working except for this one.In <hostname>.cfg of nagios server, I need to add this to check for a specific pattern in the host's log:Quote:
define service{
use production-logs
host_name hostname
[code]....